How to work in the photoshop CS5 program. How to quickly learn to work with Photoshop and what version it is better to use. - PHOTOSHOP filter manifold

  • Cancel Back a step back, in other words, cancel the last action.
  • Run again: Move one step forward, cancel the canceled step.
  • To assist in working with the cancellation / return of actions in the right corner of the window there is a magazine tab, clicking on strings with actions in this tab, you can move or return to several actions forward and back to the initial status of the image.
  • Cut Copy Clear Insert: These actions are understandable to any computer user. If there is a dedicated area on the image, then the actions apply to it.

  • Image Size: Allows you to resize the editable image in pixels in width and height. Moreover, the size may vary both while maintaining the original proportions, and without, it depends on the affected daw on the parameter "Keep proportions".
  • Canvas size: Canvas is an area where you can draw or edit an image. With this feature, it can be increased and reduced. When decreasing, part of the image will be cut off.
  • Points Rotate 180 degrees, Rotate 90 degrees clockwise and Rotate 90 degrees counterclockwise Clear without comment.
  • Reflect by vertical and Reflect horizontally: Mirror reflect image.
  • Cradite: Crimping the image, the field of cropping is set using the mouse.


First deal, what are the layers in Photoshop?
The concept of "layer" in Photoshop has exactly the same physical meaning as in life is a layer or a layer, which is an integral part of something whole.
In Photoshop, as in other graphic editors, it is an extremely useful and indispensable thing, to some extent, the layers are the main working tools in the online photoshop. They allow you to work with each of the elements of the image separately, while not affecting the other parts of the image. They can be represented as a stack of transparent films or cripping, on each of them you can draw and if there is no image on the film, then the layers that lie under it can be seen.


For the convenience of working with layers on the right in the program's working window there are tabs "layers", it is shown in the figure on the right. The active layer in this tab is highlighted in blue. The visibility of the layer is governed by the presence of a tank on the right, to disconnect visibility, you must remove the checkbox. Layers can be dragged up and down with the mouse. Purpose of the buttons at the bottom of the panel, from left to right: change in opacity, turning on the layer mask, add layer styles (external shadow, internal shadow, bevel, external glow, internal glow), new layerDelete an active layer.

In the meantime, let's turn to the menu items.

  • New layer: Creates a new layer.
  • Duplicate Duplicates the active layer and places it over the active layer.
  • Remove the layer: Removes the layer.
  • Open the image as a layer: Opens the image from your computer and displays it in the form of a layer placing over active on this moment layer.
  • Open URL images as a layer and Open from the library as a layer Performs the same actions as the previous item, only the image is taken from a third-party site or online library.
  • Combine layers: Combines an active layer with a layer under it.
  • Combine visible layers Combines the visible layers of the document, in the layers tab, they are marked with a daw.
  • Move the layer up, move the layer down Moves the layer position in the layer tab.
  • Styles of layers Let add the design for the layer, such as:
    • Throw out a shadow
    • Inner shadow
    • External glow
    • Inner glow
  • Rasty layer Converts vector objects, such as text, in a normal image consisting of points.
  • Add layer mask, remove layer mask, apply layer mask Work with masks, similar to layer masks in Photochop.

With the rest of paragraphs Turn the layer ..., Reflex It seems everything is clear.

● Correction

This tool gives us the ability to change the brightness and contrast of the image, its color saturation, tonality, also change each level of the color of the 3-main colors separately.

One more useful feature, which is called Automatic levels Let you make automatic image correction.

The menu includes a number of options with pre-configured and variable parameters. For example, they allow you to make a negative from the photo or apply sepia filter to the image, so that the photo becomes like an old photo in light or dark brown tones.
Interesting option called Cross process. It gives a digital photo view "photo from the 80s", that is, made by the film chamber.

● Filter

IN this menu There is a rich set of all kinds of filters for processing and overlaying them on the image or photo. Moreover, the names of all these filters themselves eloquently tell us about what will be depicted if we apply them.

● View

  • Apply, remove Increase / decrease in the display of the pattern.
  • Actual pixels Display pattern in real size.
  • Show all Display images on the size of the window.
  • Navigator Display / Hiding the navigator tabs located in the upper right corner of the window.
  • Layers, Journal Display / Hiding tabs and Magazinelocated on the right side of the window.
  • Tool options Display / Hiding tabs with tool parameters at the top of the window, under the main menu.
  • Full screen mode Very useful option. Allows you to locate the editor's working window throughout the monitor window.
  • Change the location of the palette The option is still in development.

On the left side of the editor window there is a toolbar.
It is on it that are all the most basic and most common tools to work in online photoshop.
Functions of tools are similar to similar in the usual photoshop.

Let's open a photo of a girl. Let's make a copy of the layer - for this, as well as in other lessons, press the Ctrl + J key combination. It is always necessary to do before any modification of the photo, in order to maintain the main source photo in the original form.

Much depends on the right location of objects in the photo. If objects are located and there - the snapshot cannot be called high-quality. The easiest way to compose objects is to draw a straight line along which the photographs will be arranged.

