Windows registry program 10. Registry Life: Russian support and basic set of functions

Regarding the registry of the system, sets many questions: is it necessary to clean? The better? What "cleaner" choose? It is impossible to answer them unambiguously on them, because Microsoft disgraces users in every way to do it. If the Windows 10 registry cleansing is required, then it is worth it very carefully.

How to clean the registry on windows 10?

System settingswhich are contained in the registry can be violated and damaged by one "cleaning". In order not to damage the operation of the system in the present and future, always make backups when optimizing the registry. There were a lot of cases when after removing the "unnecessary and unused" branches, the settings, interface elements, applications, and sometimes the system stopped working. It does not bring the desired optimization, both a significant acceleration of the system and solving errors.

Sometimes, users in the presence of problems with the system are trying to optimize it and clean, leading to more deployed results.

For example, "Updated windows system 10, after which it began to slow down and hob. The user, instead of paying attention to the processes that loaded the device, performed cleaning the Iobit application. After optimization, the computer began to work even worse and after several repeated cleaning stopped being loaded. Return to the recovery point and last version of Windows 10 did not work, as they were "optimized" and deleted. And the problem was in the video driver, which it was necessary to reinstall on an earlier version, as it was incompatible. "

Before any system optimization, you should know a couple of important rules:

• Know what you are doing - do not blindly believe the optimizer applications that make a magical way to speed up the computer without unnecessary problems.
• Be ready for everything - you need to take care of the consequences, create a recovery point or backup to return to the state before cleaning.

Following these simple rules, you can proceed to the most important thing, how to clear the registry on Windows 10; For this there are 2 options:

• Automated - through the "Optimizers" applications (easy);
• Manual - via the editor REGEDIT, manual editing and removal (difficult).

We will analyze in order.

CCleaner

Most optimal option is a program to clean the Windows 10 CCleaner registry. If you perform automated "cleaning", it is better to trust well-known and insane applications. Piriform CCleaner will suit this role better than other applications. Free, functional, reliable and simple application for your needs.

Clearing the Windows 10 registry using CCleaner in Russian

You can download the free version of CCleaner from the official site. After downloading and installing the application, open it and go to the registry point.

By clicking on the "Problem Search" button, scanning for errors and damage will begin.

The CCleaner application performs an analysis according to its algorithm and sometimes it can advise to clear those branches that this moment are used.

After scanning, a list of "problems" will be displayed, wheck them, click "Fix the selected ...".

Before fixing, there will be a request for creating a backup, which you need to create, to prevent further errors that may arise due to "cleaning".

Next, a window will appear with each problem where you can get more detailed information on files and branches in general. Can be corrected specific problems or all right with the button "Fix marked".

After fixing the errors, try scanning again. With a large share of the likelihood, the parameters and values \u200b\u200bthat will need to be deleted will be found.

How to brush the registry in Windows 10 manually?

TO manual cleaning It should be very neat. To clean the registry in Windows 10 manually, you need to know what needs to be cleaned! These may be traces of programs or applications that remain after their removal and sometimes interfere with the correct operation of the system.

To begin with, open the REGEDIT editor, select the Edit tab and click on Find ...

In the search window, enter the desired program or utility to delete, for example, CCleaner:

When searching, you can consider the names of partitions, parameters and parameter values.

Even after removing Ccleaner, traces remained from it, which can be safely deleted, but after making a backup (export file).

For further search by keyword, press the F3 key, this will remove all the necessary parameters without re-entering the search word.

Excellent day!

In case of problems with registry files in Windows 10, this operating system Allows you to recover from the automatically created backup. In the article and consider how to restore the registry in Windows 10, using automatically formed by backup copies of its files and read the way out of the situation with registry problems.

We will also focus in detail on the manual file reservation method. system Base Data without the use of foreign tools.

Resuscitation of the registry from the automatically created copy

A dozen periodically creates a registry snapshots (it is always done before installing updates), which are placed in the System32 \\ Config \\ RegBack directory, placed in the operating system folder, and most of the original registry files are always located at the address "System32 \\ Config" in the same directory. This is Sam, Default, System and others. All of them do not have extensions.

