The home button of iPhone 6 and 6s is interchangeable. Unscrew the three screws that secure the speaker
The single and most important button on the iPhone is used almost without interruption. When it fails, you can reconfigure the gadget so that it does not require its operation. But this is a temporary measure, because replacement Home buttons on iPhone 6s will greatly simplify the use of a broken device.
Six users know that the phone button is responsible for:
- unlocking the device with the ability to connect Touch ID technology;
- screen navigation;
- exiting programs and games;
- activation of voice control;
- screenshot;
- reboot.
As you can see, the mechanism, which was supposed to be the main achievement of the manufacturers, has become the most vulnerable point of the Apple gadget. Its design is no different from those installed on Apple's predecessors. There is a key to press, which is attached to the front panel. This is done using a bracket (which is combined with the cable and the panel) and two screws.
Repairing or replacing the Home button on iPhone 6s?
If the Home button mechanism breaks down, you should contact only experienced technicians who will do everything possible to restore its functionality. This is important because the mechanism has a fingerprint scanner connected to the processor.
If you use a non-original spare part, the capabilities of the smartphone will be lost. As a rule, the necessary replacement parts can be ordered from the service center. The most acceptable option is when they are removed from another donor phone.
The average user picks up the device several dozen times. Of these, twice as many clicks are on the home button. From this we can conclude that a common reason for cable breakdowns is that a person handles this part carelessly. Falls, impacts and natural wear and tear cause the device to stick and not respond to pressure.
In such cases, to correct errors you need to replace the Home button of your iPhone 6s.
Professional iPhone 6s home button repair Find a repair shop for your mobile phone It is often also difficult to choose a good hospital. How quickly your device will work properly again will depend on the quality and professionalism of the specialists. In our workshops, you will be replaced with a home button cable for iPhone 6s. and in just 20 minutes! We also issue each client a warranty card for up to three months.
Pedant is one of the few networks where large volumes of wholesale purchases of “Original” class parts are made. Thanks to this policy, pricing for spare parts becomes profitable, which in turn reduces the cost of services.
Apple makes serious technology and is very sensitive to the security and privacy of its customers.
Based on these considerations, almost all components of smartphones, tablets and other Apple equipment have special protection.
The touch button with Touch ID works with the owner's fingerprints and allows you to access encrypted data inside the device.
Therefore, if Home button on iPhone 6/6s stopped working, the best solution will contact the official service center. After all, some functions may not be available after launching with a non-original button.
And whatever the cause of the breakdown (contacts oxidized, mechanical damage, water ingress, etc.), you will no longer be able to use such services as Apple Pay(contactless payment for goods and services through bank terminals and on the Internet) and Touch ID (owner identification by fingerprint). System updates may become unavailable.
You can replace the iPhone 6 Home button cable while preserving the original button so that the specified functionality remains operational.
But all manipulations should be carried out only while maintaining the functionality of the latter.
If the sensor is broken/broken, only a complete replacement is possible.
The iPhone must be turned off before disassembling.
For the work you will need a specialized tool, such as:
- Screen suction cup,
- Screwdriver for Pentalobe screws,
- Small Phillips screwdriver,
- Plastic picks (blades),
- Tweezers.
- First, unscrew the screws on the sides of the Lightining connector. Using a suction cup and a mediator/spatula, the smartphone is opened relative to the upper part (the parts are disassembled from the lower part, where the screws were unscrewed).
- The connection point of the display cables is protected by a special metal casing. After unscrewing the screws with a Phillips screwdriver and removing the casing, you can disconnect the cables. This is done using the same pick or a flat plastic spatula.
- On the detached front panel, the screws of the protective casing of the front camera and speaker are unscrewed. The camera is carefully lifted, the speaker and light sensor are removed (using a plastic tool with a sharp edge).
- The Home button remains. It is held in place by 2 more screws. After unscrewing them, the button is released and the cable is turned off.
- A new button is installed, or the old original one is installed if the cable is damaged. Next, assembly is carried out in reverse order.
Checking the functionality of the Home button At first glance, there is nothing complicated, but all work must be done with extreme care and concentration.
VIDEO INSTRUCTION
Will the non-native Home button on iPhone 6/6s work after replacement?
Apple is serious about creating new devices. And therefore, special key chips are built into most original spare parts and modules, which allows you to check the originality of devices at the hardware level. And it doesn’t matter whether it’s an adapter for headphones or a new Touch ID module.
