How to increase the volume on Android through the engineering menu? A simple way to control sound level in the phone. Increase the volume of the ringtone using the SIMPLE EQ equalizer

It happens that the manufacturer of a smartphone or tablet on Android has not adjusted the volume of the sound, it lacks it in a noisy place. And then the consumer decides to dig in the settings itself, to explore all the possibilities to increase the sound. This will be discussed. To increase the lodge, you can use the standard device settings or engineering menu

Volume adjustment on the device with Android through the basic settings

Standard sound adjustment means in android

To adjust the volume call signal Or while playing music, the sound is regulated by "arrows" - two side buttons.

The second way is system settings Sound. Give the "Settings - Sound" command. Configure the call signal, adjust the volume in the Android system, customize the sounds of the screen workflows - the main thing is here.

How to get into the engineering menu to set the ringtone volume on the phone

For "Gourmet-connoisseurs" of high-quality sound, an engineering menu is available. Make the following.

The list of commands for entering the engineering menu in different brands of smartphones and tablets are attached.

After a set of the command, the engineering menu opens.

In it and configure the sound parameters on the device.

Setting all the sound parameters for headphones or speakers using the engineering menu

So, open the Audio submenu in engineering menu Android.

With him something to work.

Android Engineering Menu Sound Submenu

Before climbing in the settings, check yourself on the knowledge of the parameters from the list of the list.

• NORMAL MODE - normal mode, without connecting any accessories (headphones, etc.).
• HEADSET MODE - External acoustics (amplifier with speakers or headphones) is connected to the smartphone or tablet.
• Loudspeaker Mode - normal mode, working with speakerphone.
• Headset-Loudspeaker Mode - speakerphone When telephone conversation with connected exterior acoustics.
• Speech Enhancement - telephone call without connecting external acoustics.
• Speech Logger and Audio Logger are system drivers that provide configuration drivers. Their adjustment will affect the quality of the recorded sound. For recording telephone conversations It is better to use third-party programs for Android: "Call Record", "Call Recorder", " Total Recall CR ", etc. - and not" wise "with these parameters.
• Debug Info - Collect information about debugging sound parameters. Valuable for developers, but useless to the consumer.

Thin settings for tablet or smartphone

Setting specific values, you can adjust the sound on your smartphone or tablet in your own preference: to get to quiet or add to the maximum value. Sign in any of the above modes and set preferred values.

For example, the Normal Mode mode is taken - play music or video in the standby mode of incoming calls without external acoustics. Outgoing calls are not performed. Make the following.

1. Enter the submenu of this mode - the screen with fields for entering values \u200b\u200bwill appear.
2. Select the type of use sound Driver Android (without him the gadget would be "dumb").

   Here SIP is Internet calls, MIC - Microphone setting, SPH (1/2) - Conversational speakers, SID - Repeat itself in dynamics instead of the interlocutor, Media - sound of music and cinema from your library, Ring - call melodies and sound alerts , FMR radio (if there is FM radio on the device).

3. By selecting the Type of Sound Settings, select the levels (they are adjusted by the volume buttons).
4. Set for each level your numeric value (0-255 units) before proceeding to the next one. To save, press the SET key ("Install").
5. Special attention is paid to the value of the maximum volume. It is one for all volume levels. Do not enter different levels at different levels - such settings simply will not be saved.
6. Similarly, adjust each parameter, go through all available.

Ready! The new settings will already be output from the engineering menu and restart the smartphone or tablet.

Attention! Do not set the volume values \u200b\u200bat which the speakers, headphones or the built-in spoken mini speaker will issue a "hoarse" or "husky" sound.

Working with the engineering menu is completed. To learn more detail - see this video on setting the sound in the engineering menu.

Video: Setting the volume level in android

How to change the volume using third-party applications

When setting up a sound on a gadget with third-party programs For Android, do not install the maximum volume immediately - you can "catch" the program crash or damage too loud sound one of the device speakers.

How to configure sound in speakers through the VOLUME + program

The app is free.

1. Download, install and run VOLUME + application
2. In the settings of the VOLUME + application, select Speaker Settings (Main Speaker) or Headset Settings.
3. Enable Virtual Room Effect (Virtual Room Effect) and Speaker Modifications.
4. Set the sound level (option VOLUME LEVEL), starting with a strengthening per unit.
5. If it comes to improving the sound of music and video - go to the Bass Enhance enhancement and virtual room effects (Virtual Room). Set similarly to sound levels. Turn on some song from your library to feel the difference in sound with new settings.