As a rule, for manual recovery, you just need to copy or move the required objects from the "Config \\ Regback" folder to the "Config" directory, that is, the level is higher, with the replacement of original files.

But it is feasible only in cases where the operating system starts and allows you to perform these actions by means of the conductor. There is no such possibility much more often and you have to use the command line tool or the loading flash drive with installation files Windows 10, WinPE or LiveCD.

Consider the case when the "dozen" does not start. To resuscate the registry, in this case, perform the following steps.

1. Run a command line.

If the "dozen" allows you to get to the lock screen, then click on the button restarting the computer by pressing the SHIFT key. After loading the resume environment, click on "Search / Troubleshooting", then click "Advanced Options", where we run the command line.

Otherwise, run the system with boot flash drivecontaining distribution installed windows 10, taking advantage Boot Menu.. On the first screen, clamp SHIFT + F10 to call the command line.

2. Definition of an alphabet system volume.

Inside the running recovery environment, the system volume label may be different from C:, for example, x: because it is a priority definition. To do this, enter the command sequence:

• diskPart - Calling the console utility for working with sections of hard drives;
• list Volume - Display data about all part sections;
• eXIT - closes the application.

Focusing on the label and volume of the system disk, we mark its letter tag.

3. We restore the registry files by replacing the originals on their backups.

This is done by performing a team of the form:

xCopy F: \\ Windows \\ System32 \\ Config \\ Regback F: \\ Windows \\ System32 \\ Configwhere instead f We enter the label of your system partition.

At the end of copying, the registry files will be reanimated and replaced with backup copies stored in the RegBack directory.

4. Close the command line window.

5. Perform windows reboot 10 In order to verify the effectiveness of the operations.

Other registry restoration means

Among the additional options, perform resuscitation of registry files:

• operation of system rollback points;
• execution of the "dozens" reset to the original state without losing user data;
• resuscitation from personally created copies.

Using an integrated registry editor, a copy of the system database is as follows:

1. run the registry editor by running the "Regedit" command in the window that opens with Win + R;
2. click on the computer icon in the left frame and call context menu;
3. we choose to "export";
4. set locations created copy And her name.

Subsequently, it is necessary to execute the created file with the "REG" extension and confirm the changes in the system.

This method of resuscitation is weakly effective, because not all changes are made to the registry, so it is recommended to use points windows restoration 10.

The registry is an important part of any version of Windows. This storage contains all data on the settings of PC components, user profiles, programs and other information. The owner of the device or any malicious file can make changes to the registry, which can lead to a failure in the system or even to its collapse. In this case, it is urgent to make it restoration. About specific active methods Today and talk.

How to create a backup of the Windows 10 registry

You can independently create and save a copy of the registry - separate file. With the extension REG. It will keep all the records that in the registry at the current time. Make a copy recommended before each editing of the registry in the system window. If something goes wrong, you can quickly restore the repository to the original state.

The creation procedure is quite simple and will not take much time:

1. Run a small window "Run" on the display using a combination of two Win and R keys. We write independently or insert a short REGEDIT code. After that, click on OK either to "Enter" (ENTER) on the keyboard. In the "Open" string We print the command Regedit
2. If the combination does not work, open classic app through the panel " Windows search"(Icon in the form of a magnifying glass on the" taskbar "to the right of the" Start "button).
   In "Searching Windows", enter a request to "execute"
3. We allow the editor to make changes to your PC - click on "yes."
   In a small window, click on "yes" to allow the editor to make changes on the device
4. Immediately pay attention to the top panel of the window - we need a menu with the "File" heading. Reveal it with one click mouse. In the list we make a choice in favor of the Export item.
   In the "File" menu by clicking on Export Options
5. In the new window, we give the name of the backup, are determined with the future location of the file (be sure to remember it to not search for a long time). At the bottom of the window, select either "the entire registry", or some one particular branch. In the second option, you will need to specify which section to put in a backup. After that, click on "Save".
   Name the backup file and select the folder in which it will be stored
6. Go to the folder where the file should be saved. Check it.

How to roll back the registry to the previous version using a backup

You can recover all storage records in several ways. There is something simple methodsand more complex, for example, a way to use the "command line".

