How to remove PIN code on the phone shutdown. How to disable PIN (PIN) SIM card on iPhone. How to remove unlock key on Huawei and Honor: Backup PIN

With the release of Windows 10, it has become available to such a convenient feature as blocking the system using a PIN code. How is Windows 10 blocking on Pina differs from usual? First of all, the fact that the same PIN is put on all user devices and, in the case of the current use of the OS on a single device, all other devices become inaccessible!

This feature gives a very significant advantage compared to the usual blocking, because if the attackers suddenly recognize the usual password, they can immediately access all other user devices. While the leakage of a PIN code cannot help attackers, provided that you are in currently Work in your account.

Another advantage of using a PIN code is that it is easier to log in and easier to remember it, because, unlike complex passwordPIN consists only of digit set. In addition, only with pin can use windows application 10, as the scanner of the eye iris and go to the system using windows feature Hello - with a touch or look, however, it is not necessary to enter a PIN code here, the system itself recognizes and unlocks you.

So how to install PIN on Windows 10? The procedure for its installation is very simple and will not take much time.
In order to enable PIN code in Windows 10, click " Start", Then -" Parameters» - « Accounts ».


Here, select " Input parameters"And in the window, in paragraph" Pin", Click on the" button " Add».


If Windows 10 requests a password from an account, then enter it and click " OK" If you have an account in Microsoft, then type the password from your profile and log.


Several tips for choosing a pin-code:

Do not install simple codes, like 0000, 1234, 01234567 and the like;
- You should not ask an unnecessarily large pin code so as not to spend a lot of time on its introduction;
- Do not use passwords as a PIN code from other accounts, bank accounts, cards and wallets.

How to change or remove PIN-code Windows 10

In order to change the PIN, you must go to the settings " Input parameters"And the section" Pin" click on the " Change».


Here you need to dial an old pin and introduce a new one twice, and click " OK».

There are such situations when the user has forgotten its pin-code on Windows 10, or it disappeared in it. In such cases, the code can always be deleted. To do this, in the "Input parameters" settings in the "PIN-code" section, you must click on the line " I do not remember my pin code».


After that, a dialog box appears, where you will be asked to enter the password to the current account windows records 10:


After a successful password set, you will be asked to set a new PIN code, or click " cancel", After which the mode windows locks 10 on the PIN code you will be disabled. In addition, sometimes the system requires the user to enter a special security code to unlock the protection system, as a rule, this code comes to an additional mailing address, which was specified when registering an account in Microsoft.

It is worth noting that when loading a PC in safe mode, PIN input to the system will not be available, you will need to enter a password from the user account.

Alexander Grishin


With the help of a password, you can protect your data from outside interference. On the other hand, if the phone is asking for a pin-code, but you forgotten it, you can pretty nerves and do not remember it.

If you do not want to use the PIN code, or completely forgot it, we offer you several options for your removal for smartphones Samsung Galaxy.

If you want to remove the PIN code

To do this, you need to open the menu " Settings", Go to the section" Device” -> “Lock screen"And switch" Screen lock"To position" OFF. ". To confirm, you will need to once again enter an existing PIN code (and that is not a fact), after which it will be removed, and it will be possible to use the phone immediately after removing the screen lock.

If you forgot pin-code

Remove the pin from the Samsung phone, and thus unlock it, you can only carry out that all the data will be deleted from the device (otherwise the meaning of the protection of files by the PIN code is simply lost).

To reset, you must turn off the phone, and then press the "Home", "Power" buttons simultaneously and the volume enhancement lever, holding their seconds 10 until the screen turns on.

Next, using the volume control, we find "Wipe Data / Factory", confirm the action using the POWER button, go to the "YES" button, click the confirmation, we find "Wipe Cache Partition", confirm again and wait for the restart of the device.

After these actions, your phone will return to the "box" state.

