Nokia C3 Protective code standard. Secret codes for Nokia C3. Questions and Comments on Secret Codes for Nokia C3

Codes and passwords are a sign of the modern world. People wish to keep personal information, and manufacturers of technology, especially mobile, go to meet them. In addition, protective codes and passwords are called upon to protect this technique from non-professional intervention, sometimes unsafe for the functioning of the device. The harder the device, the more of its various options, the incorrect change of which can lead to a breakdown or complete failure. But what if you want to change settings or connecting other devices, for example, the SIM cards of another operator, and the access code is lost? Phone manufacturers laid the ability to reset the access codes to the functionality at the programmatic level of different orders. Of course, the widely known such information does not make it to support the service centers and protect the personal information and the performance of the device when it is loss of unauthorized persons. However, not everyone has the opportunity to refer to specialists, and simple forgetfulness often leads to the loss of passwords and access codes. Here is how to remove the protective code with " Nokia, "find out or change it on various phones and smartphones of this company, and it will be speech.

Simpled solutions

It is not worth configuring the "Nokia" security code with the SIM card PIN, to unlock the card, it suffices to contact the operator or contact the communication services salon, where the PUK code can be reported to unlock the SIM card or give a duplicate.

Consider several ways and begin, perhaps, with the safest and apparent. Even professionals allow the simplest shortcomings sometimes, so you should not miss them. To begin with, you should try the defense code "Nokia" 12345, installed on the phones and smartphones of the company Nokia by default. In the event that no one changed it, it will suit.

A warning

Attention! All further manipulations with the phone user can perform at its own risk. In the case of a valid warranty on the device, it will be better to contact a special service center for qualified assistance. In any case, the responsibility for actions with the phone, one way or another, carried out on the recommendations of this article, nor the author nor the administration of the site. You should also remember the danger of computer infection with malicious software when used third-party resources While searching, downloading and installing programs specified in the article. Merifying request to enjoy antivirus programs. In the course of some actions, data from the phone can be lost, it is worth keeping a phone book, photo and video on a computer or external medium.

Using IMEI.

The next step in unlocking the phone, if the standard Nokia Protection Code did not approach and after three attempts, the phone may have been blocked, the definition of a special master code for resetting the protective password of the phoneaboutIM.EI.INTERNATIONAL MOBILE EQUIPMENT Identity- A combination of 15 decimal digits for each mobile device is unique for each mobile device, which can be found by looking under the back cover of most devices. Another way can be causedIMEIon the screen of the mobile phone, typing *#06# and pressing the call button. Next, it should be found on the network that provides the generation services for the Master Code of the PhoneIMEI.Most often this service is available only once a day for oneIP.So that fraudsters could not unlock stolen phones in parties for the needs of the usual user, this is quite enough. Also on the network you can find the generator application and download for personal use. It seems the online service is somewhat safer than the application, but the downloaded generator can be checked for an antivirus forcibly. We enter the combination obtained in the generator at the request of the phone and change the protective code on the "Nokia" or leave the standard one.

Methods of using a computer

There are other options, how to remove the protective code with "Nokia", but to work with special programs you will need a suitable USB cable and computer. Remind O. backup copying data if such an opportunity exists. Software intervention often leads to the reset of all user data and loss of personal files. To work properly, you may need a driver for Nokia devices. You can install the Nokia PC Suite utility, which includes a driver for all phones and smartphones "Nokia" by default, or download and install the Nokia Connectivity Cable Driver separately. Please note that the driver is preferably installed when the USB cable is disabled.

MynokiaTool.

Easy to use the MyNokiatool utility from the developer under the Nick Jaidi allows you to learn the defensive code "Nokia", reset it, and also has a pair of others useful features. The program does not require installation and can work immediately after unpacking the downloaded archive. The phone must be connected to a computer in PC Suite mode or in Nokia mode on some devices. All Nokia PC Suite, Ovisuite (Nokia PC Suite, Ovisuite and Other) needs to be disabled, pause the operation of the antivirus at the time of interaction with the phone and run Mynokiatool. Using the "Connect" button, the program will contact the phone, will determine its model and prepare for work. On the Main tab using the "Read Code" button, you can find the security code installed on the phone at the moment. Actually, this is all we need, but the program allows you to make a few more operations, the description of which can be searched separately. On the STAFF tab, you can reset all (the defensive code on "Nokia" will be reset to the standard 12345 for mobile devices "Nokia") of the phone settings to the factory, as well as test the operation of the device. Next, the "Disable" button must be completed with the phone, disconnect it from the computer, turn off and remove the battery for a few seconds. Thus, the phone will completely reboot and apply all the set settings.

Hard reset

Modern smartphones support a complete reinstalling system with a network disk formatting. This operation is irreversible and returns all the factory settings, losing the setting of all installed programs. Including replaces the installed security code, will reset all timers and delete all the information. Manufacturers have provided the possibility of accidental pressing of such combinations, to properly perform the so-calledHard Reset.you have to use both hands. The combination of the volume buttons is most often used.“-”, menu and cameras. It is necessary to hold them on the phone off, after which it simultaneously press the inclusion button until the inscription appearsNokia,after that, the power button can be released, and the rest to hold until the installation information appears. Specific key combination It is for your phone on the Internet, as different models are equipped with various control buttons, for example, forNokia Lumia 920.the sequence of pressing certain keys is triggered. The protective code after reinstallation will be standard, 12345.

This is not all ways,how to unlock the defensive code of the phone "Nokia"there are still phone firmware programs such asJ.A.F.andPhoenix,working with which will require more advanced skills and knowledge. It remains to wish only success in repairing and improving your phones.

Many wonder what to do if I forgot the Nokia factory password on the phone? In this record, we will describe everything and provide all possible password variations.

If you do not have a push-button phone, then see. ATTENTION Maybe after entering the password, all data will be deleted! Security Password Default: 12345, 0000 For most Nokia phones. If you did not fit the listed options, try another Nokia password: 00000000 (8 zerosh) 1234, 00000. Also, we may not specify not all options if you know others share them in the comments. If you helped you share her with friends.

This method resets your phone to factory settings. Attention! You do it at your own risk! Remove the SIM card and memory card from the phone to reset. All data from the Nokia phone (contact book, photo, messages, programs, games, files) will be lost! Please, if you can do backup!

The default reset code is on the push-button phones: * # 7780 #, after entering this code, enter the password 12345. (It does not work on all models). Also try entering the code: * # 7370 # or * # 62209526 #, to reset the default settings, the Nokia password will become 12345.

Important: Nokia® 2760/3555/5310/5610/6263/6301/7510 Phones have no default security password preset. When executing a function that requires a security password, you must create it.

When configuring a security password, it is strongly recommended that it is set to 12345. This allows you to have a "default" security password programmed in the Nokia phone. If you prefer another Nokia password, please save it for further use.

Not created / I do not know security password

Read the following information:

Default security code 12345 For most Nokia phones.
If you enter the wrong security code five times in a row, the phone is further attempts to enter the code.
Wait five minutes and enter the code again.
Please note that the security code generator is not approved currently from Nokia.

How to unlock Nokia password if you forgot it?

To unlock access to your phone if you have forgotten your Nokia phone password (Do not password SIM). Just enter the IMEI number (serial number) for your phone below to calculate the master code in order to provide you with access.

Please note that this is not a network unlock code.

It works not on all Nokia models. Note - Use it completely at your own risk. We are not responsible for any damage to the phone or data loss on your phone or computer.