Important! Do not turn on the maximum values \u200b\u200bimmediately - an electronic chip sound card Either the speaker of the smartphone or tablet may simply burn. Improve the gain gradually. This applies to all applications for amplifying sound on Android gadgets.

Congratulations! You set up the optimal sound on your gadget. Working with the VOLUME + application is completed.

Working with sound in the VOLUME BOOSTER + application

The Volume Booster Plus application will be easier. It analyzes the sound settings, previously made using the engineering menu, and tries to improve them. The application has only the Boost button ("Strengthen" by pressing the improvement algorithm in this program launches.

Unfortunately, there are no extended settings in Volume Booster Plus - as in the same Volume +. There is no at least the main menu. The developer warns that the quality of the sound may not be at the height, and the volume may be too overestimated.

Other applications for sound optimization on gadgets with Android

Their not one dozen is android applications Bass Volume Booster, AudioManager Pro, Volume Ace, Equalizer + Music Amplifier, etc.

We use other ways to add sound on the device

Think, why do you need such a loud sound on the gadget? Maybe better to get good wireless headphones for two? Or connect to the gadget FM modulator - and get a mobile phone with the radio function? No one best Smartphone or the tablet will not replace you with external acoustics - automotive or domestic speakers, as well as modern music Center Either the magnetic "with the entire parade".

• In Chinese stores (for example, in Aliexpress), a huge number of models of flat and compact columns are sold. All of them are equipped with an internal amplifier with a power up to several watts (active columns).
• External sound card, possessing high quality amplifier and equalizer, consumes a lot of energy. If the nutrition comes from microUSB on a smartphone or tablet (there are also such) - the battery "sees" very quickly. We need a separate power source.
• Wireless solutions based on external amplifiers. The sound is usually transmitted by Bluetooth. And also need external (extra) nutrition.
• Special covers and supports capable of overset sound - they create a feeling of greater volume, according to the laws of physics of sound signals.

Is it possible to remove the volume limit

Depending on how to count. If you need to set the sound, say, 25% more is not a problem. Applications with PlayMarket and the capabilities of the engineering menu it will provide. Manufacturers, reinsurance, set the maximum volume in secret (engineering) settings, somewhat smaller than the audio device and / or speakers can "pull" the buyers to the factory marriage, because modern acoustics should not "hoarse", nor "want" .

If you even try to ignitely "unscrew" the volume, getting it or creating such an Android application - that the "wheezes" of the modification will accumulate, overlap on each other and the sound will turn into a little distinguishable and useless noise, from which you hardly hear. Everything is good in moderation. Audio device, whatever it, will not give you to exceed the power to which it is calculated (according to the law of energy sufficiency). Do not try to "deceive nature" - in the worst case you just "smell". This is a very rare case when software settings You can physically oppose your "friend." A smartphone or tablet, alas, in itself is still too weak in front of your overestimated "sound appetite."

In general, enhance the sound in the areas that give you the official Google applications, Android engineering menu, exterior acoustics and special accessories.

Video: Total Volume application to optimize sound on Android

Strengthening sound on smartphones and tablets with Android - not quite a useless task. Somewhat large than first, the volume, competently and with the mind adjusted, will bring additional convenience. If you listen to music or watch movies on a gadget in headphones - thin tuning Sound will also help: it will be much more pleasant. Excellent pastime!

Consider several effective ways Increase the volume on android through the engineering menu.

The creators of this operating system have provided several modes of sound signals at once.

The volume of each of the signals depends on the connected device, the task running or from the phone use situation.

For example, the sound on the smartphone can be muted, and when the headset is turned on, the volume can increase dramatically.

If you faced similar inaccuracies in sound, We advise you to conduct engineering volume setting. This method It implies a more complex process of setting, however, even beginners will be able to master it. the main thing - Perform all stages of instructions in order.

Standard method setting

Android smartphone sound volume regulated by the system for each task separately:

• Incoming calls;
• Recording voice or conversation with another subscriber;
• Sound systems;
• Reproduction of media files.

Note! For all gadgets with a MTC processor of any generation, a single code is valid - *#*#54298#*#* Or combination * # * # 3646633 # * # *.

Log in with a third-party

If you can't go to the engineering menu using the first way or you simply not our code for your gadget, Use third-party utility - A program that automatically connects to the engineering menu and allows you to change the configuration of the smartphone through your interface.

One of the most reliable and popular utilities for working with the secret menu is MTK Engineering Mode.. It can be downloaded and installed on your gadget completely free.

Also, you can choose any other program to work with engineering settings by entering the "Engineering Mode" to search in the store.

For start secret Menu Just open the application. No additional codes are needed to enter any additional information.