In the process windows installations 10 On the computer voluntarily / forcibly, you need to come up with a PIN code to log in. Skip or ignore this installation step will not work, but fortunately, an annoying PIN code can be removed later. Although I would not recommend leave a computer without protection if there are kept any important data. But this is a completely separate topic, and today we will find out how to remove PIN and password in Windows 10.

How to remove PIN code in Windows 10

Remove the PIN code in Windows 10, of course, different ways (Although not a fact, we simply do not exclude it). But I will show how I did. You should like this way, because it is simple and understandable.

However, you should recall you once again that, removing the PIN code from the computer, you leave it almost defenseless. And on the other hand, if you are sure that no one except you get access to it, then why not? But it will be possible to save a little time, without entering the PIN code each time when turned on.

Step-by-step instructions, how to remove the PIN code inWindows 10:

We dealt with the PIN code, but another small nuance remained. Now Windows 10 at the start will ask your password from your account. And the password, by the way, is even less pleasant and time and time than the PIN code. Therefore, we will show you further, as in Windows 10, turn off the password when entering the system.

How to disable password in windows 10

Before disconnecting the password in Windows 10, make sure that you have something recorded somewhere or you remember it well. Because if you rarely use a password, you can easily forget it. And then, when it needs it to confirm some settings in Microsoft account, you cannot remember the password. Of course, it will be possible to restore it, but this is too much trouble that no one loves.

Turning off the passwordWindows 10 when entering the system:

  1. To start, click Windows + R. In this case, Windows is a key on the Windows logo key.
  2. In the window that appears, enter the phrase netPlwizTo call the account settings you need.
  3. Directly in the "User Accounts" settings window, remove the checkbox from the checkbox "Require the input of the user name and password."

Next, click OK and restart the computer to make sure everything applies. Oh yes, I almost forgot to apply these settings, you will need to enter your password twice twice to confirm that you are now running a computer.

Personally, I did everything. Almost sure that you too. Now Windows 10 will not be asked to enter a password or pin code when the computer is turned on. If something went wrong with you, write in the comments below, try to figure it out. If you managed to accumulate very much, then use to return the previous state of your operating system.

Have you read until the very end?

Was this article useful?

Well no

What exactly did you not like? The article was incomplete or untruthful?
Write in climmenia and we promise to correct!

In one of the articles of the site more than detail described how to remove Android graphic wrench, and what to do if I forgot the PIN code or does not work the face stroke. This article is just about how to remove the PIN and FaceCntrier on Android.

Pretty frequent problem on the smartphones and tablets android is the oblivion of passwords, PIN codes, a graphic key or not a triggering faces, for those who have arisen this problem Dedicated to this article.

Before you start!

Huge request those who will read this article list what you need to do:

  • Do not panic! More panic less result;
  • Read carefully, not through line;
  • Reread and reread again;
  • Do not regret the time and spend the study of article 30 minutes of your time;
  • If the article referls, then you need to go and read it, even if you are very competent and you know all this;
  • Do as indicated in the article, and not as you are used to.

After reading 99.99% there is a chance that you unlock android device! Ready? Then we went!

Theory of PIN codes on Android

What happens when you create a screen lock on Android in the form of a firecontrol, graphic key, pin-code, password? At the time of creating a lock in Android OS in section / Data / System / Create files and if you delete them, you will again get a unlocked smartphone or tablet!

Method 1 Delete PIN and FaceCntrier on Android (ADB RUN)

To work this method You must remember whether you have enabled USB debugging, if so, then excellent, if not, then this method is not for you!

To remove the PIN code you will need to download and install. last version Programs - ADB RUN.

1. Connect yours Android tablet or smartphone to pc

3. Go to the Unlcok Gesture Key / Pin Key menu

4. Select Metod 3 or Metod 4 unlock method (if root)

5. Restart Android OS on the device (restart)

Android unlocked!