Nokia security password unlocking procedure:

Connect the phone via USB cable in PC mode and install drivers for your cell phone included in the Nokia PC kit, then exit the PC package.
Next
Select a USB virtual disk during installation (in the case of Nokia 6120C) (for Nokia 5700, use diamond protection)
After installation, open it
Press the scan button. Then click on phone information
Click on scanning
Click on the Permanent Memory tab specified at the bottom of the application. Press in order to read
It will read the permanent memory file and write it to the disk
Your PM file will be on the way:
C: \\ Program Files \\ Nss \\ Backup \\ PM \\ 356252 *********. PM.
Open PM file in notebook
Now scroll to the field, and the protective code is saved on the 5th entry
Find something like 5 \u003d 31313131310000000000
Delete all the numbers "3" and it will look like this:
5 \u003d 11111 0000000000 Now the first five digits is the code "11111".

Nokia.
* # 746025625 # [* # SIM0Clock #]
# 92702689 # [* # war0Anty #]

# 7370925538 # (Valet Code Reset) 6230
* # 746025625 # [* # SIM0Clock #]
# 92702689 # [* # war0Anty #]
To access the device's service menu, you need to dial * 3001 # XXXXX #, where XXXXX is a security code (Security code), which is 12345 by default. In such a way, to enter the menu, you will need to dial * 3001 # 12345 # in this mode, for example , You can change the name of the network operator displayed in standby mode. To do this, select NAM1, scroll to the Alpha Tag subparagraph, change it as desired (for example, write Vovochka and click OK. The output from the mode is turned off and on the phone.
It is possible that this code is operational and on other models of phones (51xx, 61xx).

* # 0000 # -Reen of the birth and version of the information of the phone
* # 06 # - Many IMEI phones
* # 92702689 #Khoe then * a dirty menu, I do not know what for what
# 3370 # and * # 3370 * -Bell and off Quality of communication - Togo, but not all operators this crap is supported. Nokia himself was re-overwhelmed V 5.79

service code Nokia 5120 & 5125:
output of the above is another service code
1) * # 639 # (* # new #) serves to add a number that can be prescribed several phone numbers, and switch between them.

2) * # 92772689 # (* # Warranty #)
1)Serial number
2) date of release
3) reprogramming date
4) date of last repair.
5) includes data transfer
6) Total conversation time.

3) * # 837 # OR * # Ver # version of the phone (not supported by all models)

4) * # 9999 # OR * # 6120 # version of Softa (not supported by all models)

before changing something in the settings
Think well, can you get back everything in place
Especially in paragraph 1
Change the name of the operator is not possible on all Nokia models in the last models, this chip is blocked by the manufacturer.
the only (almost) plus this service code * # 3001 # 12345 # is the ability to restore the "forgotten" password for the inclusion of mobile.
And the second plus - the level of the received signal is visible.
Nokia 2110.
Show Emei Number * # 06 #\u003e
Show version software phone * # 9999 #\u003e or for 2110i * # 170602112302 # \u003e\u003e or * # 682371158412125 #\u003e
Show phone production date * # 3283 #\u003e

3110
Show Emei Number * # 06 #\u003e
Shows the version of the software * # 3110 #\u003e
Restores factory settings * # 7780 *\u003e
Log in to a special menu * # 92702689 #\u003e Teams in a special menu:

5110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function. # 3370 #\u003e
To enable EFR * 3370 #\u003e
To reduce battery discharge speed and turn on HR (Half Rate) * 4720 #\u003e
To enable HR # 4720 #\u003e
To disable the SP encoding (provided that the machine PIN is enabled): When you request a PIN code, click "C", then the "Up Arrow" or "Down Arrow". Click "C" until the display is cleaned. After that, enter the command to change the PIN code, but do not change it in fact - ** * PIN * PIN * PIN #\u003e The only problem is that this procedure will have to repeat each time the device is turned on.

6110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function. # 3370 #\u003e
To enable EFR * 3370 #\u003e
To reduce the speed of the battery discharge and turn on the HR (Half Rate) function * 4720 #\u003e then turn off and on the phone again.
To enable HR # 4720 #\u003e
To view IMEI numbers * # 06 #\u003e
Show version of Software * # 0000 #\u003e
Log in to a special menu * # 92702689 #\u003e Teams in a special menu:
6232 OK shows the month and year of release
7332 OK shows the date last change in a programme
7832 OK shows the date of sale (if introduced)
37832 OK You can enter the date of sale MMYY (carefully! Then you can not change)
9268 OK Shows Serial Number (IMEI)

7110
View firmware version * # 0000 #\u003e
View IMEI * # 06 #\u003e
Login B. service menu: * # 92702689 #\u003e Consistently pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2 mm / yy (release date)
3 Purchase date (here you can enter the purchase date if your phone is new. Remember that the date is entered once and if you have improper date, it will be fixed later!
4 repair date (if repaired)
5 Date of transfer to the user? ATTENTION: To exit this mode, you need to turn off and re-enable the device.
SIM-CLOCK STOP Mode Card Support (only for firmware version 5.24 or later) * # 746025625 #\u003e
Enable Enhanced Full Rate Codec (EFR): * 3370 #\u003e will be activated after rebooting the phone (consumes more energy) Disable Enhanced Full Rate Codec (EFR): # 3370 #\u003e and EFR will be disconnected after rebooting the phone
Enable Half Rate Codec: (available only for firmware version 4.33 or earlier) Enter * 4720 #\u003e and Half Rate mode will be enabled after restarting the phone Disconnect Half Rate Codec: Enable Enable # 4720 #\u003e and Half Rate Codec will be deactivated after rebooting the phone

Smartphones

* # 06 # - IMEI smartphone (IMEI number - consists of 15 digits, it is unique and have every phone). This number must match the number on the box.
* # 0000 # - firmware number
safe Mode ("Parades" + Power)
* # 7780 # - Restoration of the original (workers) Smart settings
* # 7370 # - Reset smart to factory settings (i.e., the entire software is removed, catacks, calendar, etc. - Smart becomes clean!)
ATTENTION! To use the last two codes, you will need to enter the phone lock code (default 12345)!
Safe Mode when you turn on the phone - "Pencil" + "Power Buttion"
Loading in SAFE:
1. Turn off the phone
2. Press "Pencil" (and not let go)
3. Press the power button
4. Keep "Pencil" until full download !!!
* # 2820 # - the unique address of the Bluetoth module of your device (may be needed to other devices that do not know how to display names).
# 7370925538 # - Clamp of "wallet" (for 6600 and above - in which there is a "wallet").
* 3370 # (The phone must overload) improves the sound quality (using EFR), but reduces battery life.
# 3370 # - resets the sound quality to normal (cancels the code * 3370 #).
EFR Codec (Enhanced Full Rate)
This function when it is turned on, in theory, should significantly improve the quality of the transmitted speech, but, unfortunately, it must be supported by the cellular operator. When it works, the power consumption of the phone in the conversation mode (about 5%) is slightly increased. As far as is known, none of the Russian cellular operators support this function. The principle is based on another speech compression algorithm (Acelp) and occupies a wider frequency band.
* 4720 # - Enable Half Rate Codec (HFR)
# 4720 # - Disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly worsens the quality of speech, but the battery saves somewhere by 30%. Again, must be supported by a cellular operator.
# 92702689 # - Log in to the service menu [* # war0Anty #]

Nokia 6600 Secrets and Other Smartphones

* # 06 # - IMEI smartphone

* # 0000 # - firmware number

* # 7780 # - Restoration of the original (workers) smartphone settings

* # 7370 # - reset the smartphone into the factory settings (all software is removed, catacks, calendar, etc. - the phone becomes clean)

* # 2820 # - Bluetooth code (unique Bluetoth-module address)

* # 7370925538 # - Occup of "Biders" (for 6600 and above - and which there is a "binary").

