Configuring D-Link routers under the Provider "Stork. Setting up a network connection and input to the control panel of the router. Actions performed before adjusting the connection

In this instruction, we will customize the popular D-Link DIR-300A router. This is an inexpensive router for home use. Unlike D-Link DIR-300 / A / D1, which has already been removed from production, new model Available in a new very unusual case in the form of a cylinder. It is nice that you can purchase a router in such an unusual case.

I plan in the near future to prepare an article with advice on the choice of a budget router for home. Actually for this reason, I acquired D-Link DIR-300A. Since it is suitable for home use in all parameters, and refers to budget models. I liked the router myself. Unusual case, good quality Assembly, understandable control panel, and even rubber legs, which in budget models is a rarity.

As for the configuration of this model, the process itself is practically no different from the configuration of other D-Link routers. But I decided to prepare a separate instruction in which to show and tell about all the nuances. I will show how to connect the DIR-300A, how to go to the settings, configure the router to connect to the Internet, configure the Wi-Fi network, change the password, etc. I think this information will be useful to many. Moreover, the instruction that comes in the kit is not very informative.

You can configure the router from virtually any device, even from the phone, or tablet, connecting the network cable, or Wi-Fi. But if you have a stationary computer, or a laptop, then I advise you to configure the router from these devices. And best, at the time of the setting, connect to the DIR-300A on the network cable.

Connection and input to the D-Link DIR-300A settings

Connect the power adapter to the router, turn it on into the outlet, and turn on the power to the router itself.

If you configure a router with a PC, or a laptop, then take the network cable that walked in the kit, and connect the computer with the router. Cable connect to one of 4 LAN ports.

In the "Internet" port (it is yellow), connect the Internet. Cable from your Internet provider. By the way, in vain, they made a yellow wan port, and put a yellow network cable in the kit. Many will be confused.

If you want to configure connecting to a Wi-Fi network, connect your device to a wireless network that the router will be distributed immediately after switching on. The network will have a factory name. Most likely it will be "DIR-300A".

Password for connecting is shown from the bottom of the router, on the sticker. Signed as "WPS PIN".

The computer must be connected to the router. Connection can be without Internet access, it is normal.

If the router requests the username and password, please specify Admin and Admin. Address to enter the settings, and the factory parameters are also indicated on the sticker from the bottom of the router. My router immediately asked to change the factory password, which will continue to be used the share of entry in the settings instead of admin. Come up and write down twice new password. Try not to forget it.

Immediately change the language of the control panel into Russian, or Ukrainian.

Before setting, I advise you to update the router firmware. If there a new version. I prepared separate.

Connecting Internet connection

It is very important to properly configure our D-Link DIR-300A to connect to the Internet. If the router cannot connect to the Internet provider, it will not be able to distribute the Internet. Without this, it does not make sense to continue the setting.

You need to know exactly what type of Internet connection uses your Internet provider. And all the necessary parameters that must be specified to connect to the Internet. Also, it would be nice to clarify whether the provider does not use binding to the MAC address. And then you can have a very long time with the settings.

If you have connection Type Dynamic IP (without binding on the MAC address)And you have already connected the cable from the provider to the router, as I showed the photo above, the Internet via the router should already work. In the settings, right on main page You can see the connection status. If he is already green, then all OK. We skip this section, and go to setting up Wi-Fi network.

The green icon says that the router has already connected to the Internet.

If there binding on the MAC address, then here are two options: change the MAC address of the router on Mac computerTo which the Internet was tied, or call the provider support, and ask to bring a new MAC address of the router, which is specified on the device itself, from the bottom on the sticker (Mac ID).

You can clone Mac on the WAN tab by selecting the desired connection.

If you have a Beeline provider that uses the connection type - L2TP, or TTK, Dom.Ru, Rostelecom from which the connection type is PPPoe, then here you already need to specify some parameters.

Among Ukrainian providers are the most popular: Home Internet Kyivstar - Connection Type Dynamic IP. Will Provider, there is also a dynamic IP, but wash with reference to the MAC address.

