Log in to the personal account for ASUS router. Log in to the ASUS routers settings. How to enter the ASUS router if you forgot the password

The entry procedure in ASUS's routers does not have special differences from other router manufacturers and routers. Nevertheless, many users have problems with this, because it is often required to enter your router settings to, for example,

In this article we will tell you how to go to the ASUS router and what to do if I forgot the password from it.

Where to begin?

As soon as this condition is performed, open any browser and try to enter the following IP addresses alternately and press "Enter":

• 192.168.1.1
• 192.168.0.1

Input in the address bar of the browser IP address of the router

Enter login and password from the router (default Admin, Admin)

Here I enter the default login and password values \u200b\u200b- admin.

If you changed default values, then enter them.

As soon as the correct combination of authorization data is entered, you will fall into the settings. router asus.

ASUS router settings view

What if the login and password from the router does not appear?

In this case, the fact that the address space was changed in the settings. In this case, you can familiarize yourself with, in which we told how to find the IP address of the router.

You can also simply reset the router on the factory settings by long pressing the RESET button on the back of the router.

RESET RETTER button RESET

In this case, all settings will be reset to the factory and IP address of the router can be viewed on the bottom sticker.

Factory login password and ip address of the ASUS router on the bottom sticker

How to enter the ASUS router if you forgot your password?

In this case, as in the previous one, only a reset to the factory settings will help you. After that, the password and the IP address will become standard, that is, those that are written on the sticker at the bottom of the router.

It is worth considering that if you reset the ASUS router to the factory settings, then you will most likely stop working the Internet and Wi-Fi. In this case, it will have to configure again.

In this step by step instructions Let us consider in detail how to configure the Wi-Fi ROTER ASUS RT-N10 in its various options:

• RT-N10P.
• RT-N10 + D1
• RT-N10E B1
• RT-N10 B1
• RT-N10 C1
• RT-N10U B

And other modifications of the popular and cheap this wireless aSUS router. Basic wi-Fi Setup The ASUS RT-N10 router, regardless of its modification, is no different. That is, if you need to configure the router in such a way that he distribute wired Internet on the wireless devices - know about which of these wi-Fi options The router ASUS RT-N10 you do not need. The only possible complexity is the new firmware 3.0.0.x on some models (black background) or 7.0.2.31 on other options (though, with this firmware, the routers do not fall into sale), but in fact, this is not difficulty - all actions, Required for successful settings are completely identical. Nevertheless, we will turn on here the screenshots of this firmware.

• Preparation for configuration, connection Wi-Fi Router ASUS RT-N10
• How to go to the ASUS RT-N10 settings
• Setting up L2TP connection Beeline on firmware 2.0.x, 7.0.0.x (plus Television setting Beeline)
• PPPOE Setup Rostelecom and Dom.ru on ASUS RT-N10 with firmware 2.0.x (plus setting IPTV Rostelecom)
• Setting wireless networkinstalling a password on Wi-Fi to ASUS
• Setting the ASUS RT-N10 with a new firmware
• ASUS RT-N10 Firmware

For novice users who have never set up routers, notice: there is nothing complicated in this, the whole process will take no more than 15 minutes.

Preparation for the tincture and connection of the router ASUS RT-N10

Before you configure a Wi-Fi router, you should connect it correctly, and as experience shows, even with this there are problems. And, in addition, pay attention to some network settingswhich may be critical for successful configuration.

First of all, it is recommended to check the connection settings for local networkused to configure ASUS RT-N10. In particular, the TCP / IP protocol parameters must be set to "receive an IP address automatically". About how to do it in detail is written (opens in a new tab).

The next moment to remember: If your provider uses PPPOE, L2TP, PPTP and others connections, that is, in order to enter the Internet, you will run any connection to Beeline, Rostelecom, Dom.Ru from the desktop or from the list of connections in the taskbar, burst this connection. And do not connect again during the router setting, none after the wireless router is already configured. Those. This connection will later install the ASUS RT-N10 itself, you do not need to run anything, otherwise you will receive a result in which the Internet will be available only on the computer, but not by Wi-Fi.

And now about the connection of ASUS RT-N10. On the back side The router is present five network connectors. One of them stands out among the others - to it and connect the cable of your Internet provider. And one of the remaining ports connect with the corresponding port of your computer network card, then turn on the power of the router. You can start setting up.