Safe Mode Power on the phone - "ABC" + "Power Buttion" (in 3650 "ABC" is "Kapandashik")

Pension in SAFE:

1. Turn off the phone
2. Turn "ABC" (and want)
3. Press the inclusion button
4. Dispatch "ABC" to the body of the phone to the phone !!!

And here is another additional way Physics of the phone (with the functions of all data), to that fly if you can't even download the cherished code * # 7370 # or even dying TYBCY: In the off state, clamping the currently key, green for an answer, asterisk and key "3". And turn on TYBY, not send keys. Fools will come.

To use codes * # 7780 # and * # 7370 # You will need to enter the blocking code (default 12345).

## 002 # Cancel all forwarding.

** 004 * Number # include redirecting all calls to the entered number.

Secrets Nokia 3210, 3310, 3330, 8210, 8250, 8850, 9110

Shows the serial number of the phone (IMEI)
*#06#

Software version
*#0000#

1 line - version
2 Row - release date of the program. providing.
3 Row - type of phone.

Warranty codes:
# 92702689 # (\u003d * # war0Anty #)
A request will be issued to enter a "warranty code" type,

The screen will display the service menu:
IMEI (International Mobile Equipment Identification)
MM / YY phone release date
Phone purchase date
Repair date
Provide user data?

* 3370 # - activation of the mode of full-digit coding (the quality of communication increases, the battery life decreases)

# 3370 # - Deactivation of the mode of full-digit coding.
Note: After entering these codes, the phone will be restarted with new installations.

Check if you can stop SIM Clock:
# 746025625 # (\u003d * # SIM0Clock #)

Codes to determine whether Lok is installed on the device or not
Your nokia can be blocked by 4 seals:
SPROVIDER-LOCK - 1
NETWORK-LOCK - 2
Country-Lock - 3
SIMCARD-LOCK - 4

To check the status of these slots, a string is entered:
# PW + (MasterCode) + (Y) #, where
- P \u003d Press * 3 times
- w \u003d Press * 4 times (in the original on the contrary W - 3 times, P - 4)
- + \u003d Press * 2 times
- Mastercode \u003d exactly the thing that was born your device. But to check the status introduced 1234567890
- Y \u003d number from 1 to 4

If the phone is blocked by SP (Service Provider) code that is uninvistened, then try the following:

1. The request must be enabled. PIN code;
2. Turn on the phone;
3. When querying the PIN code, press C, then the up or down arrow;
4. Press and keep the display will not be cleaned;
5. Now enter the command to change the PIN code, but without changing it;
** 04 * Pin * Pin * Pin #
This operation must be repeated each time the device is turned on.

Half Rate Codec:
Turning on:
* 4720 # - Half Rate will be activated after the phone overload (power consumption decreases)
Shutdown:
# 4720 # - Half Rate will be turned off after the phone overload
Enhanced Full Rate Mode allows you to get you much better sound quality with the same bit of the transmitted information, but the network of your provider loads, the length of the conversation time decreases by about 5%

Half Rate Mode is a worsening sound quality, but unloads the network and allows the provider to skip more calls through it, the length of the conversation time increases by about 30%

Security Code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC \u003d Type Approval Code (2 first numbers \u003d country code).
FAC \u003d Final Assembly Code (for nokia fac \u003d 10).
SNR \u003d serial number.
SP \u003d SPARE (always sp \u003d 0).

** 04 * OldPin * new * new # - change PIN code

** 042 * OldPin2 * Newpin2 * Newpin2 # - change PIN2 code

** 05 * PUK * NEPIN * NEPIN # - Unlock PIN Code

** 052 * PUK2 * NEPIN2 * NEWPIN2 # - Unlock PIN2

* # 35 # - Check the status of blocking all incoming calls

** 35 * code # - activate blocking of all incoming calls

# 35 * code # - disable blocking of all incoming calls

* # 33 # - Check the status of blocking all outgoing calls

** 33 * code # - activate blocking all outgoing calls

# 33 * code # - disable blocking of all outgoing calls

* # 330 * Code # - Check the status of blocking all calls

** 330 * code # - activate blocking all calls

# 330 * code # - disable blocking of all calls

Nokia Code Function.

* 3370 # THIS Nokia Code Activates Enhanced Full Rate Codec (EFR) - Your Nokia Cell Phone Uses The Best Sound Quality But Talk Time IS Reduced My Approx. five%
# 3370 # DEACTIVATE ENHANCED FULL RATE CODEC (EFR).
# 4720 # 4720 # 4720 # 4720 # Activate Half Rate Codec - Your Phone Uses a Lower Quality Sound But You Should Gain Approx 30% more Talk Time.
# 4720 # 4720 # 4720 # 4720 # 4720 # 4720 # 4720 # 4720 # 4720 # 4720 # 4720 CAN DEACTIVATE THE HALF RATE CODEC.
* # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 # 0000 DISPLAYS Your Phones Software Version, 1st Line: Software Version, 2nd Line: Software Release Date, 3rd Line: Compression Type.
# 9999 # 9999 # Phones Software Version If * # 0000 # Does Not Work.
* # 06 # FOR CHECKING THE INTERNATIONAL MOBILE EQUIPMENT IDENTITY (IMEI NUMBER).
# PW + 1234567890 + 1 # Provider Lock Status. ( use the "*" Button to Obtain The "P, W" and "+" Symbols).
# PW + 1234567890 + 2 # Network Lock Status. (USE The "*" Button to Obtain The "P, W" and "+" Symbols).
# PW + 1234567890 + 3 # Country Lock Status. (USE The "*" Button to Obtain The "P, W" and "+" Symbols).
# PW + 1234567890 + 4 # SIM Card Lock Status. (USE The "*" Button to Obtain The "P, W" and "+" Symbols).
* # 147 # THIS Lets You Know Who Called You Last (Only Vodofone).
* # 1471 # Last Call (Only Vodofone).
# 21 # THIS Phone Code Allows You To Check The Number That "All Calls" Are Diverted To.
# 2640 # Display Phone Security Code in Use.
* # 30 # Lets You See The Private Number.
* # 43 # ALLOWS You to Check the "Call Waiting" Status of Your Cell Phone.
* # 61 # ALLOWS You to Check The Number That "On No Reply" Calls Are Diverted To.
* # 62 # ALLOWS You to Check The Number That "Divert If Unreachable (No Service)" Calls Are Diverted To.
# 67 # Allows You to Check The Number That "On Busy Calls" Are Diverted To
# 67705646 # 67705646 # PHONE CODE THAT REMOVES OPERATOR LOGO ON 3310 & 3330
* # 73 # RESET PHONE TIMERS AND GAME SCORES.
# 746025625 # 746025625 # 746025625 # DISPLAYS THE SIM CLOCK STATUS, IF Your Phone Supports This Power Saving Feature "SIM CLOCK STOP ALLOWED", IT Means You Will Get The Best Standby Time Possible.
# 7760 # MANUFACTURES CODE.
# 7780 # Restore factory settings.
# 8110 # Software Version for the Nokia 8110.
# 92702689 # DISPLAYS - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of Last Repair (0000 for No Repair), 5.Transfer User Data. To Exit This Mode You Need to Switch Your Phone Off then on Again.
# 94870345123456789 # Deactivate the pwm-mem.
** 21 * Number # Turn on "All Calls" Diverting to the Phone Number Entered.
** 61 * Number # Turn on "No Reply" Diverting to the Phone Number Entered.
** 67 * Number # Turn on "On Busy" Diverting to the Phone Number Entered.
12345 This Is The Default Security Code.
press and Hold # Lets You Switch Between Lines.