Using the "Import" option

One of the classical ways to replace the current damaged registry entries on those that were before making changes is the "Import" function available in the editor window itself:

1. Open our "registry editor" with the "Run" window or the Windows Search panel. You will find instructions on the launch in the previous section of this article.
2. Again, click on the first item "File", but this time I choose the "Import" option in the list.
   Click on "Import" in the "File" menu
3. In the "Windows Explorer" we find a folder in which a copy was saved, and then the file itself with the REG extension. Click on it once the left mouse button to highlight it, and click on "open".
   Find a backup file in the "Explore" and click on Open
4. Now it remains to wait when the system will change the current registry entries on the parameters from the file.
   Wait until the system replaces all files.
5. Restart the device to complete the final recovery process.

Video: how to create a backup and make a rollback with it

Through the backup file itself

This is the easiest and fast way Return the previous state to the registry. Make the following:

Through the "Merge" option

The method is also very simple and similar to the previous one. It differs only in the way it is to start the recovery process:

Simple copying files

The developers of the "Operations" prudently placed in system folders backup files Registry. They are always relevant - updated together in the OS. With the help of them, you can make the registry rollback to the previous version. Files are in the folder with the System32 \\ Config \\ Regback directory. There are five of all five: everyone is responsible for a separate branch in the repository.

The registry entries that the system uses are currently located in the Config folder, that is, in the section level above. To return the previous version of the registry, you just need to copy files from RegBack in config:

1. Open " Windows Explorer"And launch in it system local disk. As a rule, it goes by the letter C. If the system is installed on your other disk, open it.
   Open the "Explorer" and run in it a local disk with system files
2. Now go to the next directory: Windows - System32 - Config.
   In the Config folder open RegBack
3. In the last folder, locate the REGBACK unit. Run it double-click. Highlight all files with the mouse and click on them right key. In the list on a gray background, select "Copy" or press the Ctrl + C keys simultaneously.
   Copy all files from the REGBACK folder using the context menu
4. Return to the Config folder. On the field free from the points, click again with the right key and select the "Paste" option or clamp the Ctrl + V keys.
   Click on the option "Paste" in the context menu of the Config folder
5. You can also open these two folders in different windows, and then highlight and drag files using a mouse.
   Drag files from RegBack in Config

The necessary files will move from RegBack in Config with the replacement of originals.

Using the "Command Line"

It is not always possible to perform a simple copy of the file. "Explorer" may not allow it to do if any entries from these files will be used by the system. In addition, as a result of improper editing of the registry, the computer can simply stop working. Thus, you will not even have access to the "desktop" and "conductor". What is in this case to do? Use the Team String Console to solve the problem:

1. If you can hit the lock screen, press the power button in the lower right corner, and then holding the SHIFT, click on the "Restart". The recovery environment will be loaded, select "Find and Troubleshooting" - "Advanced Settings" - "Command Line".
   In the "Advanced Settings" menu, click on the "Command Line"
2. If the lock screen is not available or you do not know the password account (which will have to enter in the first version), then boot from the boot windows flash drives 10 (or from disk).
3. On the first installation screen with the "Install" and "System Recovery" buttons, press SHIFT + F10 (or SHIFT + FN + F10 (or SHIFT + FN + F10 on some laptops), "Command Line" will open.
   Hold the combination of SHIFT + F10 in the initial window with the "Set" button to go to "Command Line"
4. In the recovery environment (and "command line" when windows installation 10) The letter of the system disk may differ from C. To find out which the letter of the disk is assigned to the system partition, enter the DiskPart command, then List Volume, and Exit (in the results of the second command, check for yourself what letter has system section). Next, to restore the registry, use the following command: Xcopy C: \\ Windows \\ System32 \\ Config \\ RegBack C: \\ Windows \\ System32 \\ Config. After that, confirm the file replacement by typing Latin A.
   In the "Command Line" insert XCopy C: \\ Windows \\ System32 \\ Config \\ Regback C: \\ Windows \\ System32 \\ Config
5. Upon completion of the execution of the command, all registry files will be replaced with your backups: you can close the "command line" and restart the computer to check whether Windows 10 has been restored.