How to go to the settings of the router ASUS RT-N10

Go to the router settings

In order to go to the ASUS router settings, run the browser (it is already running if you read it, so better open new tab) And enter the address 192.168.1.1 in the address bar, after which you should see the user name and password. Standard login and password for routers of this manufacturer - Admin and Admin, here and there. You may be asked to change the standard login data, do it. After that you will find yourself on main page Asus RT-N10 settings, which looks like this:

On this page, all the operations for configuring connections are done, the password is installed on Wi-Fi and other actions that we now work.

Setting up ASUS RT-N10 for Beeline

In order to configure the ASUS router for Beeline, on the main page of the router settings, click on the menu on the left "WAN", after which fill the L2TP Internet connection options that look like this:

Configuring Beeline Connection on ASUS RT-N10 (Beeline L2TP)

The main parameters to be installed:

• WAN connection type: L2TP
• IPTV port selection - If you are using Beeline Television, select the port to which you connect the TV console Beeline.
• Receive an ip address automatically - yes
• Connect to DNS automatically - yes
• Username, Password - Your data for Internet access from Beeline Provider
• PPTP / L2TP server (VPN) - tp.internet.beeline.ru
• Apply settings. On some firmware ASUS Settings Do not persist if you do not enter anything in the "Host Name" field. Enter Beeline.

If there were no errors, it was not allowed, and the connection of the Beeline on the computer is broken, after a short time, the connection to the Internet will be installed and the case will remain as small - configure the parameters wireless connection. Make sure that the Internet works by opening a new tab and trying to go to some site. For the configuration of Wi-Fi on ASUS, see further, after the information about setting up the router for Rostelecom and Dom.ru.

Setting up ASUS RT-N10 Rostelecom and Dom.ru

In order to configure the Wi-Fi router ASUS RT-N10 to work with the Rostelecom providers and Dom.ru, which use PPPoE to access the Internet, follow these steps:

• On the left menu, select "WAN"
• Install the necessary connection settings, which are key to connectivity (PPPoE), automatic receipt of the IP address and DNS (you need to set "Yes"), your login and password Rostelecom or Dom.ru. The remaining parameters can be not changed. If the settings are not saved without entering anything in the Host Name field, enter ROSTELECOM or DOMRU. Also, if you need to configure IPTV Rostelecom, specify the port to which you will connect the TV console.

Save the settings and wait a short time. The router will have to connect to the Internet and, if you try to go to any page, it will open, despite the fact that the connection of Rostelecom or Dom.ru is disabled on the computer itself. Now it is desirable to configure the wireless Wi-Fi network settings.

Setting up a wireless network and how to put a password on Wi-Fi ASUS

Another of the main tasks when setting up a Wi-Fi router is to configure the parameters of a wireless network, which is needed in order to, first, foreign people could not connect to it, and secondly - to use it more easily. Wi-Fi configuration does not depend on what kind of provider you have - Beeline, Rostelecom or any other.

In order to configure the basic parameters of the wireless network and put a Wi-Fi password in the settings menu on the left, press "Wireless Network" and on the General tab, enter the following parameters:

• SSID (Wireless Name Name) - Enter something your own here, so you will distinguish your network from others. It is better to use a latin, otherwise there are problems with Wi-Fi connected.
• Authentication Method - WPA2-Personal
• The WPA preview key is your Wi-Fi password, which should contain at least 8 characters.
• The remaining parameters can not change, especially if you do not know what they mean.

Apply settings. Wait for the Wi-Fi settings have been successfully changed. And, in fact, everything - you can try to connect via Wi-Fi from a laptop, phone or tablet, everything should work.

Setting up ASUS RT-N10 router with new firmware

Frankly, I do not know whether there are Wi-Fi router with this type of firmware for sale (in my opinion, yes, for example ASUS RT-N10P and RT-N10U), but it can be downloaded and installed on some RT-N10 router models . The firmware has an index 3.0.0.x and the web interface of the router with this firmware version looks like this:

As you can see, despite the fact that the style of the design has changed, the location of the setup menu items remains unchanged, if compared with firmware 2.0.0.x and 7.0.0.x. Therefore, basic setting Wi-Fi ASUS router with a new firmware occurs in the same way as described above for Beeline, Rostelecom and Dom.ru.

