Nya to the internet dns probe finished. What to do if the error "dns probe finished no internet" occurs? Firewall manipulation

DNS failure or incorrect operation (in the article I will tell you what it is and why it happens) users very often observe various errors in the browser. And one of these errors is DNS PROBE FINISHED NO INTERNET. But the problem is not even an error, but that the browser cannot access the site. Most often, this message is displayed in Google Chrome. In Opera, Firefox, Edge, or Yandex Browser, the error itself, or the description may differ slightly.

As a result, it turns out that the Internet on the computer is connected and seems to work, but the sites do not open in any browser. Unless the Internet can work in some programs. But this only confirms once again that there are problems with the DNS.

In addition to the DNS probe finished no Internet error, there is another similar and very popular error -. In the article under the link, I wrote how to get rid of it and fix everything. The solutions are very similar.

Based on my own experience, I can say that fixing this problem is not difficult. There are several tried and tested solutions that should work. I here looked on the Internet what they write about this error. Well, such nonsense comes across. For example, I advise you to reset your router settings! What exactly is not necessary to do in this situation. And after such advice, in addition to an error with DNS, a router that has not yet been configured appears. And the Internet stops working at all.

DNS probe finished no Internet - what does it mean and what to do?

First, I will briefly explain the essence of how DNS works. When we try to visit a site, we enter the address we are used to .. Or click on some link. But the fact is that we cannot access the site at this address. Every site on the Internet is accessible by an IP address (which of the numbers)... But it is not very convenient to enter and memorize such addresses. This is where DNS servers come into play. Their task is to convert ordinary, familiar to us, site addresses into their IP addresses. Then the browser loads the site and displays it.

Usually, by default, we use the DNS servers of our internet service provider. Which often just stop working, or for some reason they just don't work stably (for example, from a strong load on them)... This is one of the reasons why the "DNS_PROBE_FINISHED_NO_INTERNET" message appears in the browser.

Also, the problem can be on the side of a specific Internet resource. Or in the settings of the computer itself. For example, the DNS Client service is running. Not infrequently some kind of malware (and sometimes the users themselves) change the network settings in Windows, after which the DNS server stops responding and similar errors appear.

How to fix DNS_PROBE_FINISHED_NO_INTERNET error?

In Windows 10, Windows 8, Windows 7 and Windows XP, this error can be corrected by almost the same methods, which I will discuss in detail in this article. But first, go through these points carefully:

• If you see this error when visiting one specific site (and other resources are opening) then the problem is most likely on the server side where this site is hosted. Try opening it on a different device / through a different connection.
• It is advisable to reboot your computer and router first. If you connect to the internet via a router.
• If possible, you can try to connect to the Internet in a different way. For example, over another Wi-Fi network. So we can exclude or confirm the occurrence of a DNS probe finished no Internet error due to the fault of the provider or router.
• Make sure you have an error free internet connection. Pay attention to the tray icon. There should be no yellow exclamation mark. If there is one, this is a completely different problem.

Let's move on to more serious solutions. I'll start with the most effective ones (in my opinion).

We use alternative DNS

Among all the solutions, I advise first of all to register in the properties of your Internet connection. I personally use them all the time.

This is done very simply. To quickly open the Network Connections window, press the keyboard shortcut Win + R, enter the command ncpa.cpl and press Ok.

Or open this window in any way convenient for you.

Right-click on the connection through which your computer is connected to the Internet and select "Properties". If via Wi-Fi, then this is most likely a "Wireless Network". If by cable - "Ethernet". This is in Windows 10.

Having selected the "IP version 4" protocol, click on the "Properties" button and write the addresses:

After completing these steps, the error should be gone.

Clearing the DNS cache

Another solution, which, according to my observations, often helps to fix the error with the DNS_PROBE_FINISHED_NO_INTERNET code. The point is to flush the DNS cache. This is not difficult to do.

Run Command Prompt as Administrator.

Copy it to the command line and execute (by pressing Enter) this command:

ipconfig / flushdns

You should see a message that the cache has been cleared successfully. After that, it is advisable to restart your computer.

Better yet, do a full reset of your network settings. Instructions:

You can try resetting your network settings if none of the solutions in the article will help you solve the problem with accessing sites.

Checking the operation of the DNS client (Windows service)

The DNS Client service is responsible for the operation of DNS in Windows. You need to check if it works. Perhaps restart it.

Go to Services. The easiest way to launch this window is through Search in Windows 10.

In Windows 7, for example, you can right-click on "Computer", select "Manage" and then go to "Services" there.

If your state and startup type are not the same as in the screenshot above, then open the properties of this service and set automatic startup. Then restart your PC, or start the service manually.

If the appearance of the DNS PROBE FINISHED NO INTERNET error in Windows was associated with a DNS client on the computer, then everything should work.

Disable proxy

Some programs, or even the users themselves, set the proxy settings, after which the Internet stops working. Rather, the Internet works, but the sites do not open. You need to make sure that proxies are disabled on your computer.