Video: How to restore the registry through the "Command Line"

Utilities for correcting errors and registry restoration

Solve the problem of incorrect records in the registry can not only with the help of standard recovery through a backup, but also with the help of special utilities that are designed to "repair" this important system base.

REGISTRY REPAIR: simple and free, but in English

Registry Repair is a useful and easy-to-use product from GlarySoft, designed to correct errors in the registry and restore it if necessary. They can be used as free tool For preventive service system storage. The utility will also help urgently solve the situation with the unstable work of the "Operations", if it is caused by the incorrect state of the registry.

In Registry Repair you can fix the registry errors to optimize your OS

The utility is capable of the following:

1. Detect up to 18 types of errors in the registry repository, incorrect parameter values.
2. Check the structure of all branches.
3. Apply the "smart" algorithm during the search for incorrect, damaged and unnecessary records.
4. Create a backup before each edition.
5. Restore records from this copy in case of unsuccessful editing.
6. Fix automatically all marked recording checkmarks or provide the right to the user to do it selectively.
7. Open entries in the registry editor.
8. Cancel all the changes made if there are failures after editing.
9. Create exception lists that utility will be ignored while searching for errors.

The application finds such errors:

• incorrect paths and types of files;
• incorrect user controls;
• outdated records;
• incorrect fonts;
• outdated elements of the "Start" menu;
• unused file extensions;
• program start errors and so on.

The program is suitable for almost everyone versions of Windows: Starting from XP and ending with the "dozen". Among the minuses can be distinguished the lack of Russian and portable versions.

The application is available for download on the official resource of the developer.

Registry Life: Support for Russian language and basic set of functions

Registry Life - Free and Fast Registry Optimization from the CHEMTABLE developer, a company that specializes in creating applications to remove software and clean the registry.

Registry Life has a set of functions sufficient to solve most registry problems

Registry Life has the following features and features:

1. Removes unnecessary more records in the registry, which remained inherited from utilities for a long time removed from the PC.
2. Conducts a registry defragment that all records are collected in the same area on the hard disk - the system will be easier to search for them. This increases the speed of work in the "Operation".
3. Squeezes the registry, thus reducing the size of the storage files.
4. Looking for damaged records and corrects them.
5. Analyzes all branches and indicates the incorrect values \u200b\u200bof the parameters that slow down the PC operation.
6. Able to perform optimization in automatic mode After downloading "Operations". It will relieve the user from the preventive maintenance work.

Applications have a minus - a basic set of functions for the "repair" registry without additional "chips". Nevertheless, it will be enough to determine and eliminate the errors in the repository.

Using the utility can be used as follows:

1. OS: Microsoft Windows. XP, Vista, 8, 8.1 and 10 (32- and 64-bit).
2. RAM: from 256 MB.
3. Hard disk: 50 MB of free space.
4. Administrator rights.

The utility installer is better downloaded from the official resource of the developer. The file weighs just over 35 MB.

Wise Registry Cleaner: Product with additional features

Wise Registry Cleaner - free utility With a large set of tools that can improve the technical status of the system storage.

Wise Registry Cleaner can work in portable mode, that is, not leaving traces in the system

The following features:

1. Optimizes the registry structure.
2. It has a portable version (the operation of this version does not bind to OS).
3. Increases the performance of the "Operations" due to its fine tuning.
4. Creates a full backup of the registry before correcting errors.
5. It allows you to choose the user, what errors to correct, and which is not.
6. Defragmentes and compresses the storage.
7. Allows you to cancel the changes made only two clicks.
8. It divides errors for dangerous and safe, that is, those that can be removed painless for the registry.
9. Provides a description for each error and gives recommendations, how to do with it.
10. Saves remote information to a separate file with the REG extension.
11. Works in automatic mode.

To the computer, this registry software makes such requirements:

1. RAM 128 MB or more.
2. Free space on a hard disk from 9 MB.

Minus utilities are that some antiviruses, such as MalwareBytes and AVG, sometimes recognize it as unwanted. The application has a paid version with a more advanced functionality. It can be purchased for $ 30. Load the utility only from the official site. The installer of the free option weighs only 2.72 MB.

