Where to insert the headphones into the computer. Self-connecting headphones to a laptop and setting them up. How to Connect Wireless Bluetooth Headphones to Computer

If you spend most of your time in front of a computer monitor, chat with friends or colleagues via Skype, or just want to listen to your favorite songs, then you cannot do without a special headset. A very common question is how to connect headphones with a microphone to a computer. Indeed, at first glance, there is nothing complicated in this process: I connected the plug to the right socket - and everything is ready. Unfortunately, it's not that simple! First, there are several types of headphones. Secondly, you need to choose the right headset for your operating system. Thirdly, most often you cannot do without manual settings. In general, this procedure will require your attention and patience.

Fundamental rules

The first thing to do is to determine if your computer has an audio card. Its usual location is the motherboard or a separate connector in the system unit. If it is absent, then this device need to be purchased, since without it, the headphones will not work. After purchasing a sound device, you need to install the appropriate drivers. By the way, an inexpensive model is quite suitable for communication, the main thing is that it has jack connectors for the necessary headset.

Then you need to carefully read the instructions in order to identify where the headphone jack is. Usually there is a special icon next to each connector. Also, each jack has its own color: the microphone is pink, and the headphones are green.

So how do you connect headphones with a microphone to your computer?

First of all, you need to insert the headphone and microphone connectors into the corresponding jacks on the rear panel. By the way, in new models of computers, the connection is made through the front wall of the system unit. Sometimes after these manipulations the headset starts to work, but in most cases you need to make manual settings... The next stage of the settings will be to check for the presence of a driver for sound card... Each program installs them by default, but the best option would be to install the native software. If you are convinced that special program is on your PC, but the headset still doesn't work, here's what to do. Go to the Recording Devices tab and set the microphone as the default device. In the event that this column is not displayed, then click on the right mouse button and select "Show disabled devices".

If the headset does not respond when connected through the front wall of the system unit, then you need to go to the audio card driver and perform the following actions:

if your PC has an audio driver from "Realtek", then you need to select the "Disable front panel input definitions" function;
if your software is from VIA, then go to the front panel settings and specify AC97 instead of HD Audio.

Connecting different types of headphones

It doesn't matter which headset you use, the main thing is to figure out which jack to connect it to. And, if necessary, choose an adapter that excludes the occurrence of a short circuit and, as a result, a breakdown of the device.

Connection different types sound equipment will be discussed below.

A device with a microphone. This model has two connectors. In order to connect them to a PC, you need to find a jack labeled mic. Another important point: for high-quality operation of the headphones, you need to correctly configure software on the computer. This can be done in such a simple way: select the start window, go to the "Control Panel" and open the "Sound" function. Then open the "Record" window and check if the microphone input is enabled, if not, connect it.
Professional devices. This refers to the headphones that are used in radio stations and television. Its main difference is the plug, which has a diameter of about 6.5 mm. Such devices can be connected to a regular connector, but do not forget to purchase a special adapter. According to experts, such a connector loads the socket very much, which threatens it with failure. There is another way when the adapter can be made by yourself. This requires a plug with a diameter of 3.7 mm and a socket of 6.5 mm, which must be connected using a wire with a copper core.
Old equipment. Headphones that have an old 5 din plug (ONTs-VG) cannot be connected to a PC without an adapter. You can do it yourself. Radio technicians are aware of the fact that similar connectors are located on an old TDS brand headset. And although this technique is outdated, but in terms of sound quality it is not inferior to many modern models. To do this, you need a tool such as an ohmmeter. With its help, you need to check the pinout of the connector contacts: if it is connected between the input and the joint channel of one of the two contacts, you will hear clicks in one. In the event that you have heard characteristic sounds in two channels, then they have a suitable connection. After you have identified the channels that correspond to the stereo jack, start making the adapter. All you need is a regular ONTs-VG connector, which has 5 contacts and a "Jack" plug with a diameter of 3.6 mm.