ASUS RT-N10 Firmware

If you want to flash the ASUS RT-N10 router, then there are no special difficulties in this. First of all, you will need to download the firmware from the official site. Given that the modifications of this router exists a sufficiently large number, it is important not to be mistaken. To do this, go to the router settings panel and select "Administrative" in the menu on the left, after which you open the "Firmware Update" tab.

Pay attention to two items: the identifier of the product and the firmware version - this information informs you about what kind of ASUS RT-N10 you have, as well as what firmware is currently installed at the moment.

At the top of the page there is a link to the page with firmware, but you should not pass through it - by experience, it does not always lead to the correct model of the router. Therefore, the best optionTo download the firmware for the ASUS router will go to the site http://www.asus.com/ru/, choose products - network equipment - wireless routers, then go to the page of your router model, click the Support link, and then - "Download". In a group " Software»You will find all the firmware you can download and install on the router. Load the desired firmware version, unpack the zip file with the firmware and return to the firmware update page of your router.

Click "Select a new firmware file", and then - "Send". Wait until the firmware of the ASUS router is completed, it will take about three minutes, during which communication with the router can be interrupted. At the end, you will see that the firmware version on your router has been updated.

I hope this instruction You helped you. If not difficult - share it in social networks Using the buttons below.

The instruction is written by Olympuser.

For the primary setting you need to connect the Ethernet cable running network card Computer and to one of the LAN ports of the router. The cable coming from the provider must be connected to the WAN port.

1. Setting up a network card

Windows XP.

In the control panel, switch to classical mind, then go to "Network Connections".

A window will open with the connection properties. Highlight the "Internet Protocol (TCP / IP)" item and click the Properties button.

• IP address
• Subnet mask: 255.255.255.0;
• Main gate: 192.168.1.1;
• Preferred DNS server: 10.0.0.1;
• Alternative DNS server: 10.0.0.2.

Then click OK → close.

Network card set up.

Windows Vista.

Click the Start button, select "Control Panel".

In the control panel, switch to classical mind, then go to the "Network Management Center and common access».

In the Network Management Center and General Access, select "Network Connections" item.

On the "Local Network Connection" icon right-click Mouse and in the menu that appears, select "Properties".

In the properties of the Internet protocol, put a point in front of the "Use the following IP address" item and enter the following parameters:

• IP address You can choose any of the range 192.168.1.2-192.168.1.254. For example, 192.168.1.100;
• Subnet mask: 255.255.255.0;
• Main gate: 192.168.1.1;
• Preferred DNS server: 10.0.0.1;
• Alternative DNS server: 10.0.0.2.

Then click OK → close.

Network card set up.

Windows 7.

Click the Start button, select "Control Panel".

On the Control Panel in the View menu, select "Close-up icons" menu, then go to "Network and Shared Access Center".

In the Network Management and Shared Access Center, select "Change Adapter Settings".

On the "Connection On Local Network" icon, right-click and select "Properties" in the menu that appears.

A window will open with the connection properties. Select the item "Internet version 4 (TCP / IPv4)" item and press the "Properties" button.

In the properties of the Internet protocol, put a point in front of the "Use the following IP address" item and enter the following parameters:

• IP address You can choose any of the range 192.168.1.2-192.168.1.254. For example, 192.168.1.100;
• Subnet mask: 255.255.255.0;
• Main gate: 192.168.1.1;
• Preferred DNS server: 10.0.0.1;
• Alternative DNS server: 10.0.0.2.

Then click OK → close.

Network card set up.

Windows 8.

In the Start pane, select "Desktop".

On the desktop, hover the mouse to the bottom or upper right corner of the screen, the panel will appear. In it, select the "gear" icon.

On the opened on the right of the panel, select "Control Panel".

In the control panel in the "View" field, select "Large icons" or "small badges" to display the entire list. Go to the "Network and Shared Access Center".

On the left pane, select "Changing the Adapter Settings".

Right-click on the Available Local Network Connection in this window, select "Properties".

In the window that opens, find "Internet protocol version 4 (TCP / IPv.4)", double-click on the inscription itself or click on it once, and then select "Properties".

In the properties of the Internet protocol, put a point in front of the "Use the following IP address" item and enter the following parameters:

• IP address You can choose any of the range 192.168.1.2-192.168.1.254. For example, 192.168.1.100;
• Subnet mask: 255.255.255.0;
• Main gate: 192.168.1.1;
• Preferred DNS server: 10.0.0.1;
• Alternative DNS server: 10.0.0.2.

Then click OK → close.