INPUT OF ALL "INDICATIONS" Directly One Behind The Other - Without "Blanks" (The Better Overview).
Code.
last Change Function / Description / Information
*# 06 #
12/16/03 Seriennummer / IMEI INDICATES (Actually Also A GSM IS Code - See Further Below)
*# 0000 #
12/16/03 SW Version Announcements (E.g. v3.42.1, 16-10-03, NHL-10)
*# 2820 #
12/16/03 Bluetooth (BT) Device Address Indicate.
xx #
12/16/03 Directory Quick Access (XX \u003d Storage Location and Afterwards Lozenge E.g. 24 #)
A / FROM KEY
12/16/03 Short Pressing for Menu for Switching Between Profiles
Menu Key.
12/16/03 Long Pressing for "Task Manager" - Switching Between Active Programs (With "C" Key Programs Can Be Terminated.)
Menu Quick Access
01/18/04 Over In The Menu E.G. To Point 3.1 Arrive Simply 31 Enter (If The Third Symbol A File Is Opened Is For the First Program / Icon).
AUTOSTART GOROD.
12.28.03 WHEN SWITCHING ON OF THE HANDYS ON TO THE PIN INQUIRY THE KEY "ABC" (PIN) COMES THE WHOLE TIME KEEPS PRESSED - THIS IS TO IGNORE (ALLEGEDLY) The AutoInitialization Programs.
#
02/15/04 Don't Switch Between Different Lines (AS) ... Goes E.g. With Austrian One Handys (See Nose Cunning). I COULD NOT TRY OUT HOWEVER ALSO, SINCE I DID NOT HAVE 2 LINES ON THE SIM MAP.
12345
12/16/03 ... Is According to Standard Set The Nokia Nokia-Sicherheitscode.
0000
12/16/03 ... IS According to Standard Those (with Vodafone Windshield Frame Section) Set 2Te Pin and That Standard Net Code / Password
With D1 The Standard Net Code IS The Last 4 Numbers of the Card Number Worthout HLR E.G. 99999234-5 / 55 -\u003e 2345
0 - For a Long Time Press
10.25.04 IF One The "0" In The Main Menue for a Long Time Presses Those Homepage of the Standard WAP Connection Is Called.

________________________________________ ________________________________________
Caution - Starting From Here Codes Are "Dangerous"
*#7370925538#
* # Of Res Wallet #
12/28/03 ... Is to Be Deleted The Code Around The "Wallet"! INPUT LIKE NORMAL TELEPHONE NUMBER (NOT IN WALLET CODE INQUIRY Windows).
Note! Afterwards The "Wallet" IS Empty, Can Again Be Put on However With New Code.
*# 7780 #
01/17/04 The "Original Attitudes" and Telephone Re-Establishes Is Again Started (An ApproPriate Inquiry and It Follow Before Must The Sicherheitscode Be Entered).
Note! Afterwards Various "Attitudes" Are Away - Among Other Things These:
Points of Entrance (Provider Dependent Points of Entrance and Attitudes)
Bluetooth attitudees.
Favorite.
Allocation Of The Two Keys (Beside Navi Keys) in The Main Menue
Profiles Are "Neglected" (As With Distribution) - Still There However New Bell Tones, etc. Are ...
SMS / MMS / E Mail Attitudes
Logos and Spielstaende (Allegedly) Also Deleted ...
Programs, Calendars and Contacts, etc. Not Changed ...
Also The Sicherheitscode Remains.
This Putting Back Goes Also Via Menu Under "Attitudes - General - Original Telephone Once.".
*# 7370 #
21.01.04 Soft Format: If the Handy (Only Telephone Memory) Formats, Puts Back The Attitudes (See * to # 7780 #) And Implements a Software Reset. (However Still Another Inquiry Comes Before.)

This is "Only" a Soft Format ... Hard Format WITH "GREEN, 3, *" ... See Below.
Green, * 3
01/21/04 Hard Format: If the Handy (Only Telephone Memory) Formats, Puts Back The Attitudes (See * to # 7780 #) And Implements a Reset.
Note! If The Akku To 75% Are Loaded At Least, Akku Do Not Only Accomplish During The Procedure Under Any Circumstances Remove! The Procedure Takes Some Minutes (Approx. 3-4), IS Absolutely Waiting!

Proceeding: Equipment Switch Off, Which Keep "Green Key" (Take Off) At the samet time pressed, "*" and to "3" Key and Switch Thereby Keep Further Press) ... to "formatting "ON THE DISPLAY APPEARS ...
IF That Does Not Function, Then Equipment for 1 Hour Switch Off, Akku So for a Long Time Rausnehmen and Again Try.
"Only" Virtual The Memory Is Generally Cleared - Genuine Formatting Can Take Place Only in A Nokia Service Center, If The Fash Is Deleted There and / or New L.G. IS Installed.
Mixed.
12/16/03 * # 92702689 #, Then Switch - System Menu Off (Goes With Me Not)

THE FOLLOWING CODE DO NOT FOLD (WITH ME ALSO):
* EFR0 # (* 3370 #) EFR Activate (EFR \u003d ENHANCED FULL RATE CODING - LANGUAGE OPTIMIZATION)
# EFR0 # (# 3370 #) EFR SWITCH OFF
* HRC # (* 4720 #) HRC Switch ON (HRC \u003d Helped Rate Coding - Language Compression)
# HRC0 # (# 4720 #) HRC SWITCH OFF
SIM Lock.
12.01.04 Simlock Status Query: (Use "*" The Key Over "P, W" and "+" Indications to ENTER)
# pw + 1234567890 +1 # Provider Lock Status
# PW + 1234567890 +2 # Network Lock Status
# PW + 1234567890 # Country Lock Status
# pw + 1234567890 +4 # SIM Card Lock Status

The Code 1234567890 Must Be Computed With A Program E.g. SmartDCT4Calc and / or DCT 4 CODE CALCULATOR FROM IMEI, ETC ...

Info. To Simlock: Sim Lock Makes It for the Offer / Network Carriers Possible, Subsidized (Verguenstigte) Handys to Offer. Thus One Makes Oneeself If Necessary Punishable If One Sim Lock Deactivated - In Addition The Warranty Can Purged. I Take Over for It NO ADHESION OR RESPONSIBILITY!

SMS Tipps.
01/27/04 To Tipps & Cheat About SMS (With AppRiate Codes) Are Immediately in the Faq List.
For example for the topic: SMS "Retard" and / or Deferred Send, Acknowledgment of Receipt, Reports ...
Mark More Simply
03/01/04 To Tipps & Cheat to the Topic "Mark" E.G. With SMS Entrance.
Over Simply To Mark Simply The "Pin" (ABC KEY) Hold Some E.g. SMS and Move then Jostick Downward.
Call Number Transmission
01/01/04 * 31 # - (CLIR - Calling Line Identification Restriction Switches On for The General Call Number Transmission)
# 31 # - Switch Off The General Call Number TRANSMISSION
# 31 # [Telephone Number] - With the next Call Suppress The Own Call Number (Thus Temporary)
* 31 # [TELEPHONE NUMBER] - WITH THE NEXT CALL TRANSFER OWN CALL NUMBER (THUS TEMPORARY)
# 31 # - Status Query (of Call Number Transmission)
# 31 * [TELEPHONE NUMBER] - OWN CALL NUMBER SHOW, ALTHOUGH RECEIVING STATION SWITCHED CALL NUMBER SUPPRESSION ON. (isn't usually de-energised of the netz (Betreiber).)