So we figured out how to connect headphones with a microphone to a computer, no matter what equipment you want to use.

Rear panel connection

A similar headset in recent times is very popular. This fact is explained by the fact that more and more users communicate via Skype and use such equipment to similar programs... Also, these devices help keep in touch with partners in network games. However, there is a problem: they often do not want to work on older PCs that are not equipped with the appropriate female connectors.

How do I connect headphones with microphone to my computer (Windows 7) to the back? First, for this you need to determine whether the system unit has a stereo headset connector. After that, you need to make sure you plug the correct cable into the stereo jack. This guarantees high-quality sound and long-term work devices.

How can this be verified? To do this, you need to carefully look at the plug, it should show 2 black lines. If you did not notice them, then you do not need to connect the device, as a short circuit may occur, which threatens to damage the equipment. If you use ordinary headphones, be sure to buy a special adapter that eliminates the risk of fire. You can buy it at a radio store or make it yourself.

The most suitable option for the rear panel connection is a standard stereo device with a 3.6mm jack cord. In this case, the headset can be connected directly to the green jack of the audio card. If the connectors do not have a color difference, then you can navigate by the Phones icon, which is always located near the desired slot.

Front panel connection

The sockets for sound devices on modern models of system speakers are most often located on the front wall. And this is very convenient, because all the connectors are in plain sight and it is easy to find the one you need.

Before connecting an audio headset to your PC, regardless of the operating system, you need to install software from "Realtek". These are the most popular electronic devices controls that can be found in almost every system unit.

How do I connect headphones with microphone to my computer on the front panel? The procedure is as follows:

First, pay attention to the jacks: the one for the headphones has a corresponding icon next to it. The microphone must be connected to a different connector. As already mentioned, you will see special icons next to the nests. In addition to images, you can distinguish the plugs by color: the headphones are green, and the microphone is pink.
The second step is to launch Realtek, which you will find in the tray. For those who don't know, the tray is the notification area or one of the elements of the toolbar on the desktop. In the window that appears on the right, you will see the jacks for connecting audio devices. Active connectors will be highlighted with a bright shade, and disabled ones will be slightly blurred. To activate them, you need to open the folder with the parameters of the jack connectors, which is located at the top of the menu. After opening it, you get access to their management. Then you need to select the function "Disable the detection of front panel connectors", after which you can determine the jacks to which you want to connect the headphones.
Then you need to connect the microphone. Open "Device Selector" and select the headphone or microphone icon from the list. It is highly recommended to test a new headset, for example on a smartphone. Since there is a risk that you will spend a lot of time connecting faulty audio devices.
Simultaneous connection of headphones and speakers. There is an opinion that they can only be connected to special sockets, but this is not the case. This problem can be solved by using a fairly inexpensive splitter to which you can connect two or more audio devices at once. But before that, make sure that your amplifier can handle this voltage.

Setting up the headset for "Windows 7"

This operating system is very popular in this matter. How do I connect headphones with a microphone to my computer (Windows 7)? Step-by-step instruction as follows:

First, you need to determine the purpose of the jack connector: is it stereo or not. If this is so important to you, plug a suitable stereo plug into the audio jack. The best way- headphones with a "Jack" connector 3.6 mm. In this case, the connection goes directly to the green jack. If you have purchased a professional headset, then you need to make or buy an adapter, because such equipment can damage the audio jack. If the headphones are old, then you also cannot do without an adapter device, which you need to make yourself.
Then you need to configure the software. For this operating system, the driver from Realtek is best suited. After starting it, activate the disconnected connectors. Then, through the "Connector settings" option, check the "Disable front panel connector detection" checkbox. After these manipulations, you will find the jacks to which you need to connect audio devices.
If everything is in order with the software, and the headset still does not work, then you need to follow these steps. Go to your tray folder and open "Recorders" where the default device is the microphone. Otherwise, activate the item "Show disabled devices".
If the headset does not work through the front panel of the system unit, then you need to go into the audio card program and fix something. If your driver is from "Realtek", then you need to select the function "Disable the setting of front panel connectors", and if VIA - go to the settings and specify AC97 instead of HD Audio.