Consequences setting

Sound problems may occur absolutely on any phone or tablet.

The reasons for their appearance and the nature of the manifestation of the problem can be expressed in different ways, but the ways to eliminate the malfunction are always the same.

The software envelope implies the identical configuration of the sound card for smartphones from different manufacturers.

Differences can only be found in different versions Firmware or if your device is running a custom manufacturer's castener based on android (for example, Flyme OS).

Each user should understand that the engineering menu configuration does not help sound at the same level as expensive devices.

At the same time, changing the menu configuration allows you to eliminate all the sounds in the sound and eliminate the noises that appear.

The setting of all parameters of the engineering menu "Maximum" does not give warranty best quality Sound. On the contrary, this setting can significantly spoil the gadget and cause hardware problems with speakers. This is due to the fact that the sound begins to play on frequencies that cannot use speaker.

As a result incorrect setting, noise may occur when playing or recording sound, as well as wheezing, hum.

Volume increasing

After successfully launching the engineering menu on your gadget, you can go to an increase in the volume of the phone. Perform all instructions strictly according to each article.

Otherwise, the quality of playback may worsen.

Immediately after opening the menu, read its interface.

The main window has several tabs, each of which is responsible for global settings (testing hardware components, work with software shell and so on).

D. for moving between tabs, use the swipe "right-left".

Follow the instructions:

1 Go to the masonry "Hardware Testing";

2 Click on the item "Audio";

3 The window that opens appears the list of all modes that are available for configuration on your device. - normal mode, conversational and hearing speaker, notifications, etc.. Click on the desired parameter (the value of each option is indicated in the next section of the article);

4 In the window that opens, click on the field Type and in the list that appears, select the desired field ( SIP. - for settings cellular communication and Internet connections MIC - to determine the sensitivity of the microphone, Sph - to set the speaker settings, Sph 2 - second speaker, SID - reflection of sound or echo, better not to change this field, Media - Magnifier volume mode, Ring - the volume of call and notifications, FMR. - radio mode);

5 in the next field Level. Set the volume level (we recommend clicking first to zero and check the changed sound - so regenerate to the most suitable level of playback);

6 The next step you need to configure the value for the selected volume level. Enter it in the field Value iS. (default volume). Range of values \u200b\u200bcan be any number from 0 to 255. We advise you to set averaged value;

7 Similarly, enter the number in the field. Max Vol. . - Maximum volume. To save the settings, click on the keys « SET. » ;

8 Slip Value iS. and Max Vol. For the remaining volume levels. Remember Each level is one of your press. On the increasing / decrease key. It is important that the transition of changes to the sound was as smooth as possible.

All other tabs of the engineering menu are configured equally and have the same parameters.

Decoding the values \u200b\u200bof the modes

Each volume adjustment mode in the engineering menu has its purpose:

• Normal Mode. - general configurations;
• Headset Mode. - the mode of the connected headset;
• Loudspeaker Mode. - Speakerphone;
• Speech Logger. - conversational logs;
• Headset_loudspeaker Mode. - loud connection + headset;
• Speech Enhancement - conversation on the cellular network;
• Audio Logger. - sound recording;
• Debug Ingo - Debug.

Thematic videos:

Every smartphone owner with operating system Android ("Android") probably more than once came across the inconsistency of the sound volume in different options of the device or the problem of too quiet speakers, even in the maximum volume mode. This becomes unpleasant when the sound does not turn out to be increased even through the settings of the phone. However, there are other ways, such as using the engineering menu. An increase in volume in this case is not difficult.

How the sound is regulated on the phones and tablets under Android OS ("Android")

The developers were laid in the Android OS, the differing volume modes intended for different situations of the use of the smartphone, which depend on the connected devices. Thus, without a headset, the sound on the phone can be quiet, and when the headphones are connected, sharply stun the melody of the incoming call. It is to eliminate such misunderstandings that need to customize the sound and change the volume with hidden methods.

How to change the volume of the alarm clock, rington, music and video through the settings

Adjusting the sound on the smartphone with Android OS is possible by the buttons on its enclosure, as well as through the internal settings standard Menu. Methods for adjustment are the same for smartphones and tablets, so you can easily figure out the functionality.

Go to the device settings and select Sounds and Notifications.
Select "Sounds and Notifications"

Depending on the system version, you need to either click on the gear opposite the active mode, or open the "Volume" subsection. If you are afraid of losing regular settings, you can add a new mode.
Click on the gear opposite the active mode

In the window that opens, depending on the system version, the following volume changes will be available to you:

for music, video, games and other media files;

for calls and notifications;

for alarm clock.