D-Link DIR-300A: Configuring L2TP connection on the example of Beeline Provider

Go to the settings tab "Network" - "WAN". Check the ticks near the connections that are there, and click the Delete button. Then, click on the "Add" button.

Specify the username and password twice you received when connected to the Internet. Also write the "VPN server address". For Beeline, it is tp.internet.beeline.ru. Check if it is worth the check mark near "connect automatically". Click on the "Apply" button.

If you all pointed out correctly, the router must connect to the Internet. Connection will be with a green icon and the "connected" status.

PPPOE connection on DIR-300A (TTK, Dom.Ru, Rostelecom)

Just as I showed above, create a new connection, and choose the type pPPOE connections.

Specify the login and password that are listed in the Internet connection contract, and click the Apply button.

If the router does not want to connect to the Internet, then call the provider support, and specify the settings. Most likely, incorrectly specify some parameters.

See Stats Connection on the WAN tab:

Only after connecting to the Internet will be installed, it makes sense to continue setting up the router.

Setting up Wi-Fi network, password installation

Click the "Wi-Fi" tab - "Basic Settings". Here we can change the name of our Wi-Fi network. In the SSID field, suck the new name, and click the Apply button.

All, Wi-Fi network is configured.

Since we performed the basic settings, you need to save the parameters, and restart the router. Mouse over the "System" menu, and select "Save". Then reprove the cursor to the "system", and select "Reload".

After rebooting, a Wi-Fi network will appear with the title you specified during the setting process. To connect to the network, use the password that is installed.

Let's consider several settings. I will show how you can save all the router parameters to the file, and restore them if necessary.

Create a backup of the router settings

If everything works well, I advise you to do backup settings.

When you try to enter the router settings, it will ask you the username and password. Password we changed at the beginning of the setup. Factory Admin and Admin.

Move the cursor to the "System" item, and select "Get a copy of the settings".

Save the file to the computer, in a safe place. If necessary, you can restore the settings from the file in the "System" section - "Configuration".

So we finished the setting of this "booms". I hope you all happened, and you configured your D-Link DIR-300A. You can ask questions in the comments. Good luck!

Today there are hundreds of various routers on the market, which allow you to organize our own Wi-Fi network at home. D-Link company occupies one of the leading places in the list of manufacturers of this kind of devices. It produces a lot of different routers, among which the DIR 300 DIR 300 model is special place. It combines the optimal price and functionality, for which he received recognition among users. Often, the D LINK DIR 300 routers are purchased into offices, home, to the country and in various other rooms, where you need quality Wi-Fi signal. In this article, we will look at how to configure the D LINK DIR 300 router.

How to connect a router D Link DIR 300

Before you start directly to configure the router, you must connect it. To do this, you will need to do the following:

How to set up a DOTER D LINK DIR 300

After connecting the router, you can switch to its configuration. To begin with, you will need to create wireless network:

This can be considered the setting step local network Completed, now you should go directly to the configuration of the router D LINK DIR 300. Any router through the browser is configured. Follow these steps:

That's all, the router D LINK DIR 300 is completed. After these actions, the Internet should start working. But, most likely, you want to configure wireless Internet, this will require a few more steps described below.

How to configure Wi-Fi access point D LINK DIR 300

If you correctly configured the Internet itself according to the instructions described above, now you need to activate the point access Wi-Fi. It is required to have the ability to connect to the router from any devices through a wireless connection. This is done as follows:

How to connect via Wi-Fi to ROUTER D LINK DIR 300

The last step is very simple - this is a connection to the router via Wi-Fi. The connection method is no different from connecting to any other wireless access point. If your computer has Wi-Fi adapterIt is enough to turn on the wireless network connection, after which the corresponding icon appears in the lower right corner, indicating that it is possible to connect to the Internet via Wi-Fi. Click on this icon and select the DIR 300 DIR 300 access point by defining it by the name you specified as part of the setup.