* 30 # - Switch (Tie-Clip - Calling Line Identification Presentation for the Announcement On the Call Number of the Caller)
# 30 # - Switch OFF
# 30 # - Status Query

This Also Partly Goes WITH 6600 VIA MEN: Attitudes - Calls - Own No. SEND ...

The Following Codes Are Not Supported by Most Netz (Betreibern):
* # 76 # - Announcement of the Call Number, Under Which One Reached the Calling (Not Its Call Number During Rufumleitung!) (Colp - Coonnected Line Identification Presentation)
* 76 # - Switch ON
# 76 # - SWITCH OFF

* # 77 # - Announcement of the Call Number, Under Which The Caller Reached ME (Not My Call Number During Rufumleitung Meinerseits!) (Colr - Connected Line Identification Restriction)
* 77 # - Switch ON
# 76 # - SWITCH OFF
Call ByPasses (Call Forwarding)
01.01.04 BYPASS Code (U):
U \u003d 21 Always
U \u003d 61 Retards
U \u003d 62 Not Attainable
U \u003d 67 Occupies

U \u003d 61, 62, 67 CAN BE PARALLEL ACTIVE

U \u003d 21 -\u003e And then no more Call Signaling Overwrites U \u003d 61.62 and 67! Service Code (D):

D \u003d 11 ONLY LANGUAGE
D \u003d 12 All Data (Speed \u200b\u200b/ Minutes)
D \u003d 13 Only Fax
D \u003d 14 DATEX J (ACTIVE?)
D \u003d 15 Teletex (Active?)
D \u003d 16 ONLY SMS
D \u003d 18 All Data Except SMS
D \u003d 19 All Services Except SMS
D \u003d 20 All Services

D \u003d 22 ALL SYNCHRONOUS SERVICES

D \u003d 26 Data Pack Exchange on the Left of Inclusive. Pads.
D \u003d 27 Services Thru Pads
D \u003d 29 12 KBPS Digitally Left

** U * [GOAL CALL NUMBER] * D # - BYPASS SWITCH ON
INPUT WITHOUT * D MEANS BYPASS OF ALL SERVICES

## U ** D # - Switch BYPASS OFF (Individual Bypasses and Service Code)
WITHOUT ** D ALL Services Are Switched Off to Bypasses
## 002 # (All Bypasses for All Service Codes SWITCH OFF)
## 004 # (Switch Off Only U \u003d 61, 62, 67 and for All Service Codes - Thus ", Not Attainable, nonacceptance" Occupies)

* # U ** D # - Status of the Bypasses Query:
INPUT WITHOUT ** D Queries All Services and Bypasses

BYPASS IN THE SPEAKING AND / OR FAX BOX: Number in Bypass Procedure WITH D \u003d 11 AND / OR 13 ENTER
Goal Call Number (E.g. D2-Netz: +49,172 XXX) And Handynummer WITHOUT PRESELECTION (IF Necessary 172 Replaces) Enter.

Tap: During Switched on Rufumleitung "With Occupied" Being Able "to Reject" Calls by One The Red Key During "to Ring" Presses. The GOAL CALL Number of the Occupying BYPASS (E.G. Mailbox) (E.G. Mailbox).
Type for Waiting Period During Rufumleitung 61: ** 61 * [GOAL CALL NUMBER] * 11 * [TIME IN SEC. (5 to 30)] #

This Also Partly Goes WITH 6600 VIA MENU: attitudees - rufumleitungen -...
KNOCK / STOPS / PARKS / FAULTS
01/01/04 Knocks Is Signaling A Secondary Call During A Current Discussion
* 43 # - SWITCH ON
# 43 # - Switch OFF
# 43 # - Status Query

This Also Partly Goes WITH 6600 VIA MENU: Attitudes - Calls - Knocking ...

0 - Reject While The Discussion A Knocking
1 - Discussion Terminate, Knocking Discussion Accept
cERTAIN Discussion (Y) Terminate 1 (Y)
2 - Discussion Park, Knocking Discussion Accept
certain Discussion and New Discussion Leads 2 PARKS (Y)

0 - Caller The BUSY CONDITION SIGNAL

This Also Partly Goes With 6600 Via Menus Existing During The Discussion.
Call Barrier.
01/01/04 Possible Only IF Bypass of the Service Code Is Switched Off.
Check Code (s):
S \u003d 33 ALL OUTGOING TRANSMISSIONS
S \u003d 331 OUTGOING ABROAD
S \u003d 332 OUTGOING ABROAD EXCEPT HOME
S \u003d 35 All Arriving Transmissions
S \u003d 351 All Arriving Abroad

Special Check Codes (s) Delete:
Switch Off Only In Connection With The Procedure
S \u003d 330 Check Code Status Outgoing & Arriving Transmissions Switch Off
S \u003d 333 Check Code Status Outgoing Transmissions Switch Off
S \u003d 353 Check Code Status Arriving Transmissions Switch Off SERVICE Code (D):
NOT ALL NETS Support All Services
D \u003d 10 Language and Fax (All Calls)
D \u003d 11 ONLY LANGUAGE
D \u003d 12 All Data (Speed \u200b\u200b/ Minutes)
D \u003d 13 Only Fax
D \u003d 14 DATEX J (ACTIVE?)
D \u003d 15 Teletex (Active?)
D \u003d 16 ONLY SMS
D \u003d 18 All Data Except SMS
D \u003d 19 All Services Except SMS
D \u003d 20 All Services
D \u003d 21 All Asynchronous Services
D \u003d 22 ALL SYNCHRONOUS SERVICES
D \u003d 23 3.1 KHz GSM OF LANGUAGE SERVICES
D \u003d 24 All Synchronous Point Ton of Point Data Inclusive. Pads.
D \u003d 25 Only Data (All Asynchronous Point Ton of Point Data Inclusive. Pads)
D \u003d 26 Data Packet Exchange Links Incl. Pads.
D \u003d 27 Services Thru Pads
D \u003d 29 12 KBPS Digital Link

* S * * D # - Einschalten Der Anruf-Sperere
# S * * D # - Ausschalten Der Anruf-Sperere
* # S # - Status Der Anruf-Sperere Abfragen

Passwort Fur Handy Sperere Andern:
** 03 ** * * #
** 03 * 330 * * * #

Dies Geht Beim 6600 Auch Teilweise Via Menu: Einstellungen - AnRUFSPerre ...
Pin Andern.
01.01.04 ** 04 * * * #
** 042 * * * #

PIN ENTSPERREN: ** 05 * * * #
PIN 2 ENTSPERREN: ** 052 * * * #

Dies Geht Beim 6600 Auch Teilweise Via Menu: Einstellungen - Sicherheit - Telefon Und Sim ...
Diverse Codes.
02.02.04 Die Folgenden Codes Klappen Nur in Einigen (Wenigen) Netzen / Netzbetreibern ... Leider Z.B. Nicht IM Vodafone D2 Netz (in Deutschland):
* # 100 # - EiGene Nummer (Own Number)
* # 101 # - HLR Nummer
# 102 # - Switch Nummer
# 103 # - Zeit Im Netz (Network Time)
# 104 # - AnRUFBEANTWORTER NUMMER (Voice Mailbox Number)
# 105 # - Switch Number
* # 147 # - Letzter Anrufer (Last Caller)

# 646 # - Minutes Used: (646 spells "min")
# 1345 # ор * 174 # - Vodafone Prepaid Balance

* 78 - Do Not Disturb - Nur in Nord America in GSM Und CDMA Netzen Moglich
* 79 - Cancel (S.O.)