Video: How to use Wise Registry Cleaner

Auslogics Registry Cleaner: Free and Effective

AUSLOGICS Registry Cleaner is a free, but effective software to solve registry problems. Its manufacturer is Auslogics Labs. The application is suitable for regular maintenance of the registry and its emergency repair.

AusLogics Registry Cleaner has a very simple interface with which even a beginner will be sacrificed

Applications include the following advantages:

1. High scan speed.
2. Work on unique algorithms.
3. A simple interface in which even a beginner user will be sought. All major actions are performed in just a few clicks.
4. The ability to specify before checking the types of errors that can meet in the system storage facility.
5. Automatic correction of errors found.
6. Efficiency. The device begins to function faster by 20 - 30%. The program corrects most error types and deletes unnecessary records, such as non-existent links and file directories.
7. Full report after fixing errors.
8. Storage copies of old registry entries. If necessary, each user can return everything to the place.
9. Support for Russian language.

Are there any disadvantages of this utility? Like all other applications, of course, there are:

1. Lack of portable version of the utility.
2. Closed source code.
3. The malicious program according to some antiviruses (although it actually does not constitute any threat). Anti-virus software can block the operation of the program.
4. Availability of advertising.

The program places the following minimum requirements to the device:

1. Processor S. clock frequency 800 MHz or more powerful.
2. RAM 256 MB or more.
3. Free space on a hard disk from 39 MB.
4. Architecture with a bit of 32 bits or 64 bits (x86 or x64).
5. Windows XP operating system, Windows Vista, Windows 7, Windows 8, Windows 10.

The utility is available for downloading on its official resource.

Backups Files are stored in a reliable place - on system disk. They are saved automatically by the system. You can use them, for example, if because of the failure in the registry, you cannot get to the "desktop" when Windows is simply not loaded. Take advantage of this case Command line"To copy backup files in the desired folder. You can also create your copy - a separate file. It is very convenient to use it: it is enough just to open it with a double click to start recovering the registry if the computer started to work slowly or make failures after its unsuccessful editing.

On Windows 10, the input to the registry is performed through the Follow Tool (Win + R). You should enter the REGEDIT command. Initially, Microsoft stated that the registry optimization is not required, you need to do everything from other snaps. Nevertheless, since the time of XP, various utilities were used for the same goals. Sometimes edit was required to those who closely communicated with Pirate software. In order to deceive the system. Since then, the position of the company has not changed: the Windows 10 registry cleansing (manually, the more) is not required.

Let's say more: after applying some utilities from the desktop, created there, apparently, not according to the rules of labels. Sometimes after some time the system itself falls. On one side, the pros is recommended to create a copy, on the other there are as many as two unpleasant moments. First, it is long, and the file size is large, secondly, not all the keys can be so easy to rewrite. OS refuses in very many cases. To readers are even clearer: Registry, this is the settings database, without it wINDOVS system Work is unable. That is why it is necessary to clean it as much as possible with handles or even with the best specialized twigs.

Third-party

There are at least two kinds of utilities that are used to use for the purposes mentioned.

1. CCleaner was originally designed to clean the disk. But then somehow it happened that the options became more and more, until finally, did not work closely and the registry too.
2. Family of IOBIT. The authors were seen by their own eyes how some funds for the protection of PC were called the imitation of useful actions. So this or not, I do not take it, but the funds of this company have since do not use since then.

Other tweaks are not so well known, and it is impossible to say that without cleaning the registry of Windows 10 you can not live. Rather, on the contrary, the less you touch the database, the easier it is to work on a PC.

CCleaner

Today it can perform functions very extensive:

• Restoring files.
• Monitoring processes.
• Information about the equipment set of PC.

These are just a few examples. But all the advanced options need to be paid, and most of the population is not so all this is necessary to spend pounds sterling. We offer to look at the interface free version. As you can see, she knows how to work with the registry.

Please note that "full cleaning", according to the company's assurances, only paid versions are performed. Let's see what this utility can get rid of.