Debue the settings to provide all possible situations and prevent unexpected explosive sounds when calling a call or alarm.

All items that can be changed through standard settings will be in the window.

Another reason is too loud or insufficiently quiet call may be installed melodies. Standard sounds Usually aligned on the volume, but they can meet those beginning of which consists of bright sharp sounds, unlike others, where the sound is growing slowly and gradually.

In the Sound Settings, open the Ringtone item.
Silent call melody - one of possible causeswhich you may not hear the phone call

Listen to the proposed melodies and select the most appropriate.
To listen to the melody, click on it with your finger

In the same way, adjust the notification volume settings by visiting the appropriate section of the sound menu.
By analogy with the choice of ringtone, configure the sounds of notifications.

Check out other parameters and think if you will not interfere with such sounds like: key signals when you set the numbers, the sounds of clicking on the screen and blocking it.
Mark only the sounds you need or install vibration

You can quickly change the sound level with the buttons on the smartphone or tablet case.Manufacturers specifically take these buttons to the case so that you can not looking at find them and increase or decrease the sound. However, in this mode of settings very little.

Adjust the volume can be ordinary icon on the phone case

When you press the volume buttons up or down, the corresponding sliders on the device screen will be displayed.

Some models from this screen can go to detailed settings If you click on the corresponding icon to the right of the volume slider.

Some devices displays a special button designed to go to the settings.

Sometimes the smartphone spontaneously goes into a silent or quiet mode, without visible causes. Most often it happens to samsung devices, HTC and Lenovo. Such a situation may arise when changing the profile of sound with a quiet to loud, after which it follows outgoing call. When the call is completed, new profile It may be lost, and the gadget will mistakenly restore the previous one. The solution will reboot the device after changing the sound profile. This problem is associated with bugs in the firmware version and is usually eliminated by developers with update output.

Increase volume through the engineering menu

You can spend more flexible setting of sound if you get to the Andoid engineering menu. However, this section of the device is not so easy. The developers specifically hid it from the eyes of ordinary users so that they could not bring down the settings and disrupt their device.

But for the owners of smartphones, seeking everything to understand and thoroughly study the work of their device, the possibility of access to such settings is a real gift.

Do not forget that the mindless change in the parameters in the engineering menu can lead to a violation of the performance of the gadget.

Before changing anything, you need to read all the available information on this item, compare with how it looks on your device, think about how to quickly return everything back in the event of an unforeseen behavior of the gadget. Only if you are confident in your own actions, you can start settings. It is best if before you make changes, you will make a screenshot of the screen or rewrite the source values \u200b\u200bin the notebook to be able to restore them back.

Opening the menu through the call

To enter the engineering settings menu, special efforts and root are not required. The entry in the menu is carried out through the dialing interface by the Special Code.

Access codes for engineering menu have different devices, as they are installed by the manufacturer, and not the system. All of them will be presented in the table just below.

You need to type the login code into the engineering menu, as well as the usual phone number. The engineering menu is usually opened independently after the set of the last code symbol. If this happens, press the "Call" key.

Try different options if the first did not come

Table: Access Codes

Opening the menu through the application

If none of the codes come to you, try download from Play Market. special utilitywhich will create a separate shortcut for switching to the engineering menu.

Open the Play Market and enter the "ENGINEER MODE" in the search bar and select the first attached application.
All applications for entering the engineering menu are the same, so you can choose any

Install and run the application.
The application will weigh quite a little and the installation will not take much time

You will either automatically send to the engineering menu, or you have to clarify the manufacturer of your device (or processor).
In some cases, you will need to refine the manufacturer of your device.

Volume Increase: Step-by-step instructions

First of all, you need to open the Audio section. If it is not available initially, make several swipes to the left to open the Hardware Testing tab.
Open the AUDIO section in the Hardware Testing tab

Now you will see a list of modes available for change, you need to choose one of the proposed.

The values \u200b\u200bof all modes are described in the table below.

Now select a parameter to change in the Type section.
The values \u200b\u200bof all sound parameters are described in the table below.

Select the volume level that you want to configure. Total 7 (from 0 to 6). These are the same levels that are installed in the standard smartphone settings (when you press the zoom button or decrease the volume on the smartphone housing, the level is changed). It is best to start with zero and last levels.

First adjust the first and last levels.

Now you need to set the volume of the selected level (Value IS) and press SET.

Set the volume enhancement and confirm the change.

Similarly, you need to set the volume limit (Max Vol.). This is the maximum possible volume.
Set the volume limit of the selected level and press SET

In accordance with the values \u200b\u200bset, set the remaining levels so that the volume changes through the buttons is the most smooth.
Calculate the volume levels on the calculator and configure the missing

Similarly, adjust the remaining parameters and volume modes if they are interested.