As soon as the system does not detect the required key, the device will be identified as unsafe, and some or even all of the functions will become unavailable.
The same will happen with the Home button.
The non-native button will only be able to transmit basic commands to control the desktop, but the functionality of the fingerprint sensor will become unavailable (that is, you won’t be able to use Apple Pay or quick fingerprint unlocking).
What to do if, after replacing the Home button on your iPhone, it starts to crunch and crackle, or there is some play?
Many users complain that after the replacement procedure it clicks and iPhone 6/6S button crunches. This may be due primarily to the fact that new element grinds into place.
Owners of brand new smartphones often complain about a similar problem.
Of course, if after some time the button does not stop cracking and crunching, and the effect even intensifies, it is possible that during the assembly process, abrasive (solid particles) got into the contacting parts, which causes such a sound.
If the assembly was carried out by a master, this is a reason to complain about the quality of the work and put pressure on a free rework.
In case of independent work There is no one to complain to, you will have to disassemble the device again and check all the moving joints, perhaps even replace the button again.
Home button cable iPhone phones 6 and iPhone 6 Plus is a common reason for the failure of one of the most popular control elements of the device. It usually fails when the phone is dropped on a hard surface. The cases of modern iPhones are officially non-separable, but the use of special tools and a clear sequence of actions will help to open them without much difficulty, which will allow you to replace the failed component.
So how do you replace the Home button cable on iPhone 6 and iPhone 6 Plus?
1. Unscrew the Pentalobe screws near the Lightining connector:
This procedure can be performed using a specialized set of Pentalobe screwdrivers, which can be ordered online. It is worth noting that all manipulations to disassemble the iPhone and replace certain of its components should be performed only when the phone is turned off.
2. Lift the front panel of the device using a suction cup and a plastic tool with a sharp edge:
This procedure can be performed using the most ordinary suction cup and the most ordinary mediator. Having firmly pressed the suction cup to the front panel of the device, you need to pry it with a pick and open it like the cover of a book.
3. Unscrew the five screws that secure the front panel of the device:
4. Remove the protective metal plate:
5. Disconnect all cables from the front panel of the device and remove it:
6. Unscrew the three screws that secure the speaker:
These screws, manufactured by Phillips, are of a standard design and can be removed with a few standard screwdrivers from a quality tool kit.
7. Remove the protective metal plate:
The unscrewed plate can be removed using tweezers.
8. Raise the front camera of the device and remove the earpiece:
This procedure should be performed as carefully as possible using a plastic tool with a sharp edge.
9. Remove the front camera of the device along with the light sensor:
This procedure should be performed as carefully as possible using a plastic tool with a sharp edge.
10. Unscrew the two screws that secure the Home button:
These screws, manufactured by Phillips, are of a standard design and can be removed with a few standard screwdrivers from a quality tool kit.
11. Remove the protective metal plate:
The unscrewed plate can be removed using tweezers.
12. Disconnect the Home button cable and remove it:
This procedure should be performed as carefully as possible using a plastic tool with a sharp edge.
13. Unscrew the seven screws that secure the screen protective panel button:
These screws, manufactured by Phillips, are of a standard design and can be removed with a few standard screwdrivers from a quality tool kit.
14. Remove the screen protective panel:
This procedure should be performed as carefully as possible using a plastic tool with a sharp edge.
15. Peel off the protective film and remove the Home button cable:
When performing this operation, you should be as careful as possible so as not to damage the components of the device.
16. Replace the Home button cable and assemble the device:
To reassemble the phone, simply follow these steps in reverse order. The Home button cable can be ordered from one of the online stores.
Thus, you can replace the Home button cable on iPhone 6 and iPhone 6 Plus in just a few minutes. These steps must be performed as carefully as possible so as not to damage the components of the device, which will require additional expensive repairs. In order to avoid all possible difficulties, you can turn to EtoService specialists for help.
Apple products are highly reliable and break down less often than products from other brands. However, even the iPhone latest models sometimes you have to take it in for repairs. Often the reason for contacting the service is the failure of the mechanical part of the smartphone. In this case, its owner often has a question; “What to do if the Home button does not work on iPhone 6?” Our experts will help you answer this question. service center, problem solvers with mobile Apple devices quickly and at an affordable price.
Signs of breakdown
The main signs that the Home button is not working correctly and will need to be repaired or replaced are:
- Stop responding to clicks;
- When used, an iPhone part crunches or makes other uncharacteristic sounds;
- Changing the mobility of a button that is wobbly or, conversely, has sunk into the body.