Setting up a headset on Windows XP

Headset configuration varies for different operating systems. But there are several points that you need to follow, regardless of which Windows is installed on your PC. First of all, you need to check if your computer has an audio card. If sound device is missing, you need to purchase and install the appropriate software. If you only need a sound headset for communication, then you can buy a standard, inexpensive model with connectors for sound devices.

Then, based on the identification images or color difference, you need to determine the location of the jacks for audio devices. Then connect the headset and start chatting, listening to music, etc. If the headset does not respond, you need to make settings.

How to connect headphones with a microphone to a computer (Windows XP):

First, you need to set up your microphone. To do this, enter the "Control Panel" and open the item "Sound and Audio Devices", after which you need to open the "Speech" option.
Then through the "Volume" go to "Options" and go to "Properties", where you need to select the item "Microphone".
Check if the microphone is turned on, after which you need to go to the "Recording level" and adjust the sound through the "Settings" item.
After the dialog box appears, you need to select the inscription "Microphone gain". If there are noises or a characteristic whistle, you need to move the device for conversations away from the speaker.
Go back to the Speech tab and test the hardware. Ready!

Setting up a headset on Windows 8

This operating system is relatively new, and therefore incomprehensible to many. It is for this reason that setting up audio devices seems like a daunting task. However, it is not.

How to connect headphones with microphone to your computer (Windows 8):

First, you need to find the appropriate connector for the connector, and you can find it by looking at the special image. If you connect a headset through the back of the system unit, then be guided by the color.
Then you need to go to "Search", for this move the mouse cursor to the upper right corner of the screen. Find the "Sound" option in the context menu and open the "Recording" tab, where you will see active recording devices.
Under these devices, you need to find an empty column on which you should click right click mice. After this action 2 items will open "Show disabled devices" and "Show disconnected devices". They need to be activated, after which you can check the performance of the sound device.

This is the answer to the question of how to connect headphones with a microphone to a computer (Windows 8).

Connection via "bluetooth"

The only model that works with Bluetooth technology is wireless headphones... In addition, you need your PC to have special adapter, which is usually sold in a set with audio equipment.

So how to connect headphones with a microphone to a computer (Windows 7) via bluetooth?

There are 2 types of adapters: external, which connects to the USB port, and internal - it requires the installation of a driver.

To do this, go to the "Windows 7" control panel, find the "Device Manager" column and open it. You will see a list where you need to find the "bluetooth" device. Then activate the adapter on the PC using a utility program. To do this, you can use Blue program soliel, which is suitable for the given operating system. Then, following the instructions in the instructions, connect the headphones. And finally, check if they appear in the list of "bluetooth" devices. Then you can check their performance.

So we figured out how to connect headphones with a microphone to a computer ("Windows 7").

Connection for Skype

Popularity of this service increases every day, as it is a very convenient method of communication. For his normal work you can do without high-speed Internet, but you can't do without sound equipment.

The most popular operating system today is Windows 7. That is why more and more often users have a question: how to connect headphones with a microphone to a computer (Windows 7) for Skype? Step-by-step instruction:

First of all, you need to connect the plugs to the required connectors: the headphones - in green, and the microphone - in pink.
There are wireless audio devices with a radio transmitter that you plug into a USB port. Then you need to turn on the headphones, after which a notification will appear on the monitor that the device is turned on and ready to work. If the set with the equipment contains a disc with special software, then it must be installed and run.
If after this procedure the microphone does not work, then you need to follow these steps. In the control panel, select the item "Recording equipment" and open the tab "Recording". Find the inscription "Microphone" in the list and activate it.
Additional settings can be made in the settings of the Skype program.