Method 2 Delete PIN and FaceCntrier on Android (via Recovery)

To reset the PIN or FaceCntrier blocking you have to do this:

1. For smartphones Sony, HTC, Nexus will first have to unlock the bootloader if you have not previously done before (in many cases (50/50) after that, the settings will be reset and the device will be unlocked). Unlock is done once on the device.

  • Unlock Bootloader Sony
  • Unlock Bootloader HTC
  • Unlock bootloader nexus
  • Unlock Bootloader Huawei.
  • Unlock Bootloader Xiaomi.

2. After that, you will need to install custom Recovery, naturally before that you will need to search for your recovery on the Internet.

5. Restart Android to normal mode and you will see that it is already unlocked!

Method 3 Delete PIN and FaceControl on Android (Aroma File Manager)

You need to install custom Recovery, download the latest version (ZIP archive) Aroma File Manager and this archive is thrown on the memory card. After that, go to the RECOVERY menu and set AromaFM_XXXXXXX.zip archive.

You will have a similar file manager:

Per do track / Data / System and delete the following files:

  • gesture.key.
  • cm_gesture.key.
  • password.key.
  • personalBackuppin.Key.
  • personalPattern.Key.
  • locksettings.db.
  • locksettings.db-shm.
  • locksettings.db-Wal.

After that restart Android and see that the blocking code is missing.

Method 4 deleting the gesture.key file via TWRP

1 If you have installed TWRP Recovery. (or install ), after which you first android to recovery mode;
2 Next, go to the menu "Advanced» -> « File Manger»;
3 Go along the way:

/ DATA / SYSTEM

4 Delete files:

  • gesture.key.
  • locksettings.db.
  • locksettings.db-Wal.
  • locksettings.db-shm.

Reload Android and no blocking!

Method 5 Delete PIN and FaceCntrier on Android (WIPE)

If a previous methods They did not work, then you should try to reset the device and then delete all your applications and settings (photos, video, music will be saved). How to execute Wipe in detail you can read in the article - reset or wipe on Android. Successful unlocking Android!

Reading time: 4 min

Some people believe that the pin lock is not needed. If you are of these people, then read this article and you will find out how to disable IDU code on the lock screen.

Any phone illustrate the tablet after pressing the power button requires swipe on the screen, that is, spend your finger. After such actions, you fall into the main menu. But some do not like blocking or there are other reasons for this to disable.

Types of lock screens

If you turn off the lock at all, it can lead to some problems. After all, it is not easy so google improves the functions in a locked mode. If you do not like the usual type of unlocking the device, then why not try another?

At the time of writing a standard for Android, the following types of screen locks were:

  • Swipe on the screen - The same traditional unlock method.
  • PIN-code input - highly old methodwhich is fairly protected. The simplest selection of the PIN code here does not work, because after a few unsuccessful trying A timer appears - the new input will be available only after its expiration.
  • Graphic key - Ideal for those who better remember visual information, and not a set of numbers.
  • Fingerprint - The most reliable way to protect the information contained on the smartphone. Dactylocopic sensor is almost impossible to combine.
  • Iris - Its scanning is embedded in Samsung Galaxy S8 and S8 +. In the future, such a method of unlocking will be introduced into other flagship devices.
  • Password entry - The longest unlock method. The password differs from the PIN code in that it may contain letters and other characters.

IN Google Play. You can find many different lock screens to your taste and color. The choice is huge.

Removing the Lock Screen

If you all decided to remove the lock screen, then go to the settings. But I want to warn that this method can not go to each device. The manufacturer of some gadgets just forbade remove the lock screen at all.

Go to the "Security" section

Choose the item "B locking screen"

Here click " Not" or " Absent».

If there is no such item, most likely disable the lock screen is not possible.

What to do if forgot password

In case you forgot your password, it is very sad. Phone unlock without waste data is almost impossible. There is one way, for this you need to enter the password several times correctly. After entering the password is not correct, you will ask you to enter data from Google account, which is tied to the phone.

If this method does not help, it remains only, all data from the phone will be deleted, including the screen lock.