Android Secret Codes for Nokia C3

Disclaimer: This information is intended for experienced users. It is not intended for simple users, hackers or mobile thieves. We will not be responsible for using or incorrect use of this information, including data loss or equipment damage. So use these codes at your own risk and benefit.

Code: - * # * # 4636 # * # *
This code can be used to obtain information about your phone and battery. The following 4 menus are displayed on the screen:

* Phone information
* Battery Information
* Battery history
* Use statistics

Code: - * # * # 7780 # * # *
This code can be used to reset the factory settings. He will delete the following things:

* Google account settings that are stored in your phone
* System and Application and Settings
* Uploaded applications

It will not be deleted:

* Current System Software and Related Applications
* SD card files, such as photos, music files etc.

PS: After you enter this code, you will see a window with a proposal to click the "Reset Phone" button. Thus, you get the opportunity to cancel your operation.

Code: - * 2767 * 3855 #
Think before entering this code. This code is used for factory reset. It will delete all files and settings, including internal memory. Also reinstall the phone firmware.

PS: After you enter this code, you will not be able to cancel the operation until you pull the battery from the phone. So think twice before entering this code.

Code: - * # * # 34971539 # * # *
This code is used to obtain information about the phone chamber. Shows the following 4 menus:

* Updating camera firmware in the image (do not touch this option)
* Camera firmware update on SD card
* Get the camera firmware
* Get Firmware Update Counter
A WARNING. Never use the first option, otherwise the camera of your phone will stop working, and you will need to take the phone to the service center to reinstall the camera firmware.

Code: - * # * # 7594 # * # *
This code can be used to change the "Complete Call / Power" button on your phone. By default, if you click a button for a long time, a request screen will appear asking any option from silent mode, flight mode and power off. You can enable direct shutdown by pressing this button so as not to spend time to choose from.

Code: - * # * # 273283 * 255 * 663282 * # * # *
This code opens the file copying screen where you can back up your media files, for example: photos, audio, video and voice memos.

Code: - * # * # 197328640 # * # *
This code can be used to log in to the service mode. You can run different tests and change the settings in the service mode.

WLAN, GPS and Bluetooth Test Codes:
# * # * # * # * # * # 528 # * # * - WLAN TEST (use the "Menu" button to start various tests)

* # * # 232338 # * # * - Shows WiFi Mac Address The MAC address is a unique identifier that is assigned to each unit of network equipment and allows you to identify each point of connection, each network node and deliver data only for correct data transmission and service provision.

* # 1 # 1472365 # * - GPS Test Nokia C3

* # * # 1575 # * # * - Another GPS Test GPS is good primarily by the fact that it is accurate (determines your position with an accuracy of five meters) and absolutely free (good Americans allow you to use our companions to everyone). For specific navigation programs And the cards, of course, have to pay - but this board will be one-time, and there is no subscription to GPS services in nature. The bad GPS is the fact that it works only on the street, and mostly in clear weather - if on the sky is overcast, find the number of satellites is quite difficult for work.

* # * - Bluetooth Test Nokia C3

# * # 232337 # * # - shows the address of the Bluetooth device

* # * # 8255 # * # * - This code can be used to launch GTalk Service Monitor.

Codes for information about the firmware version:
* # * # 4986 * 2650468 # * # * - PDA, Phone, H / w, RFCallDate

# * # 1234 # * - PDA and phone

* # * # 1111 # * - FTA SW VERSion

* # * # 2222 # * - FTA HW VERSion

* # * - PDA, Phone, CSC, Build Time, Changelist Number

Codes for launching various factory tests:

* # * # 0283 # * - Packet Loopback

* # * # * - LCD Test

* # * # * # * # 0289 # * - Melody test

* # * - Device Test (VIBRATION TEST AND BACKLIGHT TEST)

* # * # 2663 # * # * - Touchscreen version

# * # * # 2664 # * # * - Test screen test

* # * # 0588 # * - Proximity Sensor Test

# * # 3264 # * - Ram Version Nokia C3

Standard GSM Codes Nokia C3
These codes are dialed from the phone gSM standard serve to turn on and disconnect various standard functions and services. Some of them duplicate the menu functions, some are not.

Legend:
@ \u003d send button (tube, OK, YES, NAVI)
** \u003d enable or activate
* \u003d active
## \u003d Turn off and deactivate
# \u003d Inactive

Replacement PIN code Nokia C3
Change PIN 1 ** 04 * OldPin1 * Newpin1 * Newpin1 # @
Change PIN 2 ** 042 * OldPin2 * Newpin2 * Newpin2 # @
Unlock PIN 1 ** 05 * PUK * NEPIN1 * NEWPIN1 # @
Unlock PIN 2 ** 052 * PUK2 * NEPIN2 * NEWPIN2 # @

PUK - Code, which must be provided by the operator when buying a phone or connection. In the absence of this code, or tenfold input of the wrong PUK, your phone will be completely blocked!

Show IMEI Nokia C3
Show imei * # 06 # "IMEI" is a unique serial number that is stitched into every GSM phone. IMEI consists of 15 digits. Abbreviation "IMEI" is decrypted as "International Mobile Equipment Identifier" (i.e., the International Mobile Equipment ID).

If the code obtained by entering this command and the code on the back of the phone does not match, then your phone may be "gray".

Nokia C3 call call forwarding
Deactivate all types of redirection ## 002 # @
Deactivate all conditional redirects ## 004 # @
Activate all conditional redirects ** 004 * The phone number # @

Forwarding all calls Nokia C3
Deactivate and disable call forwarding to another number ## 21 # @
Deactivate call forwarding to another number # 21 # @
Set number and activate call forwarding to another number ** 21 * telephone number # @
Activate call forwarding to another number * 21 # @
Check call forwarding status to another number * # 21 # @

Forwarding in the absence of a call to the call
Activate call forwarding to another number If the subscriber does not respond ** 61 * The phone number # @
Deactivate and disable call forwarding If the subscriber does not respond ## 61 # @
Deactivate call forwarding If the subscriber does not respond # 61 # @
Activate call forwarding If the subscriber does not respond * 61 # @
Check call forwarding status If the subscriber does not answer * # 61 # @

Forwarding if the subscriber is outside the coating zone
Activate call forwarding to another number If the subscriber is out of the coverage area ** 62 * The phone number # @
Activate call forwarding If the subscriber is outside the coverage area * 62 # @
Deactivate and disable call forwarding If the subscriber is outside the coverage area ## 62 # @
Deactivate call forwarding If the subscriber is outside the coverage area # 62 # @
Check forwarding status If the subscriber is outside the coverage area * # 62 # @

Forwarding if the phone is busy
Activate call forwarding to another number If the phone is busy ** 67 * The phone number # @
Activate automatic call forwarding if the phone is busy * 67 # @
Deactivate and disable call forwarding if the phone is busy ## 67 # @
Deactivate call forwarding if the phone is busy # 67 # @
Check the status of automatic redirection if the phone is busy * # 67 # @

Setting the number of beeps before activation of forwarding
N \u003d 5-30 (seconds)
Set the number of beeps ** 61 * Roomproofs ** N # @
Cancel the previous setting ## 61 # @

Change Password for Call Prohibit ** 03 * 330 * Avodarol * Name Parental * New parole # @
Activate the prohibition of all outgoing calls ** 33 * Password # @
Deactivate the prohibition of all outgoing calls # 33 * Password # @
Check the status of the prohibition of all outgoing calls * # 33 # @

Ban all calls Nokia C3
Activate the ban of all calls ** 330 * Password # @
Deactivate the ban of all calls # 330 * Password # @
Check the status ban all calls * # 330 * Password # @