Here is the approximate line of the contents of the bookmark:

• Missing general libraries (DLL). All the keys referred to the modules disappeared from PCs.
• Unused file extensions.
• ActiveX classes and other classes.
• Types of libraries.
• Applications.
• Fonts.
• Application folders.
• Aid files.
• Installers.
• Outdated by.
• Strits of autoload.
• Saved Start Menu Data.
• Cache MUI.
• System events.
• Services

Honestly, on some points I would like to see the decoding. We are confident that the program will not be able to qualitatively clean the autoloading unit or delete those services that we do not like (because it does not know our preferences). You can learn a little more by pressing the SCAN button ... A list of problems will appear, and it will be possible to make a more detailed view of the utility capabilities. Here is an example for file extensions.

Indeed, the list contains some trash. It is difficult to say exactly how exactly these extensions are prescribed to the registry. Of the work features, the utility can be noted the possibility of creating a copy.

How to use it and where to find? Select the name and location of the file. If necessary, roll back all the changes made.

You can do this, for example, clicking twice on the copy file.

Iobit.

With the CCleaner, much is clear what Iobit concerns, then on the official website of the company it is written that this is a utility No. 1 from 150 million users. We can not bypass the side of such a powerful tool.

Please note that a dozen is already included in the list of supported systems. Rather, set this tool and check it in the case. We consider unnecessary to describe the process of registration of the application in the system, proceed immediately to the consideration of the possibilities.

We would not call the interface chic for one reason. In comparison with CCleaner there is an increase in complexity graphic interface. But usually cleaning starts on a PC, which already works slowly. All this will make the user wait, spending the precious seconds of your life.

In this case, nothing was found. But it is very difficult to understand what to do next. It turns out, depending on some prerequisites, the search algorithm changes. There was nothing more than anything, and during the restart there were 222 errors. Well, thank the creators for such generosity and proceed to correction.

After clicking, the errors have not become again.

Manual cleaning

We have already described above how access to the editor. Repeat:

1. Win + R.
2. regedit.
3. ENTER.

Usually focus on some keywords. For example, we did not remove the Driver Booster, these combinations should be sought. For this, there are special options (see the Edit Menu).

Ctrl + F is pressed when first searching for entering. And then it's just pressing F3. And so the entire registry is. This process can be unprecedented. Moreover, if you definitely do not know what exactly you need to look. That is why few people take to clear the Windows 10 registry manually. But the most important thing is why?

How to delete or create a parameter

In the Editor, the right click on the desired line opens the context menu, the contents of which itself speaks for itself. If you need to create parameters, or delete them.

Before you clean the registry, make copies of sections. To do this, click the right mouse button on any folder and press export. All embedded branch will be written to the file.

The Windows registry is a database (repository) built according to the hierarchical principle (storage), where information on OS settings is collected and the routes of applications installed in it are prescribed.

However, it is impossible to name this storage, and it is connected with the fact that many of the programs installed are unable to delete their records from the registry after uninstalling from the OS, which increases the amount of information in the registry, slowing the operation of the OS and demanding the registry work.

According to Microsoft, Windows 10 is one of the most independent of the third-party software Systems. However, in practice, this OS does not always cope with the cleaning of the registry, which causes the need to use special software.

CCleaner 5.13.

According to specialists and users of PC CCleaner, it is rightfully among the leaders of the programs - registry cleaners. In version 5.13, CCleaner has improved the registry cleaner in Windows 10 and optimized work with 64-bit OS.

Step 2. Press the "Try free" button.

Step 3. Click on the downloaded installation file.

Step 4. Click on the Install option.

Step 5. Click on "Test". The program will be installed and started on the PC.

Step 6. Click on the left at the "Registry" paragraph and click the "Problem Search" button. After issuing the Fault List Program, click the "Fix Selected" button.

Step 7. At the request of the program to save a copy of the registry (so that in the event of problems, it was possible to return to the state before the start of the corrections), click "Yes."

Step 8. Select a place where the file will be saved, specify its name, and click "Save".

Step 9. A message appears on the errors found, click "Fix marked".

Step 10. After cleaning the registry, click "close" and exit the program by clicking on the cross on the right above.

Reference!CCleaner has a simple interface and a large set of tools that allows you to carry out all types of Windows cleaning.