So we figured out how to connect headphones with a microphone to a computer for Skype.

Possible problems

Regrettably, but difficulties in the operation of sound equipment arise quite often. The topic forums discuss the most common PC headset problems. And among the questions the leader is "How to connect headphones with a microphone to a computer on Windows 7?" ... And all because annoying problems occur quite often on a PC that runs on the basis of this operating system.

Typical headset problems:

No sound . Solution: check the plugs when purchasing.
The socket is not working. Solution: you need to check the socket, for this, connect working headphones or speakers to it.
Incorrect mixing console settings. Solution: go to the tray, open the "Sound" option and configure it.
The PC does not find a sound device. Solution - go to the "Task Manager", open the "Sound, video and game controllers" tab and click on the "+" sign. If you see a question mark next to a device in the list, then you need to update the audio card software.

Audio output is a separate part to use personal computers and laptops. Some users prefer to use headphones instead of regular speakers, considering this to be the most in a convenient way listening. Connecting a wired headset rarely causes unnecessary questions, but today we will talk about exceptions. How to connect headphones with microphone to single input laptop? This article will help you get acquainted with all the nuances of connecting a headset to a computer.

Headset

Most often, headphones with a microphone have a combo jack. But what if the pins are not aligned, and the device to which the device is connected has only one input?

Types of connectors and jacks

First, let's get acquainted with the main technical differences between the headphones:

Combo jack. It has three contact strips and connects to the combo connector, if your device is equipped with one.
Standard jack. It is a 3.5 mm “plug” with two contact strips. Connected through the green connector.

There may be some problems if you need to connect headphones with a microphone to a laptop with one input. First, let's figure out if you need to use a headset with a built-in microphone at all.

Turning on the device

Is there any need to connect a microphone to a laptop? First you need to make sure that it is not on the laptop:

Click on the speaker icon, which is located in the lower right corner, RMB (right-click), select in context menu See Recording Devices.
Select the gadget built into the camera of your laptop, highlight it with the cursor and click on the "Default" item so that it is always used.
Then open the properties, on the "General" tab, make sure the device is working.
On the “Levels” tab, set the desired gain values, confirm your actions by clicking on the “Ok” button.

Important! If the drivers and the necessary software are installed, the device will work properly. If for some reason you are unable to detect or launch the built-in microphone, or you are dissatisfied with the quality of the sound recording, you can safely start connecting a headset with a built-in device.

Connecting to a laptop

How to connect headphones with microphone to laptop? First you need to carefully examine the laptop panel, which is most often located on the left, right or side. Pay attention to the presence of inputs for connecting devices. There are new combo connectors that solve one of the problems that will be discussed shortly.

Important! Typically, the audio output jack is green, and the microphone jack is pink or red.

We connect a standard headset with a microphone to the combo jack

There are several options for connecting such gadgets to a laptop that has one connector:

Using a special adapter. This option it is considered the best, as it requires the least cost. It does not take up much space and will help to avoid annoying cable clutter.

Important! Do not confuse the adapter with a splitter for two pairs of headphones. The adapter has two colored inputs: green and pink.

External Sound Card. This option will also save you from problems with the sound card, if any. It is a device with the size of a flash drive, to which you can connect headphones and a microphone.

Important! The sound quality during operation of such a device will be very good, but the cost will be three or four times more than that of the same adapter.

The worst case scenario is direct connections. In this case, the microphone will not work.

Can a device equipped with a modern combo jack be connected to a regular laptop input? Without a doubt. For this, there are also special splitters, which are abundantly available on the modern technology market. They are relatively cheap, but for a ridiculous price there is a risk of getting a low-quality product that will break down or simply will not work.

USB cable

Many modern models of devices are equipped with a USB connector. The use of gadgets with such an output provides an easy solution to problems in the absence of standard inputs for a microphone and headphones in a laptop. The cost of such devices will be slightly higher than that of standard ones, but the quality is worth it.