Table: Mode values \u200b\u200bfor spoken speaker, headphones and microphone

Table: description of audio parameters

Video: How to raise the volume through the engineering menu

How to increase volume through applications

In addition to standard settings and system engineering menu, there are special programsthat allow you to make additional changes In the sound parameters of the smartphone or tablet. Different programs They work correctly not on all devices, because they interfere with the usual functioning of the phone, and this is not welcomed by manufacturers. All of the following programs are available in Play Market.

You should also understand that such editing services for any restrictions of the smartphone are not available to change in normal ways can entail a violation of the gadget and ultimately worsen its performance.

VOLUME + (the most reliable application)

This application is available only on english languageBut it is the least conflict and almost unable to cause sad consequences for your smartphone.

Find VOLUME + in Play Market and install it.
The paid version of the Volume + to download is meaningless

Run the application and select "Speaker Settings".
Volume + has many features, but many of them do not need

The next screen will contain a list of available parameters. First, check Speaker Modifications (Changing the Speaker Parameters) and Virtual Room Effect (Virtual Space Effect).
Check Speaker Modifications and Virtual Room Effect

Then increase the VOLUME LEVEL, BASS Encance and Virtual Room on one division (it will slightly increase the volume).
Increase the marked parameters to one division and check the effect.

Check the changes in practice and change the settings again if there is a need.

A sharp increase in parameters can cause rolling, malfunctions and other troubles in the device.

Jetaudio (Equalizer and Effect Setting)

JET AUDIO refers to the category of equalizers and is a very functional program: it has an audio converter, player and ripper. Equalizer is just one of its options. Standard sound mode that it uses - Normal Mode.

Find Jetaudio in Play Market and install it.
Jetaudio can be called a player or equalizer, but this is the same program

Press the button in the upper right corner to open the settings drop-down menu.
If the Equalizer button is available from the main screen, click on it

Select "Sound Effects ...".
If the "Sound Effects ..." button is missing, find the equalizer through the "Settings"

Now open the "Equalizer".
The remaining buttons can also be useful for you, especially the audio amplifier

You can safely experiment on this tab with all the values \u200b\u200bwithout fearing to harm the device. If you press the button in the upper right corner, a list of additional sewn programs for changing audio settings will open.
All changes made can be very simple to return back

The parameter with the value of 60 Hz must be left unchanged.

Do not forget that increasing the volume of the sound, you lose in its quality, since not all models of smartphones and tablets are designed for good melodies. Part of the devices has weak speakers, excessive load on which will cause wheezing and outsided sounds. Do not bring the speaker to combustion and take care of your gadget.

Volume Booster Plus (Automatic Sound Setup)

The program is available in the store. play applications Market and is the easiest to use.

Volume Booster Plus is the easiest to use sound control program.

After installing and running the application, you will see only one button on which you need to click.

After clicking on the button in Volume Booster Plus, automatic optimization of volume parameters will begin.

Ways to strengthen the speaker with infirred means

There are several cunning tricks that will help to increase the volume of the sound on your device is very simple. To do this, you will need only scribe materials and minimal knowledge of physics laws.

Connect the external speakers or columns to the smartphone. Almost any external sound playback device will be better than the speaker built into the smartphone. First, because it is more in size and has greater power. And secondly, the manufacturers of gadgets often save on speakers, establishing low-power, as users usually prefer to use their own speakers and headphones.

Place your device in a glass glass to enhance the sound when listening to music. Many gadget owners have already trigted this method, despite the fact that it seems stupid. The glass works as a resonator, reflecting the sound wave. Some of the owners of smartphones are cut out of paper cups and attach to the dynamics of the gadget. To add the volume of the alarm ring, especially witty users put the phone on a saucer with a coin and parallel with the call include vibration mode.

Take advantage of the acoustic properties of materials external worldwhich can reflect sound. Find nearby the painted wall and set the phone so that the speakers are directed to it. The sound will reflect the enhancement. Experiment with other similar materials.

How to remove the limit of the maximum sound level

Manufacturers of smartphones and tablets often establish a software limit on changing the volume parameters. That is, the interface can be installed one level of sound, and in fact, the gadget will make sounds much quieter than I would like.

It is believed that to bypass such a restriction, it is necessary to reset the settings of the gadget to the factory. However, there are no accurate data as it will affect your device. Gadget models are a lot, each manufacturer follows its logic when installing standard settings. Reset parameters will inevitably entail the removal of data in the phone. Therefore, if the effect from the operation of applications to increase the volume is not enough, prepare well and make backup Information from the device.