Enter the previously specified password and connect to the network.

Note: ifWi-Fi adapter from your computer "external" connected throughUSB, the connection process may differ slightly. Most likely, the connection will occur after installing specialized drivers through the appropriate utility.

Installation and configuration instructions for the Internet router

DlinkDir.-300 , 330

Previously, you need to connect all cables to the appropriate connectors:

• Nutrition.
• Coming Ethernet provider cable (in the appropriate WAN port.)
• Ethernet Cable OT network card In any LAN port on the router. (Typically designated numbers.)

For Windows XP:

Go to the menu, , .

In the network connections window (Figure 1), click right-click mice on " "And select" Properties».

Figure 1. Network connections in Windows XP.

In the window " Local Connection Properties»(Figure 2) Select" Internet protocoltCP /iPProperties».

Figure 2. Connection properties over the local network.

In the window " Properties of the Internet ProtocolTCP /IP."(Figure 3) Choose:

· « ReceiveIP address automatically»

· « Get the AddressDNS server automatically»

and click " OK»

Figure 3. TCP / IP Protocol

For Windows 7:

Go to the menu

, , , .

In the window " Network Management Center and common access "(Figure 4) Press .

Figure 4. Window "Network and Shared Access" window in Windows 7.

In the window " Network connections "(Figure 5) Find" LAN connection", Press on it with the right mouse button and select" Properties».

Figure 5. Network Connections Window in Windows 7

In the window " Local Connection Properties"(Fig. 6)) Select" Internet protocol version 4 (TCP /IPv4) "(Without removing a tick) and click on the" Properties».

Figure 6. Properties of the local network in Window 7.

In the window " Properties: Internet version 4 (TCP /IPv4)"(Figure 7) Choose:

· « ReceiveIP address automatically»

· « Get the AddressDNS server automatically»

and click " OK»

Figure 7. TCP / IP Protocol

Next, to configure an external connection to the Internet you need to go to the router's control web interface. To get there to run any available Web browser and enter the router IP address in the address bar. Enter http: // and default IP address 192.168.0.1 (192.168.1.1) in the address bar of the browser. The URL in the address bar will look at: http://192.168.0.1 (http://192.168.1.1).

When entering you, you will be asked to enter the username and password (Figure 8) to access the router web interface. Enter them (by default Login "Admin" Password empty) and click " Authorize».

The main router web interface window will open (Figure 9).

1. Click the " Internet connection installation wizard»

Figure 9. Configuring Internet Connection - Installation Wizard

2. The window appears Masters fast settings "(Figure 10). Click " Further».

Figure 10. Setup Internet Connection - Installation Wizard 2

3. Change the password for access to the router web interface (Figure 11) (you can leave it for the same, but it is recommended to change it to enhance it). Click " Further».

Figure 11. Configuring Internet Connection - Installation Wizard - Password Change

4. Select the time zone (Figure 12). Click " Further».

Figure 12. Setup Internet Connection - Installation Wizard - Time Zone

Figure 13. Internet Connection Setup - Installation Wizard - Connection Type

6. Enter the credentials issued by the provider (Figure 14) (login, password and password confirmation again password). Click " Further».

Figure 14. Setup Internet Connection - Installation Wizard - Authentication

7. Click the " Connection"(Figure 15).

Figure 15. Internet Connection Setup - Installation Wizard - Application Settings

8. Now we configure Wi-Fi. Go to section " Installation", Item" Installing a wireless network"(Figure 16). Click the " Installation Wizard demon wired connections »..

Figure 16. Wireless Configuration - Installation Wizard

9. In the welcome window that appears, press the " Further"(Figure 17).

Figure 17. Wireless Configuration - Installation Wizard 2

10. Enter " Wireless Network Name (Ssid)"(Figure18) (The name of the wireless network is invented by you, it is used to find your wireless network from the set). Tick \u200b\u200bitem " Manually assign network key"Also, to improve security, it is recommended to put a tick in front of" UseWPA Encryption ..." Click " Further».

