The selected configuration is specialized. The selected configuration is specialized attention This configuration is a specialized
Consider this issue on the example of configuration 1C: salary and frames.
Suppose we have:
- Changed Configuration 1C: Salary and Frames 7.70.310.
- A new release of the standard configuration 1C: Salary and frames 7.70.315.
To begin with, we find out what specifically changed since the release times 310.
Creating empty samples of typical releases
Download configuration updates from 1C site (release 7.70.310 and 7.70.315).
Unpack the archives into empty directories, for example, CurrentBase and Newbase for the 310th and 315th releases, respectively.
We run 1C enterprise and add previously created typical configurations to the list of information databases.
Configurations downloaded from the site 1C are specialized, so in order to make any actions with them, it is necessary to open them and save.
Run the configurator for the current base (CurrentBase, type release 7.70.310). When you first start, you must specify the database settings.
We leave everything as it is, click OK. We go to the "Configuration" menu - "Open configuration". A warning will appear.
Click OK. The configuration window opens. After that, save changes ("File" menu - "Save").
Similar actions must be done with a new base (NEWBASE, type release 7.70.315).
Comparison of typical releases
We launch 1C: Enterprise in the CurrentBase base configurator mode. We go into the "Configuration" menu - "Combining configurations", select the 1cv7.md file and the Newbase directory. The program will compare two configurations and will display the list of changes in the objects.
For convenience, we form a brief report ("Report) button to change and print it. It is known that all changes that were entered into our working configuration were specially commented in the texts of the modules, so we will not need some of the details of the report from the report. Before printing, I delete it. If you are not sure that the program was refined by conscious programmers - print as it is.
The update process is not a typical configuration
If there is a lot of changes, I recommend updating object groups (directories, documents, etc.), periodically persist. But you need to take into account their dependencies. For example, first of all constants and listings are updated, because They can be used in documents and other objects. Document logs need to be updated after all changes in the documents are saved.
So, we have a list of modified configuration objects. We will start updating.
Start 1C: Enterprise in the Configurator mode for the base you want to update. We go to the "Configuration" menu - "Combining configurations", select the 1cv7.md file and the newbase directory (typical release 7.70.315). We will combine small groups, so press the button "OFF. everything".
Here we have only one added object. The constant is new, could not change it, so we boldly tap it and press the "OK" button.
A configuration window with added constant opens.
Important!For all new metadata objects, such as added above, constant, you must immediately configure the rights. So let's go to the properties of this item and make the necessary settings.
Run a configuration combining again, press the button "OFF. everything". In order not to repeat, for the following groups of objects, I will not remind about it.
With the added values \u200b\u200bof the listings, everything is clear, without thinking by note them. With modified, too, more or less clearly, the values \u200b\u200bthemselves did not change, most likely changed only descriptions. With remote objects you need to understand. Most likely, they were added to the typical configuration. But in our case, everything is simple: just look into the list of changes that we printed earlier, which shows that these objects did not change. Therefore, we will not mark them.
Click "OK", save the configuration.
Global Module, Common Talitsa
First of all, look in the printout that we have before your eyes. Our common tables have not changed, only the text of the global module has changed. Therefore, you can not pay attention to the Terrible Warning "Object removed". We will simply not update all common tables.
You also need to pay tribute to programmers who made changes to this configuration. All the information needed is now available at the beginning of the global module. If we had to update common tables, then from the comments it was possible to understand what exactly was improved.
- Copy the text of the entire global module from a new typical release, then deposit all the modifications made by programmers.
- If you printed a change in configuration with detailed information Type: "Added strings (261, 261)", you can find the appropriate changes in the new typical configuration and copy them to the update.
Depending on what changes are more (refinement of programmers or new from 1C), I use the first or second method. In any case, the choice always remains yours. This time we will go on the first path.
Open the second configurator window for the NEWBASE database. Copy the text of the global module (menu "Actions" - "Select All", then "Actions" - "Copy") and replace them the text "Globalnik" updated configuration.
Now it is necessary to transfer all the improvements. We will open another configuration window with a database updated. It will not work two configurators, so you have to make a copy and take the data from it.
All refinement in our database commented in a certain way, so we launch the search by line of the form: "// modified OJSC" Horn and hoof "." The final code blocks are then transferred to the updated database.