Auslogic Registry Cleaner

According to the results of independent testing, this cleaner - best app Cleaning the registry in Windows 10, which allows its professional cleaning.

Step 2.

Step 3. Put a tick on "Selecting Installation", and remove a tick with "Install Boot Speed \u200b\u200b...", if there is no need for this utility. Click "Install".

Step 4. After installing the program, click "Complete".

Step 5. In the program window, the directories in which the program conducts a search is marked, and on the right are all actions related to the cleaning of the registry. Click "Scan".

Scanning of all registry areas takes up to 10 minutes.

Step 6. After scanning, the program will display a list of faults indicating their importance in the system. Press the "Fix" button at the bottom of the screen, saving the checkbox to "archive changes" (so that in case of problems you can return to the state before the start of the fix).

Step 7. After correcting errors, the system will issue a statement report. Exit the program by clicking on the cross on the right above.

Reference!In addition to the automatic correction mode, the Auslogic Registry Cleaner provides a system for filtering data to expand files, old software records, labels, etc.

Advanced System Care.

Despite the fact that this application does not apply to narrow-controlled registry cleaners, it includes special components of finding problems, being, according to experts, an intermediate option between CCleaner and Auslogic Registry Cleaner.

Step 2.

Step 3. Click on the downloaded installation file.

Step 4. Click on the Install button.

Step 5. Take a tick "No, thanks", and click "Next."

Step 6. After installation, the program will start automatically. Press "No, thanks" on the offer on the mailing list.

Step 7. The program window opens. In its lower part, the checkboxes are allocated areas with which the program works, and the Start button is located in the window. Make sure the check mark "Clearing Registry" is installed, and click "Start" to start cleaning and optimizing the system.

Step 8. After a few minutes, the system will present a report on the problems found indicating the number of errors associated with the registry. Click "Fix".

Step 9. After a few minutes, the system will present a report on the repair of the system with an indication of the number of eliminated registry errors. Exit the program by clicking on the cross on the right above.

Reference!ADVANCED SYSTEM CARE is a bright representative of complex optimizers using antiviral mode and making corrections to the OS security system.

iobit Uninstaller

The advanced Iobit Uninstaller uninstaller is more effective than Windows 10 when cleaning the system using an in-depth search algorithm that remains from the data programs after their removal.

Step 2. Click on the "FREE DOWNLOAD" button.

Step 3. Click on the downloaded installation file.

Step 4. Click on the "Install" button.

Step 5. After installation, the program window will start. Highlight the program that you want to delete, and press the "Delete" button at the bottom of the window.

Step 6. In the next window, the program will propose to create a recovery point. Skip this stage by clicking the Delete button.

Step 7. After carrying out standard removal Programs The system will propose to scan the remaining folders and files left after it is deleted, as well as keys in the registry sections. Press "powerful scanning".

Step 8. After scanning the system will give a list of the remaining parts of the program. Click "Delete".

Step 9. A message appears to successfully remove residual files. Exit the program by clicking on the cross on the right above.

Reference!In addition to the standard, the uninstaller has special system Forced removal of non-removable programs using ordinary windows Components.

Manual Cleaning Registry in Windows 10

Automatic registry cleaner with specialized programs is performed on the set of rules embedded in these programs. Such cleaning is conveniently carried out with a massive correction of registry entries. However, sometimes a set of rules may not work, and then it is required to clean it.

Step 1. Press the "Win + R" keys on the keyboard ("Win" is to the right of the "Ctrl") to start the "Run" menu.

Step 2. Print in it "Regedit" and click "OK".

The registry editor opens. On the left in the window there is a tree of registry sections, and on the right of their own values.

Important!Before performing manipulations with the registry, it is extremely desirable to exist exporting existing records in it to a special file so that in case of failure in OS to initial state From this copy.

For this you need:

Step 3. Click on the "\u003e" icon on the left of the HKEY_CURRENT_USER folder (you can double-click on the folder itself), open it.

Step 4. Unlock the "Software" section, clicking on the "\u003e" icon.

Step 5. Find the name necessary program or the name of its publisher.

Step 6. Open the program folders to the required double click of the left mouse button, then highlight it with a mouse click.