Figure 18. Wireless Configuration - Installation Wizard - Security

11. Enter " Network key"(Figure 19) (invented independently, will further be used to set a connection with a wireless network). Click " Further».

Figure 19. Wireless Configuration - Installation Wizard - Safety 2

Your Internet routerDlinkcustomized for pleasant work in the "Smile" network!

In the topic submitted, let's talk about how to configure the D-Link DIR-300 router. This model The router is the most popular among users, so questions on its configuration are relevant to this day. As an example, all settings will produce on Wi-Fi Routere DIR-300 revision NRU B5, from Internet provider Rostelecom. In particular, consider the process of connecting the router, wired and wireless settings wi-Fi network, set the password to enter its interface and connect to the wireless network. In a word, everything you need to create an Internet connection and a home local network.

Connection

Before you configure the D-Link DIR -300 router, it is certainly necessary to connect it to the Internet and to personal computer. For each of these connections, the router has its own connector on its rear panel.

As you can see, the Internet connection connector is designed to create an Internet connection, in which the provider cable must be blocked. All other 4 "LAN" connector are designed for wired connection Any peripheral devices - Computer, TV, Media Player, Receiver, etc. In a word, everything that has the support of this type of connection and can be part of the local network for the exchange of various types of data and Internet access.

Also on the rear panel there is a "Reset" button, designed to reset all settings to factory settings. Reset is carried out by long pressing the button for 5-10 seconds.

The front panel of the device contains indicators of controlling its operating status and all connections.

1. Power indicator
2. Internet connection. It has three types of signal - green (compound is installed), yellow (no connection) and flashing green (data transmission)
3. Wireless indicator connections Wi-Fi. Also has 2 types of signal - green (connection is installed) and flashing green (data transmission)
4. Indicators of connected devices. As all the remaining green glow signs that the connection is established. Blinking green that there is no connection

Pre-configure connection in Windows

Before you begin the configurations of the DIR-300 router, and any other, you need to make certain connection settings in the operating system itself.

Immediately, we want to pay attention to the fact that the Action Algorithm for Connection Setup in Windows 7, Windows 8 and Windows 10 is identical.

So, we need to see the properties of the Internet Protocol version 4 (TCP / IPv4). After that burn them or make a change. It's just done. We bring the mouse cursor on the connection icon in the notification area and by pressing the right mouse button on it, select the "Network and Shared Access Center" item.

After, click on the wired connections icon with the right mouse button and select "Properties" in the context menu.

In the next step we find the TCP / IPv4 protocol of interest to us and press the "Properties" again.

After all the actions done, we get into the section we need, in which it is desirable to set ticks - to get the IP address and DNS servers automatically. This will allow you to connect the computer to the local network without the risk of its conflict with other network devices at the network address level.

If you have no default data in the protocol properties, then just in case, rewrite all settings to the file and save it. It is possible if the need to assign each device in the local network of the static IP address, these settings can be useful.

Configure the D-Link DIR-300 router

So, proceed to the direct settings of the router. For this, as mentioned earlier, it must be connected to a computer or laptop. To open the D-LINK DIR-300 router interface, you must enter its IP address in the address bar of any browser. As a rule, it has a view - 192.168.0.1 or 192.168.1.1.

Make sure exactly network address You can watch your device on the label glued on the bottom of the router.

After entering the actual IP address, a window will open for login and password. As can be seen from the screenshot above, the default login and password are identical and have the look - admin.

Entering the D-Link DIR-300 router administration panel, you can proceed to its main settings. First of all, we are interested in the configuration of the Internet connection. To do this, open the "Network" section and click on this type Connections "WAN".

The settings window will open, where you want to select the connection type. The choice is given two types - IPOE and PPPOE. Which one to enter you can be viewed in the contract concluded with the provider or at a technical specialist by calling technical support provider.

In addition, there are several other settings on this page that can be useful.