Give preference to only well-known manufacturers with a good reputation. Such measures will help you avoid unexpected problems when connecting to your computer.

These devices require special drivers to be installed.

Important! Before purchasing any gadgets, familiarize yourself with the capabilities of your sound card. Some devices require compatibility.

Using a wireless headset

If you have a little more money than you need to buy standard device, you can purchase a gadget that works with a bluetooth adapter. These devices also easily solve the “single sign-on problem” in your laptop.

For a long time, headphones have become an integral part of everyone's life. modern man... Usually, headphones are worn to listen to music or podcasts on the way to work or school, but what if you need to connect them to an electronic computer at home? If they have a microphone, then communication in Skype will become more comfortable. Fans computer games They will also appreciate the idea, because you can chat with other gamers or dive deeper into the atmosphere of gambling. All in all, you get quite a few benefits. How to connect headphones to a laptop will be discussed in this article.

In headphones, the volume and sound quality are much better

And let's start by getting to know the connectors through which the connection takes place. Each computer has a headphone jack (usually colored green) and a microphone (colored pink). Also recycled is the blue connector, which is called " Line-in”, You can also connect speakers through it. As you already understood, computer headphones have a double wire with two connectors: for headphones and for a microphone. Of course, it is possible to connect the microphone as an independent device. On laptops everything is the same, however, some models may not have a separate microphone jack. This does not mean that you will not be able to use it on a laptop, you just need to purchase a headset that will connect through a single combo jack.

Having figured out how and where to connect the headphones, we will consider what to do if there is no sound after connecting. The point here may be in the sound card drivers, which for some reason were installed incorrectly or out of order. You can check this in the device manager. To go there, right-click on "My Computer" and select "Manage". In the device manager, find the item "Audio outputs and audio inputs", there should be no warning signs, such as an exclamation mark. If they are present, this indicates that the driver is not installed or is not working correctly.

The problem may also be in the sound setting in the Windows system... Be sure to check that the volume is not set to minimum. This can be done by clicking on the speaker icon in the lower right corner of the screen, on the taskbar. Another way is to go through the control panel to "Sound" and adjust the sliders there. There you can also select a device for playing sound or recording speech. These settings may not change after you plug in the headset, so you have to do it manually.

If you want to connect both speakers and headphones at the same time, so that you do not have to constantly disconnect one of these devices, you can connect the speakers through the "Line-in". If there is only one jack, buy a special headphone splitter. This adapter will allow you to connect speakers and a headset through a single input.

For the most cutting edge users, let's take a look at how to connect Bluetooth headphones to a laptop. First, make sure your PC is equipped with a Bluetooth module and the driver for it is installed. This can be done through the "Task Manager", in the item "Bluetooth radios". Now let's move on to connecting the headset. Click on the Bluetooth icon on the right side of the taskbar and select "Add device" from the menu. In the window that opens, you will see a list of all devices available for connection. It remains only to click on the line containing the name of your headphones, and click "Next". The system may ask for a password, in this case, enter the default code: 0000. In case of any problems or errors, you can correct them in the same way, as discussed above, namely through the "Sound" tab in the control panel.

As you can see for yourself, there is nothing difficult in connecting headphones to a computer, however, sometimes the operating system or drivers may not work as we would like, which may cause some difficulties that you now know how to fix. Leave feedback in the comments about whether this article was helpful, and write about your experience setting up audio devices on your computer.

Surely many of us at least once in our life had to connect headphones or a headset to a laptop or personal computer. Oddly enough, sometimes a number of difficulties arise with this, which I would like to clarify in this article. So, today we will talk about how to connect headphones to a PC and laptop - I will provide tips, tricks and detailed instructions on connecting gadgets.