Checking the button
Sometimes the malfunction is almost invisible. And in order to make sure that urgent repair of the Home button on the iPhone 6 and 6 Plus is necessary, it is recommended to carry out a simple functionality test. To do this, just press Home about 10 times. Even one or two lack of response from the smartphone to a press out of ten indicates a problem. Moreover, sometimes the button not only does not work, but also cracks and clicks unusually.
Causes of malfunction
There are several main reasons for the breakdown of one of the most important elements of the iPhone:
- mechanical damage due to falls or impacts;
- liquid entering the leaking housing;
- software glitches;
- contamination of the mechanism;
- failure of such parts as a button cable or smartphone motherboard or defective soldering of contacts, which is a manufacturing defect.
The button, made of plastic, is quite fragile and does not withstand being dropped from a height or contact with sharp surfaces. Because of this, its surface may crack and play may begin. The same cause of malfunction is also characterized by periodic lack of response.
If moisture gets inside as a result of contact with the device with wet hands, getting wet in the rain or falling into water, the button practically stops pressing and creaks a lot. The cause of the malfunction most often lies in oxidized contacts. But, if there was a lot of liquid, damage to the entire iPhone is possible, and in this case, most likely, not only the Home button will need to be replaced and repaired.
The software causes a malfunction in cases where third-party applications were installed on the smartphone or when a new one was installed. operating system and programs were carried out by a non-specialist. And Home pollution can be caused by improper operation of the device. For example, being in a dusty atmosphere or dirty hands of the user.
Repair features
A problem with software is one of the most simple options Home faults. To fix it, you don’t even have to disassemble the iPhone - regular calibration and, possibly, reinstalling the operating system will be enough. Whereas replacing a button, cable, replacing a loose connector and, moreover, problems with motherboard, takes more time, so it will cost more.
Replacing the cable and board
In order to replace a worn-out Home cable on iPhone 6 and 6 Plus, you will have to perform the following steps:
- Prepare the necessary tools: tweezers, a suction cup and a star screwdriver;
- Remove the SIM card and unscrew the fasteners at the end of the smartphone;
- Use a suction cup to lift the screen and remove the display module;
- Open the device and unscrew the screws on the connector plate;
- Disconnect all cables and remove the housing;
- First remove the screws securing the Home button, and then the protective plate;
- Disconnect the cable.
The replacement work will consist of almost the same stages, except for the last two motherboard. At the same time, it is determined that the cause of the malfunction of the Home buttons is precisely this, only the service center specialists. It is impossible to do this yourself, as well as to replace the board, without either experience or the appropriate tools.
Cleaning and lubricating the mechanism
Contaminated as a result of improper use or excessive frequent use The Home button can be cleaned and lubricated using regular alcohol and WD-40 spray. The latter is used for lubrication in industrial production, weapons and aviation industries, and in everyday life it is used to lubricate locks and doors. WD-40 will also help repair your iPhone. To do this, you will need to apply the product to the iPhone button and press several times so that the lubricant penetrates into the gap. It is not recommended to use a lot of the drug, which can get between the sensor and the glass of the device, causing greasy stains to appear.
Cleaning the contact pad, after which the button in most cases does not crunch and responds normally to user actions, is carried out as follows:
- A small amount of alcohol is applied to the Home surface;
- The button is pressed several times;
- After 2–3 minutes, after the alcohol has dried, the functionality of the device is checked.
Replacing the Home button
Completely out of order iPhone button, with visible defects on the surface and the inability to press as a result of water getting inside, requires replacement. In this case, Home can be restored, but the functionality of the fingerprint sensor will most likely be lost, and an error will be displayed when trying to update. In order to avoid new problem After fixing the old one, replacing the Home button on the iPhone 6 should only be carried out at a certified service center
Where can I get my iPhone repaired?
Even considering the relative simplicity of the design of the iPhone 6 and 6 Plus, if a mechanical button breaks, you should not try to fix the problem yourself. Each stage of disassembling and cleaning smartphones, repairing and replacing their parts requires maximum care. Incorrect actions can lead to the final loss of functionality not only of the button, but of the entire device.
Thanks to our many years of experience, the use of equipment necessary for repairs and the availability of original spare parts for Apple smartphones, our technicians will clean and replace the button and other parts, while maintaining the ability to use the fingerprint sensor. At the same time, the quality of work is ensured by a company guarantee, and the repaired iPhone will serve its owner for many years.