• Mac is a unique network identifier. Can come in handy if your network device It has a binding to the MAC address. If so, then in this field you need to enter the MAC address of your PC network card. How to find out in detail described in
• Get an IP address automatically - put a tick if you set the appropriate setting at the TCP / IPV4 protocol setting
• Get the address of the DNS server automatically - similar to the previous item.

Setting up a wireless connection

To access the Internet through the router by means wireless connection You need to connect this feature. To do this, go to the "Wi-Fi" section - "General Settings" and set a checkbox "Enable Wireless Connection".

To give the name of the network go to the "Basic Settings" and in the "SSID" field enter the invented name. Immediately, select one of the operation modes of the wireless network. Optimal is considered - 802.11 b / g / n, as shown in the screenshot.

To install the password, go to the "Security Settings" section, where in the Count "Network Authentication" exhibit everything as in the screenshot below and in the "PSK Encryption" field fit the password.

note: Invented password will be required when connecting any mobile device to the created Wi-Fi network. Therefore, it is better to remember it. Otherwise, you will have to come back in the router settings to recall it.

Installing a new password on the entrance to the admin panel of the router

After all necessary settings Produced, it is better to progress and change the password to enter the admin panel, which defaults the login to more reliable. To do this, open the "System" section and in the "Administrator Password" paragraph, we prescribe a new protection code, after which we save the settings.

On this, the DIR-300 router is configured to create a wired and wireless Internet connection. If you need to create a local network, within which you can exchange files, listen to music and watch movies, let's say with a computer on a smartphone, then it is necessary to make a number of additional settings here, the list of which includes - Creating a working and home Group, open sharing folders and files, etc. However, the process of setting the local network via Wi-Fi router DIR-300 is described in detail in detail.

This instruction will describe in detail how to configure the Wi-Fi router D-Link DIR-300 NRU to work on the Internet from the stork (Samara and Tolyatti). The manual is fully suitable for wireless routers:

• D-Link DIR-300 NRU B5 (with firmware 1.4.x)
• D-Link DIR-300 NRU B6 (with firmware 1.4.x)
• D-Link DIR-300 NRU B7
• D-Link DIR-300 C1 (It is advisable to reflash, as described, otherwise it is terribly tupit on the austa)

The router setting is not such a difficult task and does not require a call to any master, after 15 minutes, if you follow this step by step leadershipEverything will work. Let's proceed.

In order to find out what a router model you have, refer to the sticker on the back side.

Connecting the router DIR-300

Despite the fact that the answer to the question of how to connect a Wi-Fi router to a computer seems to be granted, just in case I will still carry it out with a separate item.

So, behind the DIR-300 there are 5 ports, one - the Internet, connect the Internet cable to it. And one of the LAN ports (recommended LAN1) connect the attached cable with the corresponding port of the computer network card. After that, you can turn on the router into the outlet.

Checking the local network connection settings

Another point to note that in the future the questions did not arise about why it does not enter the router settings - it is to check the settings for connecting the local network on the computer. Even if you have never changed anything there, it could make various applied programs.

In order to carry out this, in Windows 8 and Windows 7, go to the Control Panel - Network Management Center and Sharing and click on the left "Changing Adapter Settings", and in Windows XP - go to the Control Panel - Network Connections.

After that, right-click on the "Local Network" icon, in the context menu, select "Properties", will open properties of this connection.

In the list of components used by connection, select "Internet version 4" protocol, and click on the "Properties" button. Then, see if the IP addresses and DNS servers are set to "receive automatically", as shown in the picture below. If not, make appropriate changes.

Setting up PPTP connection stork on Wi-Fi router DIR-300

Important note before tune: if you are connected to a stork connection in a stool of a stork online or anywhere else, disconnect it. If not connected - do not connect. The fact is that the router setting is to configure the router so that it will install the connection to the Internet itself, and then distributed to other devices on the local (over a wire) and wireless network. If you start the stork on a computer, then the router cannot do this, in connection with which you will encounter a very frequent situation when the Internet is on the computer, but no on a laptop or phone, although they are connected byWi-Fi. Hopefully explained quite clearly.