Connector modifications for connection

Connecting headphones to a PC is a simple task, but from time to time certain difficulties can occur, in particular, when configuring equipment. In fact, all types of computers contain a sound card (in fact, get acquainted with the advanced computer technology recommend here :). Perhaps it is integrated into the motherboard, or you can connect to it through a special connector. Be that as it may, you can always connect headphones either through the rear panel, or through the front (if there are certain jacks for this).

Taking a look at the diagram below, you will be able to quickly figure out how to connect headphones to a PC.

The headphone jack is always green, and the microphone jack is pink. Since gadget plugs are similarly marked with the appropriate shades, it is rather difficult to make a mistake and stick them into conflicting inputs. The light green adapter should be inserted into the light green connector, and the pink one should be inserted into the connector of the same shade in the same way. You can insert both a third-party headset and a microphone into the pink connector. As a result, the configuration of the connected equipment begins using special software (in Windows 7, as well as 8 and 10, the configuration must be carried out automatically).

The accessories are connected to the laptop in the same way. The manufacturer has the right to place the connectors on the front panel of the case or on the side.

You may also find that the headphone jacks in your laptop are too tight. This is done in order to extend the period of their operation. So do not be afraid once again that the plug is too tightly inserted into the connector.

Connecting headphones to a computer is a little more complicated. It should be noted that just the connectors of the headset adapted for personal computers are marked with the indicated colors, if the headset has a microphone. The connectors of the other components of the digital device do not differ in any way in color. On the market, for example, you can find a headset that has not 2 plugs, but one and combines discrete contacts for audio channels and a microphone. On it, you can clearly distinguish 3 stripes that serve to separate the contacts. Two contacts act as a servitor for connecting audio channels, and the third for connecting a microphone.

New modifications of laptops are equipped with a combined jack for connecting a dual headset with a single plug.

There is a special marking next to such a connector. If this connector is absent, and 2 default ones are available, then you can always connect such a headset using a special adapter.

Due to these circumstances, it becomes clear how to connect headphones to a PC from a smartphone. If there is a front panel on the system unit, then the headphones are connected according to a similar method: a microphone - to a pink connector, sound channels - to a light green one.

How do I connect headphones with a microphone to my computer?

From now on, you know how to connect your headset to your PC. However, these manipulations are not enough for the gadget to work correctly, although most often this allows you to start working with it immediately, and all subsequent settings are unnecessary. Nevertheless, there are situations when the connected devices are not used, and this requires a number of auxiliary actions from the user.

1. Before you start adjusting the sound in the headset, you need to check them on another gadget (for example, connect them to the corresponding jack on your phone or tablet).

2. If the headphones do not work correctly, it means that there are no corresponding drivers on the PC. To find them in the bowels of the operating system, play one of the audio or video files. If there is sound in the speakers, then the drivers are ok and you only need to make slight adjustments to their configuration.

3. If it turns out that the drivers are missing, you need to open the computer control panel and select the "Device Manager" option.

4. When this is done, find the line " Audio videos and gaming devices ". If there is an exclamation mark next to it, then it's time to start updating the drivers. Before installing the driver, you should have a CD with the appropriate applications in front of you. As soon as the software is installed, the sound will appear immediately, in theory. If you do not have such a disk, give preference to the option for detecting software on the network, and only after that install the detected elements.

6. You can also test the volume indicator using the Control Panel snap-in. To do this, go into it, find the item "Sound" and click on the line "Adjust the volume".

7. Make sure that the sound is reproduced on the staff, you have the right to check the volume controls. If, after the file is turned on, its playback is unavailable, then the regulator will not display the ripple.

How to connect headphones to PC in Windows 10 / 8.1 / 8/7?

Before proceeding with setting up headphones on a Windows-based PC, you need to connect them to the front or rear panel system unit into specific slots. After that, it's worth starting the audio file. If the file sounds through the headphones, the connection was successful. If there is no sound, follow the instructions below:

2. After that, mark the line "Playback devices" in the opened snap-in.

3. In a new form that opens, you will see a list of devices that are available in your hardware configuration. The list of them can be from one to a whole series (it all depends on what type of device will be used to launch). It is worth making sure that a light green bird is displayed next to the "Headphones" option.