Network card set up.

2. Setting up the router

Web interface

Open the browser (recommended Internet Explorer.), In the address bar, enter http://192.168.1.1/ and press ENTER. In the "Connection to 192.168.1.1" window, enter the username of the admin and password (the Admin password is specified by default, you can change it in the router settings) and click OK.

Update firmware

If you do not need support for IPTV (playback of multimedia in the AKADO WINTRAY program), then firmware update optional. The router has steadily working with firmware versions 1.0.0.8, 1.0.1.6.

Upgrading firmware to version 1.0.2.1 of 05.10.2010 may only be needed while performing the following conditions:

• IPTV does not work in the AKADO WINTRAY program)
• Used firmware version 1.0.0.8 or 1.0.1.6

To update the firmware, follow these steps:

1. Select the Administration section.
2. Click the Microprogram Update tab.
3. select a file new firmware.
4. Click the "Submit" button.

The new firmware file can be downloaded unimensical from the official forum of the producer.

Network and Internet

Routing

Routing configuration is required for simultaneous internet and local network.

1. Select the "LAN" section.
2. Click the Route tab. Turn on multicast routing if IPTV support is required (playback of multimedia in the AKADO WINTRAY program).
3. Turn on static routes. Set the route with the following parameters:
   • Network IP address or host: 10.0.0.0
   • Network mask: 255.0.0.0
   • Gateway: your gateway
   • Metric: 1.
   • Interface: Man.
4. Click the Add button
5. After the route appears in the table, click the Apply button.

Pyring network

Not all programs can work correctly through the router. For some programs (DC ++, RADMIN / RDP / HTTP / FTP server), you need to adjust the port forwarding. Consider this procedure on the example of the P2P client.

In the P2P client for our network version 5 you need to go to file → Settings → Connection settings. The TCP and UDP port numbers indicated there will need to be prescribed in the router settings as shown below. If several computers are connected to the network, the ports in P2P clients must be different, if necessary, can be changed.

In other versions of P2P clients, you need to choose " Manual setting Faervola ":

Navigate to the router web interface and follow these steps:

1. Select the "WAN" section.
2. Click the "Virtual Server" tab.
3. Turn on the virtual server.
4. Add two virtual Servers For P2P client.
5. Click "Apply".

You did everything according to the instructions, however do you have something? - Carefully read the article "Features of a compass over the router", check if you did it right.

With questions about setting up equipment you can contact

This question particularly worries novice users, and most of all those who recently bought a router for organizing a home local network (+ access to the Internet for all devices in the apartment) and wants to quickly configure everything ...

I remember myself at this point (4 years ago): I spent, probably 40 minutes, while I figured out and set up. In the article I would like to stay more not only on the question itself, and also on errors and problems that usually arise during the process.

So, let's begin…

1. What you need to do at the very beginning ...

Buy router ... 🙂

The first thing is that - connect all computers to the LAN ports to the router (LAN port of the router connect the Ethernet cable with the LAN port of your network card).

Usually LAN ports of at least 4 on most models of routers. Included with the router goes at least 1 Ethernet cable (normal twisted para), respectively, you will enhance it for connecting one computer. If you have them more: do not forget to buy in the store along with the router Ethernet cables.

Your Ethernet cable for which you have been connected to the Internet (it was most likely connected to the computer network card directly) - you should stick to the router's jack for the WAN name (sometimes it is called the Internet).

After turning on the power supply of the router - the LEDs should flash on its housing (if you, of course, attached cables).

In principle, you can now go to the Windows OS configuration.

2. Definition of IP address and password with login login in the router settings (examples of Asus, D-Link, ZyXEL)

The first setting of the router must be performed on a stationary computer connected to the Ethernet cable. In principle, you can and from the laptop, only then still connect it through the cable, set up, and then you can wireless connection Go ...

This is due to the fact that by default, wi-Fi network In general, it can be disabled and you are in principle you will not be able to enter the router settings.

2.1. Setting up Windows OS

To begin with, we need to set up OS: in particular network adapter Ethernet through which will be connected.

To do this, go to the control panel on the next way: " Control Panel \\ Network and Internet \\ Network Management Center and Common Access". Here we are interested in the link " change adapter settings"(It is left in the column if you have Windows 7, 8).

Go to the Properties of the Internet Protocol version4.

And here will set the automatic receipt of IP and DNS addresses.

Now you can already go directly to the process itself ...