Now, in fact, the main setting step is to configure the connection parameters for the stork. In order to do this:

Run any browser and go to the address 192.168.0.1 - this is the internal address of the web interface of the router settings. If you have previously tried to configureD-LINK.DIR-300, I recommend pre-reset the device to the factory settings. To reset the router, press and hold the button within 10-15 seconds.RESET on the back side (the router must be connected to power at this time). After that, release it and wait half a minute, during which the router will reboot.

A username query (login) and passwords that are needed to go to the router settings will appear. Standard values \u200b\u200bfor DIR-300 NRU - Admin and Admin in both fields for input. After the first input you will be asked to change standard password on any other. Do it.

After the input, you will find yourself on the main page of the D-Link DIR-300 wireless router settings, the "Advanced Settings" link is located, click on this link.

Configuring routers for a stork has one feature, due to which many people have difficulty - you need to change the local address of the router, for this, in the "Network" paragraph, click "LAN" and in the IP address field on the next page, replace 192.168.0.1 on 192.168.1.1 and click "Save". A window will appear that reports the need to confirm the change in the DHCP address pool, click OK.

At the top to the right there will be a notification that you need to save the settings and restart the device. Perform this action. In the future, speaking about this notification, I will write "Click Save at the top right."

A strip will appear on the screen reporting that the router reboots. Do not make anything for a couple of minutes (the page itself will not be updated), after which, go to the D-Link DIR-300 DIR-300 NRU, but now use the address 192.168.1.1 (just enter it into the address bar and press Enter, not paying attention. That the progress strip still "runs" there and here).

Now you need to fill all the parameters for the Internet connection stork. To connect, you need to use the following set of parameters:

• Connection Type - PPTP + Dynamic IP
• Username and password - your data from the Internet Stork
• VPN server address - Server.avtograd.ru

The remaining parameters can not be changed, click "Save", and on the next page, click "Save" at the top on the right. Wait a minute and refresh the page, you will need to see that the status of the connection you created has changed and now it is "connected". Press the "Left" arrow on the page to return to the router settings page. The next step is to configure the wireless network.

Configure Wireless Wi-Fi Network

Already, even without configuring anything in the Wireless Network settings, you can use it, but it's better to do some settings, including and put a password on Wi-Fi, this will allow you not to worry about the fact that You are low the speed of the Internet due to the fact that your neighbors also use it besides.

On the Advanced Settings page in the Wi-Fi item, select Basic Settings.

Here you can specify the name of the Wi-Fi access point (SSID) - just enter something like Latin characters to distinguish your wireless network from neighboring. Click "Save". Return to the previous page. And select "Security Settings" in the "Wi-Fi" paragraph.

Here you can put the desired password on Wi-Fi. Recommended Type of Network Authentication - WPA2-PSK. The password is entered in the "PSK Encryption key" field and should consist of at least 8 Latin characters and (or) numbers. Click "Save", then save once again.

On this configuration of the D-Link DIR-300 NRU router for a stork provider, you can read the completed - already now you can connect from the phone, tablet or laptop and use the Internet without wires.

If you do not know what "Internal Stork Resources" is, the next point of the instructions can not be performed.

Routing configuration to access local resources stork

In order for you to also be available and local stork network resources, you should configure routing in the router (even if you previously prescribed routes on the computer). In order to do this:

1. In the "Status" of extended settings, click the "Network Statistics" link and pay attention to the "Main Gateway" value for connecting Dynamic_Ports5, remember this value.
2. Now, on the advanced settings page, after returning there, in the "Advanced" item, click the "Routing" link (you need to press the double arrow to the right to appear this item).
3. Click "Add", after which you enter two routes with the following values: The gateway is the one that you remember in the first paragraph. For the first route: Assignment Network - 10.0.0.0, Subnet Mask - 255.0.0.0. For the second: destination network - 172.16.0.0, subnet mask - 255.240.0.0. Save the changes twice (once at the top right).