This process is not fast and quite painstaking, because In addition to finding a place where to insert a changed code, you still need to have a presentation that this code does and analyze whether it will work in a new edition.
To be continued...
Specialized configuration
(Too old message for the answer)
2007-11-16 08:16:04 UTC.
When entering the configurator and select the "Configuration" menu, the window pops up:
"Attention!
Someone can explain what is "specializing" and how
her get rid of?
data?
Thanks for any useful info ...
A. Aleshin
Michael Kholyapin.
2007-11-16 10:10:22 UTC.
Hi Alyoshin!
Hi All!
In my absence put in 1C7.7 "Accounting and reporting of an entrepreneur" (IP).
"Attention!
This configuration is specialized.
Saving the configuration will lead to the impossibility to work with this configuration.
program Operational Accounting (Basic Version) "
Configuration "Accounting and Reporting of the entrepreneur" is designed for the basic version
move 1C. IN base version There is no possibility of sharing in the configuration.
Updates are installed through the "Download Changed Configuration" item, and
not through the "Configuration Combination"
I would have to transfer the remainder at the beginning of the month from the trade and the warehouse (where
cutting to the desired date) in the PI. But in IP Do not work the item "Association
configurations. This is how it should be or this is the result of "specializing"
data?
by a friend with Tis on an entrepreneur ... In the "data conversion" rules for sure.
How long have you been working with 1C?
If so, then it's better to invite a specialist, for the transition, and then you will go well
himself studying. If you ...
But in general, keep records in the entrepreneur very uncomfortable if needed normal
accounting for yourself. If only reporting is needed for II, then mine by the fireplace,
there is a refinement to the TIS in the form external reportswhich forms IP reporting
based on accounting in TIS. Here look at http://kamin.kaluga.ru/products/kup/
--
With Best Regard. Michael Kholyapin.
2007-11-18 13:27:57 UTC.
Hello everybody!!!
FRI Nov 16 2007 13:10, Michael Kholyapin Wrote to Alyoshin:
MK\u003e From: "Michael Kholyapin"<***@vmail.ru>
MK\u003e If you save the configuration under the non-vie, specializing
MK\u003e will disappear, but with her there will be nuances with subsequent updates ...
Thanks for clarifying.
I would have to transfer the remainder at the beginning of the month from the trade and warehouse
(where the convolution has been held to the desired date) in IP. But in IP Do not work the item
"Combining configurations". It should be or this is the result
Data specializing in?
Mk\u003e Why "combining configurations" to transfer residues?
MK\u003e Right now, there is no "entrepreneur" at hand, but, mine, there is a finished processing
MK\u003e Perm with Tis on the entrepreneur ... in "data conversion" rules
Mk\u003e There is sure.
Needed the following in the internet:
Has anyone used it?
Mk\u003e How long have you been working with 1C?
Hu to be honestly to say about 2 months and then the "tyka" method, that is, self-taught.
Mk\u003e Judging by the questions you have a very remote performance about her ...
What is - that is, I do not deny ...
MK\u003e If so, then it's better to invite a specialist, for the transition, and then you will
MK\u003e Neependent learn yourself. If you ...
MK\u003e In general, keep records in the entrepreneur very uncomfortable if needed
MK\u003e Normal accounting for yourself. If only reporting is needed for SP, then
Mk\u003e mine by the fireplace,
MK\u003e There is a refinement to the TIS in the form of external reports that forms reporting
MK\u003e IP on the basis of accounting in TIS. Here look here
MK\u003e http://kamin.kaluga.ru/products/kup/
Thank you, the boom is roaming further ...
A. Aleshin
2007-11-18 19:41:51 UTC.
My happiness from meeting you, Alyoshin, does not know the borders!
November 18, 2007 Alyoshin writes Michael Kholyapin:
Mk \u003e\u003e right now under hand no "entrepreneur", but, mine, is ready
MK \u003e\u003e Handling on a perf with Tis on an entrepreneur ... in "Conversion
MK \u003e\u003e Data "Rules is exactly there.
A\u003e In TISA there is only data conversion to accounting.