Today you will learn how to cut and transfer a person from one background to another. This method is easy to learn because it is perfect for beginners studying the basics adobe Programs Photoshop. This function, as a change of background, is one of the most sought-after functions in Photoshop. This procedure You can spend many in different waysusing tools ...

Photoshop transparency is one of the key features of the program. If you are just starting your acquaintance with this program, then this article will allow you to find out how to make transparent background in the Foto.

Portrait - considered the most popular view of the photo. Each novice photographer, sooner or later, has a portrait photo session. In addition to the azov photographing, each self-respecting photographer should be able to process a picture, able to deftly remove the flaws of the face and flaws allowed in the process of photography.

Adobe Photoshop is the world's most popular photo editor in which you can create really interesting things. Today you will learn how to get from the image only his contour. It can be useful, for example, to create a coloring to a child. Simple drawings that do not have complex details are easiest to circle using the pen tool. So it turns out faster and easier. With images, ...

Today you will learn about simple, but at the same time effective method Make a snapshot interesting and unique with texture overlay. You will need: Adobe Photoshop, the original photo and the desire to create.

Unfortunately, not everyone is subject to photographers. Even the most professional photographer cannot prevent the appearance of glare on the face, which manifest themselves due to the outbreak, especially if the shooting occurs in the studio. There are several ways to remove glare in Adobe Photoshop. But today we will consider the easiest and an effective waywhich will make the skin matte and at the same time ...

Any photographer knows that if you open the diaphragm to the maximum, it will be blurred in the picture, thereby highlighting the subject. In some cases, it is impossible to maximize the diaphragm. It most often depends on the background, which is close to the object. However, it can be easily fixed in Photoshop, knowing only the basics of masks and layers.

Do you want to cut an object and put it on another background? Then today you will learn about four methods of selection, each of which is ideal for its type of image. In Adobe Photoshop, developers tried to pay sufficient attention to the allocation tools, even the newcomer can use, while others have more complex settings that will have to be tinked.

Graphic editor - a program that allows you to create and edit photos. With the help of a graphic editor, you can draw, paint, make inscriptions and even get a three-dimensional image of objects.

Adobe Photoshop CS5 - one of recent versions famous graphic editor. The program has a wide range of features, high efficiency and speed. As an example, let's try to learn how to use Photoshop Adobe Photoshop CS5.

Fast navigation on the article

Creating a new project

Getting Started in Adobe Photoshop CS5, first of all, you need to create a new project. This follows:

  • In the drop-down list, select the item "Create";
  • Specify the height and width of the future document;
  • Click on the "Create" button.

Editing an image

If you need to edit any image, then, first of all, it should be opened in Photoshop. For this you need:

  • In the menu located at the top of the program, click "File";
  • In the drop-down list, select Open item;
  • Specify the file and click "Open".

Either press directly on the photo file right-click And choose "Open with ..." -\u003e Adobe Photoshop CS5.

Instruments

On the left side of the screen is the toolbar. To use them, follows:

  • Close to the left mouse button on the appropriate icon on the toolbar;
  • If necessary, change the properties of the selected tool in the panel below the file menu.

Layer management

The layer is the element of the document. To start working with him, you need:

  • Open the "Layers" window (F7 key);
  • Select the desired item by clicking the left mouse button.

Size photo

Changing the size of the photo - one of basic functions Photoshop programs. To do this, you need:

  • In the "Image" menu, select the "Image Size" item;
  • Specify the required value in the "Width" field (the height will change automatically);
  • Press "OK".

Trimming

Pruning photos - Another commonly used pHOTOSHOP Function. To perform it, you need:

  • Select the "Frame" tool;
  • Select the area to be left;
  • Press "ENTER".

Error correction

To correct errors in pHOTOSHOP program There is a special function. To take advantage of it, you need:

  • Press the point "Window";
  • Choose "History".

Preservation of work

After completing the work, it should be saved in the desired format. For this you need:

  • Press "File";
  • Select "Save As" (you can use the "Ctrl + Shift + S" key combination);
  • Specify the path to save the image and need type file (for example.jpg);
  • Press the "Save" button.

Adobe Photoshop CS5 is a multifunctional graphic editor that allows you to solve a number of a wide variety of tasks. The uniqueness of the program is that the same result can be configured in various ways.

Adobe Photoshop CS5 allows you to process ready-made images, for example photo. It is possible not only to adjust the color gamut, brightness and saturation of the image, but also remove individual elements or change their colors, combine several images and even completely change the view of the photo by changing the time of day or making an old fresco time from the photo.

In addition, in Adobe Photoshop CS5, you can draw your images from portraits and landscapes to individual graphic elements Web design.

Adobe Photoshop CS5 is designed to work with raster graphHowever, it supports the necessary minimum functions for working with vector objects, creating images in 3D, as well as animations.

Where to begin

For those who have never come across graphic editors And it is going to seriously work in Adobe Photoshop CS5, it is important to get acquainted with the theory of the nature of color, color palettes and their use, as well as types of images and resolution. After that, you can start exploring the program.