Reset settings to factory, and then select the North America region as standard for your gadget. This is due to the fact that the manufacturers of smartphones set such restrictions for some countries where society standards may prohibit the application of parameters that can violate other people's rights.

One of the main problems of cheap smartphones is the poor quality of the built-in speakers, which causes serious difficulties when playing sound. However, several simple ways, From the built-in parameters to the use of submitted means, help the owners of smartphones with Android OS quickly navigate in the situation and change the sound settings to more comfortable.

You also seem to be on your Android too quiet sound? I would like to increase it? Learning how to increase the volume on Android via editing the Mixer_Path.xmLi file of the engineering menu.

You also annoys what is almost all Android smartphones And the tablets underestimated the volume of sound (quiet sound)? The thing is that there are certain standards of which manufacturers are held when issuing smartphones and tablets. The main purpose of these standards "not harm", but sometimes, such concern is only in harm to the user.

In this article, learn how to increase the sound volume editing the file Mixer_path.xml or using the engineering menu.

Increase the volume on Android - using the engineering menu

This method does not work in all devices, but still it is worth trying.

1 . Open the dialer and type a special combination:

• Normal Mode. - Normal mode
• Headset Mode. - Headset or headphone mode
• Loudspeaker Mode. - Speakerphone
• Headset_loudspeaker Mode. - loud connection with a connected headset
• Speech Enhancement - talking on the phone

4 . Go to the required submenu
5 . Here you will find more menus and edit the necessary:

• SIP. - Internet calls
• MIC - Microphone
• Sph - speaker
• Media - Reproduction of media files (music, video)
• Ring - Calls
• FMR. - FM radio.

Increase the volume on android - by editing Mixer_path.xml

Not in all absolutely smartphones and tablets there are Mixer_path.xml!

Before you start!

This article implies that on your Android device There are root rights! Without their presence, you do not get anything!

Now go to an increase in the volume on Android.

And so in order to change something you need to be installed one of these proposed file managers:

Now open it and go along the way:

/ SYSTEM / ETC

You need to find a configuration file. mixer_path.xml.:

Just in case, make a copy this file And let's start editing it!

Edit Mixer_Path.xml in Android

Option number 1 (values \u200b\u200bunder the parameter)

1 . Open the Mixer_Path.xml file and look at the line at first:

2 . Now among this heap you need to find:

Sometimes there may be more than one value, but two, then edit it is necessary first and second.In this particular example, it will be:

3 . We increase Value \u003d.«[ numeric value]» Approximately 5-10 points (it was for example 60, it became 70), it was:

became

4 . Now looking for a string:

5 . We are interested in 2 values:

6 . Change Value \u003d.« [Numeric value]» /\u003e About 5-10 points (it was for example 20, it was 30), it was:

it became:

7 . After you have made changes, we save, we leave and reboot Android;

8 . After rebooting, your smartphone or tablet will sound louder than ever, if the changes it seemed to you, it may still raise the values.

Option number 2 (parameters, common value)

If the file structure mixer_path.xml. It differs from the option proposed above, then we use this method.

1 . We are looking for a string:

2 . We look at what 3 . We rise to the very beginning of the file mixer_path.xml. And we are looking for ours

4 . Change value values \u200b\u200b\u003d "[Numerical meaning]" About 5-10 points (it was for example 84, was 94), example:

it became:

6 . We raise the values, these parameters are about 5-10 points;
7 . We save our changes, reboot Android, we enjoy the increased sound.

Hear an important call, watch a movie or listen to music with pleasure allows the optimally selected sound volume. You can adjust the sound on Android separately for applications, notifications, calls and players. Several ways of increasing volume are available to the user, including through the engineering menu, they are described below.

On the smartphones and tablets running android, you can adjust the sound using the volume key. The key is a "swing" - pressing up increases the volume, and the click down - reduces. If the application or film is open at the time of pressing the key, the volume of the media will change, and if the desktop is the volume of calls.

If the sound spontaneously switches to "quietly", check the smartphone to viruses. Delete applications that have access to audio adjustment, and rate the situation. Also check if the "Call louder in your pocket" mode is not enabled. To do this, go to the settings, select "Calls - Call louder in your pocket." If necessary, turn off the function.

You can configure the sound parameters in the standard smartphone or tablet settings:

1. Go to "Settings" and select "Sound".
2. Select "Volume".
3. Runners Adjust the volume values \u200b\u200bfor each type of sound - notifications, calls, applications.
4. Click "OK" to save the settings.