1. The transfer of data from TIS to the entrepreneur is also there, it simply lies in
Service - Additional features, not in service - data exchange. IN
extforms folder its files are called CVT_PBUL. *
2. Other processing also lies in ExtForms (but not visible in extra).
Its files are called PTR_PBUL. *, And it is called through processing
Universal processing of data unloading. There just need to choose the rules
exchange with entrepreneur.
3. In both no rules for documents input, so for yours
specific goal they are not suitable :-(
A\u003e Needed the following in the internet:
A\u003e http://infostart.ru/projects/1025/
A\u003e Has anyone used it?
This is the same as typical solutions from 1C itself. Perebroska
current documents, not residues.
MK \u003e\u003e If so, it is better to invite a specialist, to go, and then
MK \u003e\u003e You can learn myself well. If you ...
A\u003e Yes, you have ... Soft set ...
Take the service configuration "Data Conversion" and write rules for
the transfer of residues from the TIS in the mother-in-law. Professional in this issue of work
little.
--
The best wishes and the lowest bows,
Alexandr Ilyin [Perumovsky Vuglovskras] [Extreme Alcoholics]
Here in ru.Internet.Halyava most just fidoshniki (c)
Digitly assign other people's ideas. - "Advisor 96M"
As a rule, the user of the program 1C: Enterprise 7.7 can independently update its working configuration. The following are recommendations for updating a typical unchanged configuration. If your configuration is changed, completed in documents, reports, or printed forms, it is not recommended to update the configuration yourself. We recommend calling a qualified specialist for updating work.
Update standard typical unchanged configuration
Procedure for updating standard typical unchanged configuration
You must do the following actions:
1) Save the configuration before the update. How to do it - see an article.
2) We set up an update from the distribution.
In the database list, when you start the 1s program, a new item will appear with the update name.
3) Open the working configuration in the "Configurator" mode.
4) Open in the menu "Configuration -\u003e Configurations"
5) Select as a file to combine the file "1cv7.md" from the directory with an update installed by the informational database.
How to find this catalog? See the article.
6) If a warning is written "This configuration is specialized !!!", and nothing is updated further, then you need to do the following:
6.1) We go to the installed configuration-update from paragraph 2 in the "Configurator" mode
6.2) Select in the Configuration menu-\u003e Open configuration
6.3) There will be a warning about the transformation of the basic version to the standard, we do not pay attention to it. Press the "OK" button
6.5) The program issues the issue of maintaining metadata. Press the "Yes" button.
6.6) Press the "Accept" button in the "Restructuring of information" dialog.
6.7) The program displays the "Data Restructuring" dialog. Press the "OK" button.
6.8) Close the configurator.
The necessary changes in the update configuration are made. Now you can update this configuration.
6.9) once again perform paragraph 5) and we skip item 6)
7) The program issues a dialogue with checkmarks and switches. No need to change. Click "OK".
9) To the question of restructuring information, click the "Yes" button.
Click the "OK" button on the message about the restructing of information.
10) The main part of the update is completed. Close the configurator.
11) Find a directory with the update configuration.
12) Find a directory with a configuration - a working database.
13) Copy the ExtForms directory from the directory with the configuration-update to the configuration directory - the working base.
14) Open 1C: Enterprise, working base. If the program opens without errors, the update passed successfully.
To update 1C77 you need to merge the old and new configuration. [Email Protected] Bottle RT / 24487 [Email Protected] SQL 2.0.1-ETER2.4 / 1 installed 1C77 accounting. I copied the same update for her. When you try to merge first there was an error (1C, it and in Windows): "The selected configuration is a specialized." Treatment: Start 1C: Enterprise in "Configurator" mode. Create a new information database (click the "Add" button), or if it is already created, add the path to it. Open the configuration - the configurator displays a warning - "ATTENTION !!! This configuration is a specialized ... "Click the" OK "button and save the configuration. When saving the configurator will produce the desired conversion. Close the configuration. Running the "Accounting" configuration again in the configurator. Configuration - Open configuration. Combine configurations - I choose a new one. I get an error when combining data. Message 1C: The beginning of the process of combining configurations -Remployment of the leading objects -Ward configuration is a priority-related object: "Task" - an error in the process of combining configurations
[Email Protected] SQL 1.3.37 / 2.0.1-ETER1.11 / 6 - the problem is available. [Email Protected] SQL 1.3.25 / 2.0.1-ETER1.9 / 6 is available. [Email Protected] SQL 1.3.9 / 2.0.1-ETER1.10 / 6 The same (all through WW)
Please pay attention to the problem. Configuration Combining does not work, therefore it is impossible to update any configuration under Wine 2.0
I read that the problem is not in Wine. If "Combining the configurations" priority to select the current, and not loaded, which is logical, then the combination process passes normally and ends successfully. Otherwise, the error occurs in 1C, and how much can be judged not related to Wine calls.