First of all, it should be examined by its interface and decide which functionality should be considered more carefully, pushing out of those tasks that are planned to be performed by Adobe Photoshop CS5.

For photo artists, you need to know the tools of color correction and retouching, they will be the main when working with the program. When creating your image, the color correction is important, as a rule, at the final stage. Learning to adjust the brightness, saturation, the color balance is necessary even if the Adobe Photoshop CS5 user is going to draw exclusively landscapes. Often without it do not achieve the feeling of the integrity of the picture.

If the use of the program is not limited to the color correction of finished images, it is useful to study the basics of work with layers and masks, as well as learn how to use simple tools from the toolbar and their properties.

Also it will be useful to consider the properties of layers and filters. These functions are able to save a lot of time, allowing you to literally in several techniques to create the necessary effects.

In detail to examine the features of Adobe Photoshop CS5, you can on textbooks or video tutorials. but the best optionAs a rule, there will be a personal mentor or paid training courses in the group.

Hello colleagues! Few people do not know about such a program as Photoshop, but few people know how to use it. But indeed, Photoshop is a program that is truly limitless opportunities. It contains a lot of tools, effects, various functions, and this list is hardly ends. Let's wonder what kind of possibilities does the photoshop program contain?

- changing a picture. You can add sharpness, effects, apply color correction and many other features to work with images provide photoshop. If the picture is old, black and white - you can add colors; There are defects in the photo - you can get rid of them using.

Summary:

How to use Photoshop - Main panel

- Layers

In truth, this is a very useful thing in Photoshop. After all, when, creating, one or another work is often used by many images, texts and other things, and if you place them on different layers, you can change the location (change - which on top of others). The layers can also set the effects - stroke, shadow, and so on, and if the images are on different layers, then there will be different effects everywhere.

You can add a certain highlight to the text, with a variety of photoshop styles. You can add unusual strokes, patterns, gradients, shadows - just a couple of clicks.

- maintaining different formats

A variety of supported formats in photoshop just amazes. Whether it is a graphic or 3D format - the program will open, and you can create the project you need. This is one of the important advantages of photoshop.

- PHOTOSHOP filter manifold

Filters sometimes help to make some moments of work in one click. For example, you can take blur. Blur - there is such a tool in the panel, and some use it and make the blur of the entire image. But it is necessary to drive and do, and even customize the intensity and so on - it is necessary. However, the filter could make blur into one moment. there is different types Blur in photoshop, and to taste - you can certainly find.

As an example - filter blur

- Ability to work with GIF files, including their creation, directly in the photoshop program. The thing is troublesome, nevertheless sometimes useful. Many wonder - how to make a GIF with a picture and text, or from some fragment of the video - you can in Photoshop. Of course, to make a GIF - not a minute deal, but adding different effects and other things photoshop - you can make an incredible gIF animationwhich is nowhere to find anywhere.

- "Save for Web ..."

Few people know what it is for what such a service is in Photoshop. And this is not strange at all, because few people are used to keeping images for the Internet in this way. But here you can prepare and save the image just to accommodate on webpage. So you can save the image for the most part without loss of quality in Photoshop. Saving, you can choose the format, the quality indicator of the conservation and much more.

- abundance of photoshop tools

The sidebar with the tools - repeatedly cuts out, and this is the basis of working with photoshop. On this panel you can find different kinds selection (from a standard rectangle to a magic stick), brushes, erase, geometric figures etc.

To be honest, this is the minimum of photoshop features. After all, the program is limitless, and, it means that its capabilities are the same. If you start most of the student photoshop, you can find completely different effects, functions.

What is the abundance of photoshop opportunities? The Photoshop program was created for a long time and periodically updated. Specialists working on updating are trying to improve the program by introducing new elements that also need to be studied. Many specialists, so many ideas.

To learn how to work in the Photoshop program, it is necessary to start superficially to understand what is there. In other words, know working environment - part of the panels.


Panel "Layers". Responsible for the layers of your work. In this panel, they can be created, delete, edit, add to this or that layer effects.

The "Styles" panel is adding collected effects that look harmoniously. In other words, the style is the finished combination of certain effects. And "Correction" - a change in brightness, contrast and all-like.

The "Color" and "Samples" panel - is responsible for ready-made colors, changing shades, brightness.

People who do not know how to use Photoshop, at first glance, it may indeed seem to work in this program very difficult and literally impossible. But it is not. Top toolbar Photoshop, reminds standard, which are in most programs. Soloing them, you can see many familiar, and understandable things.

Something incomprehensible - as a deepening in the study of photoshop. Try - learn that yes, like. And if there is no desire, this fragment may well be unexplored. The basics of using photoshop are explained in the article. What you need, you will always find, because Photoshop reminds others graphic programsHowever, has its own features and additional features.

Photoshop - useful program. Someone is needed at work, someone in study. There are many reasons for the study of photoshop. But such knowledge will not harm. The program is universal, which means that it is often suitable. Now and you know how to use Photoshop, well, if only because the program itself is very interesting.