Step 7. Press the "DEL" key, deleting the record.

Step 8. Press "Ctrl + F" to call a search menu. Dial the word in the string to detect the program by its name in the registry. Click "Find Next".

Step 9. Click on the entry (right) on the record found, and the left click on "delete". Another removal option - after selecting the desired value, press the "DEL" keyboard button.

Step 10. Click on the "F3" keyboard, finding another entry specified in the search. Delete the value and repeat the algorithm until all data related to the program will be deleted.

Remove programs from automatic download

Many applications are recorded in the registry information allowing them to automatically boot or carry out updates when loading OS. If this cannot be turned off in the product itself, it is possible to remove these records from the registry.

Step 1. Disclose the partition structure, sequentially by the mouse (left click) by its arrows to: "HKEY_LOCAL_MACHINE" - "Software" - "Microsoft" - "Windows" - "CurrentVersion" - "Run".

Step 2. On the right there will be software labels that run by the OS during loading. Select the desired label to highlight the mouse and erase it with the "DEL" key.

Reference!If there is no data on the communication of shortcuts with programs, you can search for their name through Google, or use the Special Site: http://www.processlibrary.com/en/.

To obtain the necessary information to type the name of the shortcut in the search bar and click "Search".

Step 3. Disclose the partition structure, sequentially by the mouse (left button) by its branches before: "HKEY_CURRENT_USER" - "Software" - "Microsoft" - "Windows" - "CurrentVersion" - "Run".

Step 4. Erase the labels, as is preparing above.

Reference!By receiving in general access, recorded in "Local_Machine", and so on - in "Current_user".

Step 5.. After cleaning, close the editor by clicking "File" ("File") - "Exit" ("Exit").

Registry recovery order

If, as a result, the OS failures appeared with the registry, it will take a copy of its copy, overwriting the lost data from it.

Step 1. Run the registry editing program (see Step 1 to "Manual Cleaning ...").

Step 2. Click "File" - "Import".

Step 3. In the "Import ..." window, mark the mouse click required file. And click "Open".

Step 4. Reply "Yes" to prevent the system. The data will be listed in the registry, returning the operability of the OS.

Windows 10 programs that are worth removing

For the Windows platform, there are many programs, however, there are often unnecessary or outdated applications that can be deleted:

Removing unnecessary Windows programs

One of the obsessive programs, independently installed on the PC, is the amigo browser. Its deletion can be carried out by standard OS tools.

Step 1 . Click on the "Start" button with the right mouse click. In the open menu, click the left click of the "Programs and Components" mouse.

The Delete ... "window opens, which includes a list of applications installed on PC. The photo below shows all the "harmful" components related to the Amigo browser.

Step 2. Click the mouse on the "Amigo" and click "Delete". Do this operation with all listed components. Close the window to remove the program with a cross on the right above.

Step 3. On the desktop, double click on the "Computer" icon.

A list of OS discs opens.

Step 4. Disclosure C: Double left click, sequentially clicking in folders to: "C:" - "Users" - "Your Name", as the user is registered in "OS" "AppData" - "Roaming" - "Microsoft" - " Internet Explorer "- Quick Launch.

Step 5. Erase the Amigo label in the Quick Launch folder, highlighting it with the left click of the mouse and clicking on the "DEL" keyboard.

Step 6. By the same method, disclose the "Local" and "Roaming" folders, which are at the following addresses:

Erase all the folders in them with the mention in their names Amigo (Amigo) and Mail (Mail), highlighting them with the mouse and pressing the "Del" on the keyboard.

Step 8. Open the Temp\u003e folder located at: "C:" - "Users" - "Your Name" - "AppData" - "Local" - "Temp".

Step 9. After opening the folder, click on the "Ctrl + A" keyboard, highlighting all files. Click on the allocated mouse with the right clicks and click the left-click on the "Delete" option.

After cleaning the listed folders, the amigo browser will be completely removed from the operating system.

You can also use the Iobit Uninstaller uninstaller uninstaller uninstaller uninstaller uninstaller.

Video on the topic voiced in the article.

Video - How to Clear Registry in Windows 10