Made a trace on File. During the merger in User / Wine / TEMP, it is created .TMP files, according to those containing, made changes, judging by their number they are created for the entire list of substitution objects.
The study of the OLE trace has shown that in the colocokobjectExternal function, the get_stub_manager_from_object was unscheduled. In this case, the errors are not returned, and it is believed that the object is simply disabled.
(In response to Comment # 13) \u003e 2 - Startup in a bottle with kernel32 \u003d n, ole2 \u003d n, ole32 \u003d n, oleaut32 \u003d n ended with\u003e association error. ??? Make kernel32 \u003d n is impossible, because It has transitions to windows kernelwhich is performed in the privileged mode and the Vaine is not supported. (The same applies to GDI32, User32, NTDLL) I managed to combine an empty configuration without any problems and some random (from some other task) using only OLE32 \u003d N. Ole32.dll is taken from WinXP. And it turns out for winehq and for [Email Protected] 2.1
(In response to Comment # 0) \u003e To update 1C77, you need to merge the old and new\u003e configuration. \u003e [Email Protected] Bottle RT / 24487\u003e [Email Protected] SQL 2.0.1-ETER2.4 / 1 I pulled out two bases from this bottle and tried to merge them. With the native OLE32, the union goes on than with the built-in, but still a message "Total file error when accessing An Unnamed File" appears in the terminal: Fixme: NTDLL: NTQueryInformationFile Unsupported Class (22) Fixme: NTDLL: NTQueryInformationFile Unsupported Class (22 ) Although at startup with the built-in OLE32 there is nothing like that. Conclusion is calls from the used native library (this version confirms the presence of NTQueryInformationFile () in the Table of Import OLE32). The result is a problem exclusively in OLE32.
\u003e I get a mistake when combining data. \u003e\u003e Message 1C:\u003e Beginning of the configuration combining process\u003e -Remplacity of the leading objects\u003e -Cavruitable configuration is a priority\u003e -Came object: "Task"\u003e - error in the process of combining configurations I get on my (interr) the database is the same error when combining the bases. For the first time I got it on the first Vine. Transition to two did not help
Cured such behavior. Recipe: When combining configurations, we will not put the substitution of objects, but a union. We carry out the merge, save the configuration. Next, you can re-make the association already with the replacement of objects. (In response to Comment # 23) Quoted1 \u003e\u003e I get an error when combining data. \u003e\u003e\u003e\u003e\u003e Message 1C: \u003e\u003e Start of the configuration combining process \u003e\u003e -Replement of the leading objects \u003e\u003e -Bug-loaded configuration is a priority \u003e\u003e\u003e Object object: "Task" \u003e\u003e -Proof error in the process of combining configurations \u003e\u003e I get on your (Interrore) the database is the same error when combining the bases. \u003e I first got it on the first Vine. Transition to two did not help
(In response to Comment # 24) \u003e Cured such behavior. Recipe:\u003e When combining configurations, we will not put the observation of objects, but a union. \u003e We carry out a merge, save the configuration. \u003e Next, you can re-make the association already with the replacement of objects. Created a new bottle on ETER-2.1 1C77 / 2Bases (in the usual 1C77 / 1C77 already too many databases associated with other bugs, this has created this to verify operations associated with association or other interaction between 2 databases, for convenience). So, ETER-2.1 1C77 / 2Bases has created an empty configuration, launched in the configurator mode. Configuration-Open configuration. Configuration-association configurations. I choose the MD file from the database "Testbase". I exhibit: current, merge (otherwise the error, as we know). So far failed to combine at all in any way. With a previously running method now: "Not a unique identifier.. By means" That is, to combine an empty base with an existing existing one. Then I tried how the Baga was now manifested. It was not possible for 2.1, rebounded. I installed the "Complex" configuration, 2 versions in different directories. I start the KOMPLEKSNaya database in the configurator, I select the MD file for the combination new version From the KompleksnayNayEnWEW catalog Parameters: current, union. The union passed correctly. Saved the configuration, when saved it correctly reorganized. Next, the union has passed successfully with the parameters: the current priority, replace. With the priority "downloadable" failed to combine neither in the first one in the second stage. If the priority does not have the value, then we close-postpone.