2.2. How to find out the address of the page settings of the router

And so, you run any browser installed on your computer (Internet Explorer, Chrome, Firefox). Next, drive your router settings page to the address bar. Typically, this address is indicated on the accompanying documentation for the device. If you do not know, here is a small sign with popular router models. Learn below, consider another way.

Table of logins and passwords (default).

If it happened, you can go to the settings of your router. You may be interested in configuring the following routers: ,.

2.3. If it did not work out

There are two ways ...

1) come in command line (In Windows 8, it can be done by clicking on "Win + R", then in the "Open" window, you must enter "CMD" and press the Enter key. In other OS, you can open the "Start" menu).

We are most interested in the line with the "main gateway". It is in it that contains the address of the page with the router settings. In this case (in the picture below): 192.168.1.1 (it and drive it into the address bar of the browser, password and login see just above).

2) If nothing helps - you can simply reset the router settings and bring it to the factory parameters. To do this, on the case of the device there is a special button, in order to click on it, you need to try: you need a pen or needker ...

On the D-Link DIR-330 router, the RESET button is located between the outputs for connecting the Internet and the power supply unit. Sometimes the RESET button may be on the bottom wall of the device.

3. Conclusion

Having considered the question of how to go to the router settings, once again I would like to emphasize that usually all the necessary information is in the documents coming with the router. Another thing, if it is written on the "barbarian" (not Russian) language and you do not understand anything in it or bought a router from the hands (they took friends / acquaintances) and there were no pieces ...

Therefore, the saying is simple here: buy a router, preferably in the store and preferably with the documentation going in Russian. Such routers are now very many different models, the price can vary significantly, from 600-700 rubles - up to 3000-4000 rubles. and higher. If you do not know, and just get acquainted with such a device - I advise you to choose anything average price category.

That's all. I go to the settings ...

To customize ASUS router, you need to connect. After, in the browser, click on the link - 192.168.1.1 . If you have not yet configured the device yet, will appear Quick Setup Wizard. If you need a login and password, then you collect the default fields admin. (It should be clarified by providers). The ASUS control panel will appear.

basic settings

The panel consists of general and additional Settings. Available opportunity viewing network cards, inclusion of guest internet, traffic control, and parental control. In the additional section, Wi-Fi is adjusted and configured firewall.

To checkif you are connected, you can go to the " Fast setting Network" Then choose " Check the connection"And" Go" In the displayed window, set the login along with the password. Click " Further" Then in the section " Setting up router»Fill the specified name (SSID) and network key (for connecting to the network).

Click " Apply" Will begin . After the Wi-Fi list, the network will appear with the name you specify. Connect to the device using a specified access key and return to this section. In the connection window, click " Further».

In most cases, the Internet must already earn, but if your provider does not support technology AutoIPT. tune Wi-Fi should be independently. In this case, after checking the connection, the section will open Internet settings».

Next in the list of choose The connection technology that is used by your provider. Then in the displayed window you will need to enter login and passwordwhich were provided by the provider in the contract. All information should be clarified by him if any problems arise. Maybe further need enter Another parameters that must also be taken into account (service name, IP address, etc.). After you need to do all the same actions that were described above.

Wi-Fi settings

On the main tab, there is always an opportunity to additionally. tune Your Wi-Fi. For example, in the section " the Internet" can change WAN-connection type, that is, if the provider changed the connection technology, you can switch it. In chapter " Network map»It is possible change key To connect Wi-Fi, as well as the username (be sure to click " Apply"). You can configure guest Network (It is not recommended if you need to control the Internet traffic) and impose parental control , if required rebatch Child from an unwanted resource.

You can also change Access key to the control panel by your router. To do this, go to " Administration", Further - " System" Enter new password and press " Apply"So that it entered into force. In other sections are mostly located additional settings Wireless and local Wi-Fi, which can be configured at their discretion.

How to reset router

If you forgot the password from wi-Fi Wi-Fiand the rest of the devices were not connected, try to go to control Panel on the cable and watch it there. But if there is no such possibility, it is recommended reset router By default settings.

To do this, behind the router there is a special button. Press and hold it about 15 seconds As long as the WPS indicator began to flash. The access key will be removed, It is necessary to do all the actions described in the article above. To avoid such situations when connecting to a computer, you should always install the checkbox " Connect automatically" Then the entrance to Wi-Fi will be made using autofill.