A few more solutions

If the problem persists, then make sure you followed all the recommendations correctly. Try to find out what is the reason.

What else can you do:

If I find out about new solutions, I will definitely supplement the article. You can also share your experience in the comments, or ask me a question.

Quite often, when trying to access some protected resources, a failure may appear with the description of the DNS_PROBE_FINISHED_NXDOMAIN error. How to fix the situation, now we'll see. There are several ways to do this, which are useful for both an ordinary user and a system administrator.

What does

Although it seems from the description of the failure, the problem is not always the case. DNS lookup errors are often issued by the WebMoney payment system. In relation to it, problems can often really be associated with incorrect configuration of servers, but blocking from the operating system itself (firewall) plays a primary role.

When trying to access a specific Internet resource, DNS lookup errors can also appear. In this sense, it somewhat resembles the notorious failure associated with the impossibility of displaying the requested page with a typical 404 code.

What does this situation mean? Only that, through the preferred settings, the computer system cannot connect to the remote server where the required content is located. In this case, even receiving automatic settings from the provider does not play any role.

DNS parameter errors

DNS server lookup errors can indeed be related to incorrect settings in the properties of the TCP / IP protocols. It is simply not possible to obtain automated settings for some sites and services.

So, for example, for services like Google and Yandex, you need to enter specific parameter values ​​that are not provided in the standard configuration. To configure, you need to go to the "Protocol Properties" IP fourth or sixth version, if used, and enter the necessary parameters. In this case, you should check the field of using the proxy server for local addresses. If there is a check mark there, it must be unchecked, since the use of a proxy by the system in most cases is perceived as a potentially insecure connection (nonsense!).

In addition, specifying preferred and alternative addresses can often cause problems with access to other sites. One resource will be unlocked, while the other will have the same problem. You will not change addresses for each resource? There is a way out of this situation.

Network settings

For most ordinary users, this problem is insoluble. But let's look from the other side at the occurrence of an error in determining the DNS server with the description DNS_PROBE_FINISHED_NXDOMAIN. How do I fix this crash? If you look at the situation, such a failure only indicates that it was not possible to determine the domain of ownership of the requested resource.

The simplest page refresh (browser Refresh button or F5 key) should help.

In addition to software failures, the problem that the DNS_PROBE_FINISHED_NXDOMAIN error is constantly issued can be associated with malfunctions of network devices (loose cable connection, incorrect router settings, mismatch between the computer name and the network used, a disabled wireless module, etc.).

All these problems are solved quite simply, and it is not worth focusing on them. But when some software tries to fix an error, you need to think.

The program fixes errors. How to get rid of this?

Let's move on to the simplest way to fix the problem. We call the "Run" (Win + R) console menu and enter the ncpa.cpl command, which provides access to the protocols used when connecting.

Further, setting up the network involves entering the address of the preferred DNS server (we prescribe four eights, and for the alternative we use two eights and two fours). The checkbox on the parameter confirmation line when exiting is optional, but it is better to use this parameter to check the system configuration and its future performance.

Resolving the problem using Windows

If the setting of the new parameters does not work, you should enter the command in the Shell to make sure that the local address is recognized by the system.

But it is better to request that the parameters be checked in the settings of the services that are currently running or are intended to be executed in the background. The services.msc command is used for this. After entering the "Editor" you need to check the line with the DNS client. The startup type should be set to automatic (network configuration cannot do without it).

As a last resort, you should pay attention to the preinstalled DNS client itself and its settings. To change the parameters, we use the standard "Control Panel", then go to the administration section and look for the "Services Menu" there.

The general settings tab will be listed by default. Again, the start type should be set to auto start. If the service is deactivated, you need to click the start button.

Thus, in most cases, the DNS_PROBE_FINISHED_NXDOMAIN error problem is solved. How to fix the situation seems to be understandable. But here it is worth paying attention to some third-party factors that have nothing to do with the network or the set parameters.

If all else fails ...

If it is impossible to correct or eliminate the error, you must use the appropriate automated settings and utilities. For example, Microsoft Fix It!

It can fix quite a lot of crashes, including correcting the parameters of Internet connections. In this case, user consent, as a rule, is not required, and the application does not change the parameters of the current connection session (unless it optimizes the connection speed in a programmatic way, which the user has no idea about).

Even rolling back the system to a previous state sometimes helps (assuming there is a problem with the DNS_PROBE_FINISHED_NXDOMAIN error). How to fix the situation is already clear. But initially you need to determine the very problem that caused this failure, and only then deal with its elimination. And the point here is not even the means used, but the concept of understanding the problem itself. Programmatic methods are good, but they do not always play a major role. And often the occurrence of errors of this type is associated precisely with the settings of the parameters of network connections. And full automation of settings often cannot guarantee that communication, when accessing a certain resource, will be carried out at the speed originally specified by the provider.