Depending on the Android version, the settings item may be called "Melodies and Sound", Sound, etc.

Gallery - How to Strengthen the Volume with Android

Method 1. Pull the notification panel
Method 1. Press the settings icon and in the opening panel, adjust the volume by the type of sound
Method 2. Go to the settings of the smartphone or tablet

Method 2 Select "Sound - Sound Volume"
Method 2. Adjust the volume and click "OK"

Setting the sound of headphones, speakers using phone or tablet applications - instructions

For users who are not standard sound volume on a smartphone or tablet, programs are developed - tone amplifiers.

VOLUME +.

VOLUME + is a program that allows you to increase the volume of the sound of the Android 2.3 melodies 2.3 and above. Works with a device profile, as well as with a headset and hands-free. Developers offer two versions of the program - free and paid. According to the reviews, the first increases the volume value by 20-30%, the second is 40-50%. Sound adjustment sequence in the application:

1. Install the program with Google Play and run. The Google Storage has three or four applications with similar name. The desired developer is Meltus.
2. In the program window, install a tick near the Speaker Modifications item.
3. Go to the speaker settings section.
4. In the VOLUME LEVEL menu, change the sound level. At the maximum value, distortion is possible, so check the quality of the audio and, if necessary, reduce the parameter.
5. In the Bass Enhance menu, configure the bass level.

To adjust the sound in the headset and Hands-Free, perform similar actions in the corresponding menu sections.

At the end of the setup, the application will save the parameters and will work in the background. You do not have to customize the sound after rebooting the gadget.

Video - Change the sound parameters in Volume +

How to raise the volume in the Volume Booster Plus

The booster program, by pressing one button, the increasing volume of the sound of the smartphone or tablet to the maximum possible values \u200b\u200bprovided for by the operating system. Instructions for use:

1. Download the program from the Play Market and install in Android OC.
2. Open the application. You will see a demonstration of the program features. Click Next several times, and then Boost.
3. Wait for the end of the process - the program will display a message on how much percent is enlarged sound volume.

The program does not support pre-installed profiles and does not have an equalizer. It spreads free and easy to use. The only drawback is an abundance of advertising.

Gallery - Using Volume Booster Plus

VOLUME ACE FREE will make your music and calls loud

VOLUME ACE - a functional program for adjusting the volume on Android. Allows you to change the sound parameters, create sound profiles and replace them on a schedule, and also blocks random changes to the sound volume outside the application. To customize the sound:

1. Download the program and run. In the main window runners, adjust the volume values.
2. You can turn off all the sounds by clicking on the vibration icon at the bottom of the window.
3. For calls, notifications and alarm clock, select the melodies, alternately by calling on the icons to the left of the tracks with runners.
4. Upon completion, click the Save button.
5. The program will offer to update the current profile. If you agree, press "OK", and if you want to create a new profile - "Back", and then three points on the right at the top of the display.
6. Select "Add Profile" and save the settings.

The planned change of sound profiles is a function required for business people who do not have to keep track of the state of mobile during negotiations or trips. To set up a timer:

1. In the main VOLUME ACE FREE window, press three points at the top of the screen.
2. Select "Planner".
3. Click on the plus to the right above.
4. Set the desired sound profile and select the actions time.
5. Adjust the Repeat - daily or week of week.
6. Click OK.

To change profiles, install for each other action in the scheduler.

You can get into the application settings by clicking in the main window to the icon in the form of three points and choosing "Settings".

Gallery - How to regulate the sound in Volume Ace Free

Step 1. Install the program
Step 2. Adjust the volume parameters
Step 3. Save the settings to a new profile.

Step 4. Go to the scheduler
Step 5. Configure the change of sound profiles by timer
Step 6. Block the ability to change the volume outside the program.

Adjustment through the engineering menu

The engineering menu allows you to fine-tune the sound parameters and remove the maximum volume restrictions.

Root-right to enter the engineering menu

Part of the versions of Android requires root access to enter the engineering menu. To quickly get root rights, use Kingo Android Root or Framaroot applications. Instructions for ruting smartphone or tablet on the example of Kingo Android root:

1. Load the mobile version of the program from the developer's site.
2. In the gadget settings, allow installing applications from unknown sources.
3. Install and run the program.
4. In the main window, click the One Click Root button.
5. Wait for the end of the process - the device will automatically reboot.