Prohibition of all outgoing international calls Nokia C3
Activate the prohibition of all outgoing international calls ** 331 * Password # @
Deactivate the prohibition of all outgoing international calls # 331 * Password # @
Check the status of the ban of all outgoing international calls * # 331 # @

Prohibition of all outgoing calls Nokia C3
Activate the prohibition of all outgoing calls ** 333 * Password # @
Deactivate the prohibition of all outgoing calls # 333 * Password # @
Check the status of the ban of all outgoing calls * # 333 # @

Ban all incoming calls Nokia C3
Activate the prohibition of all incoming calls ** 35 * PW # @ or ** 353 * Password # @
Deactivate the ban of all incoming calls # 35 * PW # @ or ** 353 * Password # @
Check the status of the ban of all incoming calls * # 35 # @ or * # 353 # @

Prohibition of all incoming calls during roaming
Activate the prohibition of all incoming calls during roaming ** 351 * Password # @
Deactivate the ban of all incoming calls during roaming # 351 * password # @
Check the status of the ban of all incoming calls on roaming * # 351 # @
Activate Waiting for Call * 43 # @
Deactivate Waiting for Call # 43 ## @
Check the status of calling the call * # 43 # @

Package or ban sending your phone number when calling
Prohibit the parcel number of your phone # 30 # number_tephone @
Allow the parcel number of your phone * 30 #Tephone number @
Check the status of sending your phone number * # 30 #

Codes for sending / ban definition number for incoming calls
Disable display of caller numbers on your phone * 77 #
Allow displaying the caller numbers on your phone # 77 # @
Check the display status of the caller number on your phone * # 77 # @

Questions and Comments on Secret Codes for Nokia C3

Ask a question regarding the Secret Codes of Nokia C3

Instruction

First of all, the code for resetting the settings is either the firmware zero code. You can get them by contacting the Nokia service center. You can contact it using the contact details on the site. www.nokia.com.. You will need imei - a number located behind the rear lid under the battery. You can also use the search engine in order to find codes that are in free access. Keep in mind that the use of some codes can lead to loss of data stored on a cell phone, so use only those that came from proven sources.

If your attempt failed, reflash the phone. To do this, you will need to synchronize your phone with a computer. Download Drivers and Software from the site www.nokia.com.By choosing your phone model from the list. If the data cable required for flashing is not included in the package, buy it in a cellular store. Connect the phone and make sure that the Software "sees" the phone.

To reflash the phone, you will need a factory firmware responsible for the functioning of the phone, as well as software to perform this operation. Use the fan sites of the company "Nokia" as Alnokia.ru. With their help, you can find not only the necessary software, but also detailed instructions for your phone model. The best option will be the use of a factory firmware that does not contain traces of foreign intervention. Make sure the phone's battery is fully charged, otherwise your mobile can turn off in the middle of the operation. Copy your personal files from your phone to a computer, then update the phone software. When the operation is completed, copy the data back to your mobile.

Sources:

how to remove the defensive code on nokia
2610 asks for a protective code

The phones of the company Nokia provides such a function as a protective code. It is used to protect those data that you consider confidential or just want to hide from unauthorized persons. In case you have forgotten the security code, you can easily unlock it, following a simple instruction.

Instruction

First of all, contact the Nokia company representative office in order for the firmware for resetting and resetting the password for your model. There are many different options for codes on the Internet, but no one will assume if yours deteriorates as a result of the incorrect code entered. In order not to have happened, ask the official letter from the company's representative.

In case you urgently need code, and information does not arrive, reflash the phone. In this case, all the data will be lost, so apply this method only when you all right to wait for a response from Nokia. In order to reflash the phone, you will need to synchronize it with the computer and reflash using special software.

If the step number two is complicated for you, or you have neither time nor the desire to do this, contact the Nokia service center. Regardless, on guarantees your phone or not, you can help with both unlocking and flashing. Do not forget to specify consultants that you want to do - reset the firmware or simply reset the protective code.

Protective code is used in most telephone models, including on Nokia phones. This code is used to maximize the safety of the personal data of the user when the phone is in hand to third parties. But sometimes the owners themselves forget the protective code. In this case, one of the ways can help you with which you can unlock the protective code.

Instruction

First of all, contact the manufacturer, i.e. Nokia in order for you to provide all information on codes to reset the settings and the firmware reset code, as well as on the code to remove the lock. In this case, it all depends on how much you can convince the manufacturer that the phone really belongs to you. Prepare documents confirming the fact of purchase and sale and a commercial check.

After you get these codes, enter them on the keyboard, depending on what exactly you want to do is to erase all personal information and return to the factory settings, just bring down the settings or remove the phone block code.

In case you do not work, reflash the phone. To do this, you will need a date cable with which you will need to connect the phone to the computer. After that reflash the phone using special software and the firmware that download from the Internet. After flashing, you will get a fully clean phone, with the factory configuration of settings and removed by blocking code.

On Nokia cell phones, as well as on the phones of other brands, a protective code is provided for the phone that the foreign person can not use the phone. However, if you have forgotten the code, there is a special utility that allows you to remove the protective code for inclusion.

You will need

- MBRO USB Nokia Tools Lite program.

Instruction

Load from the Internet MBRO USB Nokia Tools Lite. You can find a link to download this program through any search engine - enter the name and press Enter, and then go to the proposed links. You can also find on Softodrom.ru website. Check the downloaded by antivirus files, otherwise you risk the virus to the computer. As a rule, when loading a file, an automatic full check of the file for malicious code or files should occur.

Unpack downloaded files and run the program. Similar software must be installed in the system directory local disk. The main program window consists of an output area of \u200b\u200bmessages and controls located on the right. Connect the phone to the computer by selecting the PC Suite mode. To do this, use MiniUSB cable.

Find the Security Code and click on it with the mouse. The program will display information about, and at the bottom line, followed by the words of the Security Code (New Position) the protective code of your phone will be specified. Check the received code by entering the digit combination into the phone. This method Must be suitable for all Nokia phones running on the BB5 platform. Now remove this code or install such a code that will definitely for sure /

If you have a phone different model, try to find a similar program through the search engine. It is possible to see the defensive code will not work, but you will probably find a utility to remove the code from a mobile phone. There are also some models of phones on which it is impossible to view protective codes. To solve such problems, you need to attribute your phone a specialized center, where they are engaged in fixing or in the sales center, as consultants in many cases help cope with similar problems.

Video on the topic

The phone lock code allows you to protect the device from unauthorized use in case of replacement or loss of the SIM card. This code is entered when the phone is turned on. Sometimes the user may forget this information, so you need to use different ways By definition of blocking code.

Instruction

Take the Blocked Nokia phone to the service center so that the specialists find out the blocking code. However, sometimes there is no time to contact the support service or the phone is needed over time. In these cases, you can independently find out the necessary information using special programs.

Download NSS and Nokia Unlocker software, which will allow you to find out the blocking code on Nokia. Find these applications on the Internet on specialized sites. Before working with programs, check them for viruses and compare control sums.

Install the NSS application on personal Computer. Connect the Nokia phone to the computer by a special USB cable. It should be noted that the device should be turned on. Otherwise, the program will not be able to connect to your Nokia phone.

Run the NSS program. You will receive a query with text: "Please Select From The Following Service Device You Will Be Using After the installations" in which you want to select the "Virtual USB Device" item. Find the magnifying icon in the upper right corner of the program on which SCAN for New Device is written.