\u003e If the priority does not have the value, then we close-postpone. Priority matters. Please note that updating any typical configuration according to the 1C instruction is made with the priority "Downloadable" (and otherwise there is no point). In a way, the problem is not solved, correct installation No new updates (and not only) configurations are not possible.
(In response to Comment # 27) \u003e Priority matters. Please note that updating any typical\u003e configuration according to the 1C instruction is made with the priority "Downloadable" (and otherwise\u003e there is no point). Consequently, the temporary solution is not suitable.
I managed to update the type 1C 7.7 today, but I use the "Download modified configuration" method, which is not correct, although, as a result, everything has been updated quite safely. This mode in 1C is used to update basic configurations.
Quietly froze everything before dawn ...
Today I conducted an experiment. 1. Put the latest stable version 2.1.3 - does not work. 2. Put the test version 2.1.3 - does not work. 3. Rolled back to 2.0.4 - does not work. 4. Rolled to version 1.0.12 - everything was fixed !!! But, 1C 8 will not want to work with this release ... Although, this is not so important, you can put 1C: the server and Vine is not so needed for a small number of connections.
\u003e 4. Rolled back to version 1.0.12 - everything fixed !!! Yes, it works on the first. That is the problem. To elementary to install the configuration update in 1C 7.7, you need to search for a machine with Windows or [Email Protected] 1.x.
We postpone the tasks that have not been treated for more than 100 days.
The task is relevant ... It turns out to combine the configurations under Wine 2.1.3 ETER 3/5
We must reproduce and transfer Dmitry.
Because bottles [Email Protected] Bottle RT / 24487 No more Prepared new Swine 2.1 Bugs / 8430 Installed 1C77 Added base / VAR / FTP / PVT / Windows / 1C / 1CV77_CONFIGS / KOMPLEXNAYA / ATCDEMO Copied Update "/ VAR / FTP / PVT / Windows / 1C / 1CV77_CONFIGS / KOMPLEXNAYA / Updated. "
Played. Wine Wine-Etersoft-GL-2.1.3-alt24.m70p.25 Wine-Etersoft-SQL-2.1.3-alt7.m70p.8 Wine-Etersoft-2.1.3-Alt24.m70p.25 The problem is played if in the settings Combine Select Parameters: Configuration Priority - Downloadable Configuration The Combine Method - to replace the objects of only 4 options - reproduced only in 1st
Since the task 10837 must be solved, then this (actual repetition of that) is the same. Konstantin, please test the correction.
Help.
When updating the configuration, it displays "the selected configuration is a specialized"
Found in the internet answer
Due to the fact that the received update is universally (intended
For users of both basic and professional configurations) it is transmitted
In the form of a basic configuration. It is necessary to pre-produce
Convert the received update from the basic to prof.
For this:
1. Run the 1C system: Enterprise in Configurator mode.
2. Create a new information base (click the "Add" button).
If such information base already exist, then re-create it
not necessary. Specify the "name" and "path" (select the directory in
which is located received update; this file Placed in
Update subdirectory).
3. When you open the configuration, the configurator displays a warning:
"ATTENTION !!! This configuration is a specialized ..."
4. Click the "OK" button and save the configuration
(Select "Save" Section "File" Main Menu).
When saving the configurator will produce the desired conversion.
Damn, does not dope especially p.2
THANK YOU
sorry
1C Accounting Base
CONF 7.70.519
I have an update with the ExtForms folders, syslog and 11 more files
Julia2010.
Here it is written in detail with pictures. And among these 11 files should be update.txt, there is also written, how to update (for basic and typical).
Added:
ExtForms content must be copied to your database extForms. About files, too, in update.txt is written.