How to go to the engineering menu on android

After receiving the root access, go to the engineering menu using the MobileUncle Tools applications or the "Starting MTC Engineering Menu". If applications do not work, use engineering codes:

1. Open the number dialing panel.
2. Enter the combination of numbers to enter the menu.

Table - Combinations to enter the engineering menu Android

Device manufacturer	Team
ZTE, Motorola.	*#*#4636#*#*
Smartphones and tablets with MediaTek processor (most Chinese devices)	*#*#54298#*#* *#*#3646633#*#*
HTC	*#*#3424#*#* *#*#4636#*#* *#*#8255#*#*
Samsung	*#*#197328640#*#* *#*#4636#*#* *#*#8255#*#*
Prestigio.	*#*#3646633#*#*
Sony	*#*#7378423#*#* *#*#3646633#*#* *#*#3649547#*#*
LG	3845#*855#
Huawei.	*#*#2846579#*#* *#*#14789632#*#*
Alcatel, Fly, TeXet	*#*#3646633#*#*
Philips.	*#*#3338613#*#* *#*#13411#*#*
Acer.	*#*#2237332846633#*#*

How to increase the level of maximum sound

The engineering menu in different models of smartphones differs, but the structure remains similar. Entering the menu, you will see the settings sections - find the Audio item. The section includes subparagraphs:

• HEADSET MODE. Headset volume control.
• Normal Mode. General smartphone or tablet speaker settings.
• Loudspeaker Mode. Loud mode.
• Headset Loudspeaker Mode. Loudspeaker mode with a connected headset.
• Speech Enhancement. Conversation mode without connected devices.

For each mode, it is possible to change the volume. Setup is amenable to:

• MIC - microphone sensitivity;
• SPH - the volume of spoken speaker;
• Media - Multimedia playback volume and sounds in applications;
• Ring - the volume of calls;
• SIP - parameters of Internet calls;
• FMR Radio FM.

To configure a specific parameter, select it in the menu. For example, to optimize the sound of multimedia files, select Media. Under the selection string, you will find the settings for setting - levels and volume values. Complete:

1. Total volume levels 7, each corresponds to one pressing of the key- "Swinging". Level 0 - the most silent level, Level 7 is the most loud.
2. Select Level 0 and set the permissible volume in the field to the right - no more than 255. Press the SET button to save the settings.
3. Similar actions do for each level.
4. Set the maximum volume value for the profile - it will be the same for each level. Click Set.

Rewrite the volume values \u200b\u200binstalled by the manufacturer before changing them. If you do something wrong, you can always return the default volume.

Having completed with the setup of the media, go to the following items. The method of adjusting the volume for the microphone, speakers and the headset is the same.

Gallery - How to adjust the volume in the engineering menu

How to increase the quiet volume of rington call

To increase the ring volume, work with Ring in Normal Mode. Consistently change the values \u200b\u200bfor each volume level. Do not forget to press SET so that the settings are saved. Remember - when the maximum values \u200b\u200bof the sound quality is significantly reduced..

Increased speaker volume (when talking)

If you do not hear the interlocutor, talking on the phone, try to increase the volume of the speaker. Go to the NORMAL MODE section and select Sph. Increase values \u200b\u200bfor each volume level by 10-20 units. Set the maximum volume as desired.

Change microphone sensitivity

Similarly, you can configure the device if the interlocutor does not hear you. In the Normal Mode section, select MIC and set the sensitivity that is the same for all levels - approximately 240. For each level, alternately save the setting.

Microphone sensitivity when recording video and audio

If it seems to you that videos and audio recordings are not loud, in the engineering menu, go to the Loudspeaker Mode section and select MIC. Set the setting similarly to the previous item.

At the end of the setup, exit the menu and restart your smartphone or tablet. The device activates new parameters.

Video - Increased volume through engineering menu

Tricks to enhance sound on android

The external speaker solves the problem of insufficient smartphone or tablet volume when other methods do not help. Speaker - a small device with a plug of 3.5 mm, is inserted into the headphone jack or connects via Bluetooth. Cost - from 700 p.

Lifehak to increase the volume - while playing video or playing music to place a smartphone with a speaker towards the painted wall. The sound will be reflected from the surface at the same time enhanced.

Is it possible to remove the volume limit

On android smartphones, the maximum volume is valid for the protection of device speakers and user drums. Enlarge the upper limit allows the engineering menu - the MAX item. Vol. Maximum value - 255 units. It is impossible to set the value above, and it is not required - otherwise the speakers will not stand.

If you do not want to access the service menu, use the VOLUME UNLOCK application:

1. Install the program with Play Market.
2. Go to the application and activate the Enable Volume Power item.

Restriction The program does not remove, but increases the maximum value.

Test the volumes described above and select the optimal for your device. Carefully work with the engineering menu - incorrect setting can lead to disorders of the sound of a smartphone or tablet.