Press the "Phohe Info" button, after which in the window that opens to the "SCAN" button. The body side will appear "Phone Imei" and "Phone Version". Select the Permanent Memory tab and check the "To File" lettering, then click the "Read" button. The program will start processing the process. Wait for a while and save the * .pm extension file.

Run the Nokia Unlocker program. Open the path to the saved * .pm file and click the Define button. As a result, the program will give the code for blocking your Nokia phone. Enter it in the query window on the phone screen and unlock it.

Video on the topic

Sources:

lock code nokia phone

Codes on mobile devices of all manufacturers are approximately in the same place. Also, for viewing, there are universal combinations that allow you to view identifiers if you have a phone.

You will need

- Packaging from the phone;
- Documents for phone.

Instruction

To find the IMEI number on your Nokia mobile device, enter a combination of * # 06 # in the phone standby mode, after which its code identifier will appear on the screen containing service information in encrypted form. You can learn more about the structure of this identifier as follows the following link: http://aproject.narod.ru/note/imei.html. You can also view this identifier under the battery of the device on a special sticker, after opening the compartment cover.

If you need to view the identification number of your Nokia mobile device, without having a device in your hands, look carefully the box from this phone, with the side, where the color information is usually prescribed and the sticker with the IMEI number is glued. Also look for this number in the warranty coupon, which in most models is located on last pages instructions.

Never throw away the packaging and phone documentation before the expiration of its operation - they can come in handy in case of loss or theft of a mobile device. There are also special IMEI recorders that allow you to quickly track its location and block mobile device In the case of theft or loss, thereby making your phone useless for thieves, because when installing a SIM card to your phone, an operator will be sent a message with an identifier, after which the calls will be unavailable.

In order to check your phone, use the Introduction of its identifier on the next site:

http://www.numberingplans.com/?page\u003daNalysis&sub\u003dimeinr.

After the analysis, the information will issue you a message with data about your phone based on the information laid in IMEI.

Video on the topic

Helpful advice

Check the phone identifier when buying.

When using Nokia cell phones, you may encounter multiple blocking species. Actions that must be taken to remove it are based on the type of blocking you encountered.

Instruction

Locking under the operator is designed to describe the use of the phone on a network other than the original. Most often you can face it, buying. In this case, you will need to refer to the operator under which the blocking was performed. Provide IMEI- as well as your data that was provided when you buy a mobile phone. If you bought a phone with hands, you will need to contact the original owner to find out this data. Request code. Enter it when you turn on the phone with a "someone else's" SIM card, thus unlocking your mobile.

The second type of blocking, with which you may encounter is blocking the phone directly. In the mobile firms "Nokia", protection is provided for the case of loss or theft of the phone is a protective code that you want to enter when the phone is turned on. To reset it, you will need the firmware zero code or the setting code. Of course, you can use codes that are in open access On the network, but the most reliable option will request them from the official representative of the company in your city or by contacting the contacts posted on the Nokia.com website. Provide the IMEI phone number, as well as its serial number, then request the codes described above.

The SIM card lock is used to protect the subscriber's personal data as its mobile number, notebook and messages contained in the SIM card memory. When you turn on the phone, a PIN code is requested. If you forgot your PIN code and entered it incorrectly more than three times, then you can reset it with a pack code placed on a plastic package from the SIM card. If this option is impossible, you will need to apply to the representation of your cellular operator to replace your SIM card. Provide passport data, after which you will be provided with a new SIM card without changing your phone number.

The security code installed in mobile phones is a tool that prevents unauthorized access to your phone resources. In addition, this code is required to be entered to implement some operations with the phone. If suddenly you have forgotten the code, you can restore it. Consider this situation on the example of the Nokia brand.

Nokia.
* # 746025625 # [* # SIM0Clock #]
# 92702689 # [* # war0Anty #]

service code Nokia 5120 & 5125:
output of the above is another service code
1) * # 639 # (* # new #) serves to add a number that can be prescribed several phone numbers, and switch between them.

2) * # 92772689 # (* # Warranty #)
1) serial number
2) date of release
3) reprogramming date
4) date of last repair.
5) includes data transfer
6) Total conversation time.

3) * # 837 # OR * # Ver # version of the phone (not supported by all models)

4) * # 9999 # OR * # 6120 # version of Softa (not supported by all models)

before changing something in the settings
Think well, can you get back everything in place
Especially in paragraph 1
Change the name of the operator is not possible on all Nokia models in the last models, this chip is blocked by the manufacturer.
the only (almost) plus this service code * # 3001 # 12345 # is the ability to restore the "forgotten" password for the inclusion of mobile.
And the second plus - the level of the received signal is visible.
Nokia 2110.
Show Emei Number * # 06 #\u003e
Show version of phone software * # 9999 #\u003e Or for 2110i * # 170602112302 #\u003e or * # 682371158412125 #\u003e
Show phone production date * # 3283 #\u003e

6110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function. # 3370 #\u003e
To enable EFR * 3370 #\u003e
To reduce the speed of the battery discharge and turn on the HR (Half Rate) function * 4720 #\u003e then turn off and on the phone again.
To enable HR # 4720 #\u003e
To view IMEI numbers * # 06 #\u003e
Show version of Software * # 0000 #\u003e
Log in to a special menu * # 92702689 #\u003e Teams in a special menu:
6232 OK shows the month and year of release
7332 OK shows the date of the last change in the program
7832 OK shows the date of sale (if introduced)
37832 OK You can enter the date of sale MMYY (carefully! Then you can not change)
9268 OK Shows Serial Number (IMEI)

7110
View firmware version * # 0000 #\u003e
View IMEI * # 06 #\u003e
Login to the service menu: * # 92702689 #\u003e Consistently pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2 mm / yy (release date)
3 Purchase date (here you can enter the purchase date if your phone is new. Remember that the date is entered once and if you have improper date, it will be fixed later!
4 repair date (if repaired)
5 Date of transfer to the user? ATTENTION: To exit this mode, you need to turn off and re-enable the device.
SIM-CLOCK STOP Mode Card Support (only for firmware version 5.24 or later) * # 746025625 #\u003e
Enable Enhanced Full Rate Codec (EFR): * 3370 #\u003e will be activated after rebooting the phone (consumes more energy) Disable Enhanced Full Rate Codec (EFR): # 3370 #\u003e and EFR will be disconnected after rebooting the phone
Enable Half Rate Codec: (available only for firmware version 4.33 or earlier) Enter * 4720 #\u003e and Half Rate mode will be enabled after restarting the phone Disconnect Half Rate Codec: Enable Enable # 4720 #\u003e and Half Rate Codec will be deactivated after rebooting the phone

Smartphones

Nokia 6600 Secrets and Other Smartphones

* # 06 # - IMEI smartphone

* # 0000 # - firmware number

* # 7780 # - Restoration of the original (workers) smartphone settings

* # 7370 # - reset the smartphone into the factory settings (all software is removed, catacks, calendar, etc. - the phone becomes clean)

* # 2820 # - Bluetooth code (unique Bluetoth-module address)

* # 7370925538 # - Occup of "Biders" (for 6600 and above - and which there is a "binary").

Safe Mode Power on the phone - "ABC" + "Power Buttion" (in 3650 "ABC" is "Kapandashik")

Pension in SAFE:

1. Turn off the phone
2. Turn "ABC" (and want)
3. Press the inclusion button
4. Dispatch "ABC" to the body of the phone to the phone !!!

And here is another additional way of phomatizing the phone (with the sweats of all data), on that little one if you can't even download the cherished code * # 7370 # or even dying TypeBCY: In the off state, clamping the current key, green for the answer, asterisk and Keys "3". And turn on TYBY, not send keys. Fools will come.