Finally, you can use the function to clear the contents of the cache of the default Internet browser. But this is rather an extreme measure that does not have a direct impact on the elimination of the problem.

The DNS server acts as a link between the computer and the hosting of the resources that the user is accessing. DNS probe finished no Internet- this is an error in connecting to the server, the message says that the client could not resolve the address or it is not available.

Cause of DNS probe finished no Internet error

The lack of a response from DNS will seriously alarm any PC user, as this may indicate various, including quite serious, problems with the system. This situation can be triggered both on the client side, which happens quite often, and on the server side.

Quite often, access to a specific address causes an error, while the rest work correctly. It is logical that the problem is in the site server, since your PC remains functional. The reason is, most likely, in carrying out repair work with incorrect redirection, work in the core of the site. Transfer to another address, both DNS and domain. DNS blocking from certain countries is possible, although this approach is rarely used.

When the problem is on the part of the resource, the only solution is to wait for the site to be fixed. This is usually done fairly quickly. To quickly see the change in page structure, you need to clear the cache. So, before accessing the site again, add the ipconfig / flushdns command to the console with the appropriate rights.

Often, a Wi-Fi router becomes the cause of various problems with connecting to the network. Try doing a factory reset, or a more conservative solution, de-energize it for 10-15 minutes. A similar action can be carried out for a wired connection. Try to connect to the server again. Using the system method, you can reboot the network adapter, and with it the PC can also be rebooted.

The reason for the failure can be in the DNS itself, failures in the client or system.

DNS probe finished no Internet - how to fix?

DNS probe finished no Internet Windows may be due to a problem with the DNS itself. Many ISPs today use the DHCP protocol to obtain settings or are set by a constant. You can try replacing the address with another one, for example, the public Google Public DNS. It uses modern algorithms to speed up page loading, is always available and has caching support. Also implemented protection against various types of Internet attacks on IP.

It should be borne in mind that the server is located at a certain distance from the client, so there may be a certain delay. There are also alternative public addresses, you can use them.

The development of Internet technologies also provokes new problems. So, the expansion of the media component, the modernization of programming languages ​​and the expansion of their capabilities allows you to turn previously static pages into dynamic ones. Such technologies are more and more advanced, and heavy content can provoke DNS congestion. In mild cases, this leads to a simple freeze; if it gets worse, an error can be observed.

To change the standard DNS server you should run:

1. Start and Control Panel;
2. Then select the "Network Control Center ..." tile;
3. Now click on "Change adapter parameters";

1. RMB on the connection that is currently used and Properties;

1. On the initial tab, move the checkbox to the "Use the following DNS addresses" position;
2. Enter major 8.8.8.8 and minor 8.8.4.4;

1. If it is necessary to set the DNS address for the router, set the preferred and alternative addresses in the opposite ratio.

You may be able to find faster internet servers for your region.

Troubleshooting client problems

If the server processing service is incorrectly configured on the system itself, or if it is completely disabled, then you should not expect correct operation. The situation is characterized by a complete lack of access to resources, and not a partial manifestation.

The first step is to check the service, it could have been disabled by a virus, the user intentionally or unknowingly, it is likely that the build curve is set. Also, certain networking applications can cause similar problems.

1. Click on Start and Control Panel;
2. Select the "Administration" tile;
3. Then "Services";

1. You need to find the element "DNS client", its status should be "Running", and the startup type should be "Automatic";
2. At the same time, you should also check the operation of the DHCP client, since the result of its good condition may be loading the correct DNS address, if receiving is in automatic mode;
3. If the process is stopped, it should be started by double-clicking on the parameter and select "Start", also add the service to autorun;

You can make sure of the usefulness of the procedure performed right away, but it is better to clear the DNS cache and reboot the system.

If this option did not help, then you can reset the settings using the official Microsoft Fix It solution. Works under Windows only. Allows you to carry out comprehensive PC diagnostics, including DNS services. The action is quite self-contained, you just need to download and run the utility.

An alternative option is to disable the IPv6 protocol; to eliminate the parameter, you should:

1. Go to the network management section, previously described;
2. Now Adapter Parameters;
3. RMB on connection and properties;
4. Uncheck the corresponding standard.

Additional sources of the problem and how to fix them

Next, you should check if the antivirus or another active protection filter interferes with the connection. This is notified on a special tab of the main window or in the main menu. Disable protection and check DNS functionality.

It's worth making sure the browser isn't the cause. Just launch through another browser. In which case, you will have to reinstall, update or switch to another browser.

In the end, if the problem has not been identified, then directly contact the service center of the provider. Most likely, it is he who has certain failures, in extreme cases, you will be helped to restore the network operation remotely or with the help of a wizard.

If you still have questions on the topic "DNS probe finished no Internet - how to fix the error?", You can ask them in the comments

if (function_exists ("the_ratings")) (the_ratings ();)?>