4. If there is no check mark, select this device, right-click on it and select the "Use by default" option in the pop-up form.

5. At the next iteration, it is worth checking the "Speakers" option and clicking on the "Configure" menu item located in the lower left part of the screen.

6. Next, mark the audio channels "Stereo" and click on the item "Check". Testing will start, in its process you should hear the sound from the channels that you can see on the display. If you hear a sound, click on the "Next" button.

7. When the setting is initialized, place the checkbox next to the "Left and Right Front" line, and then click on the "Next" and "Finish" buttons.

8. In the list of playback devices next to the item "Speakers" there is a pulse indicator. When sound file starts playing, the indicator fills with a green tint. If this behavior of the impulse scale is not observed, it is worth looking for another explanation.

9. If the volume is set to zero, even if there is a ripple on the scale, there may still be no sound. In this case, turn the volume slider to a higher level.

10. Nevertheless, if the volume indicator is set at the proper level, and there is an indication by which you can judge that audio playback is active, and the headphones still do not turn on, then either you have a faulty headset or you connected it to the wrong one. nest.

Wireless technologies have long been included in our lives, replacing not always convenient cable connections. It is difficult to overestimate the merits of such a connection - it is both freedom of action, and fast switching between devices, and the ability to "hang" several gadgets on one adapter. Today we'll talk about wireless headphones, or rather, how to connect them to a computer.

Most modern models of wireless headphones come with Bluetooth or a radio module in the kit, and their connection is reduced to a number of simple manipulations. If the model is old or designed to work with built-in adapters, then here you will have to take a number of additional steps.

Option 1: Connection via the complete module

In this case, we will use the adapter that comes with the headphones and may look like a box with a 3.5 mm mini jack plug or a small device with a USB connector.

We connect the adapter to the computer and, if required, turn on the headphones. One of the cups should have an indicator indicating that the connection has occurred.
Next, you need to programmatically connect the device to the system. To do this, go to the menu "Start" and in the search bar we start to write the word "Bluetooth"... Several links will appear in the window, including the one we need.
After the performed actions will open Add Device Wizard... At this stage, you need to enable pairing. Most often, this is done by holding down the power button on the headphones for a few seconds. In your case, it may be different - read the instructions for the gadget.
We are waiting for the appearance of a new device in the list, select it and click "Further".
Upon completion "Master" will inform you that the device has been successfully added to the computer, after which you can close it.
Go to "Control Panel".
Moving on to the applet "Devices and Printers".
We find our headphones (by name), click on the RMB icon and select the item "Bluetooth Operations".
Next comes automatic search services required for the normal operation of the device.
At the end of the search, click "Listen to music" and wait until the inscription appears "Bluetooth connection established".
Ready. Now you can use headphones, including those with a built-in microphone.

Option 2: Connecting headphones without a module

This option implies the presence of a built-in adapter, which is observed on some motherboards or laptops. To check, just go to "Device Manager" v "Control panels" and find a branch "Bluetooth"... If not, then there is no adapter.

If it is not there, then it will be necessary to purchase a universal module in the store. It looks, as mentioned above, like a small device with a USB connector.

Usually a driver disc is included in the package. If it is not there, then, perhaps, additional software for connecting specific device not required. Otherwise, you will have to search for a driver on the network in manual or automatic mode.

Manual mode - search for a driver on the manufacturer's official website. Below is an example with a device from Asus.

Automatic search is carried out directly from "Device Manager".

Further actions will be exactly the same as in the case of the complete module.

Conclusion

Modern equipment manufacturers are doing everything they can to make it easier to work with their products. Connecting bluetooth headphones or a headset to a computer is a fairly simple operation and after reading this article it will definitely not cause difficulties even for an inexperienced user.