Rt n12 factory reset. Restore ASUS Laptop to factory settings. Factory reset on Samsung

Quite often, many laptop users have to deal with restoring the performance of their devices if for some reason they do not work correctly or the operating system does not load at all. At the same time, sometimes the usual rollback of the system restore to a certain checkpoint seems inappropriate. Thus, you need to use the so-called rollback (with a preinstalled operating system). Further, it is proposed to consider in detail the return to the factory settings of an ASUS laptop with Windows 10. To perform such actions, you can use several basic methods, which imply the use of both the system itself and the built-in tools. Since the tenth modification is taken as a basis, in the case of preinstalled Windows 7, some methods will not be available.

How to factory reset ASUS laptop while running system?

So, to begin with, let's focus exclusively on the instrumentation of the operating system itself, provided that it somehow boots. In Windows eighth and tenth versions, rolling back an ASUS laptop to factory settings (like a laptop of any other manufacturer with the same systems on board) can be done quite simply.

To do this, open the options menu, then go to the update and security section, and then use the restore menu item. Immediately at the top there will be a full reset item, which will allow you to return the device to the state as if you had just bought it. During the recovery process, which can be useful to many, you can use a reset with saving user files, or you can do without it.

Alternative method for resetting parameters

If we talk about how to reset an ASUS laptop to factory settings using an alternative method, from the section described above, you can select the item for special boot options (not suitable for Windows 7).

Again, upon restart, you will need to tell the system to return to its original state and wait for the end of the recovery process.

Note: you can call a restart in this mode through the corresponding menu item "Start" while holding down the Shift key.

How to Restore Factory Defaults Using Built-in Tools: BIOS Preliminary Steps

But all this has so far been related exclusively to those situations when the operating system is not damaged to an extreme degree and is still working (even with errors). But how do you reset an ASUS laptop to factory settings if Windows does not start under any pretext? In this case, you need to clearly understand that almost all laptop manufacturers build special utilities for quick recovery into their devices, generally called Recovery. ASUS laptops also have such a tool. However, using it is not as easy as it might seem at first glance. The catch is that its call is hindered by the Boot Booster quick start mode set in the BIOS, which needs to be disabled.

To do this, you need to enter the BIOS by pressing the F2 key when turning on the laptop or during the reboot immediately after the start screen appears, then go to the boot section (Boot) and set the specified parameter to the value corresponding to the disabled state (Disabled). After saving the settings (F10) and restarting, you can proceed directly to the reset process.

Recovery process

To call the recovery environment, when the start screen appears, press the F9 key, after which a black window will appear with the Windows Setup (EMS Enabled) line.

Next, you just need to confirm the choice of action by pressing the Enter key, after which the rollback process will be activated, which in some moments will be similar to a "clean" installation of Windows, and after its completion and several restarts, you will see the "Desktop" of a fully functional system, as it were from scratch ...

We figured out how to reset an ASUS laptop to factory settings. It remains to give some practical advice for the future. Keep in mind that if you reinstall the operating system yourself, removing all hidden partitions and formatting the hard drive, the built-in utility will become unavailable. The same goes for replacing the hard drive. In addition, to avoid the hassle of performing laptop recovery steps in the future, do not be too lazy to take care of creating backups in advance for emergencies, especially since external USB drives are now relatively inexpensive, and they can even fit a copy of the entire hard drive from working OS and all installed programs. However, if this is not possible, using standard Windows tools, you can create a copy of only the system configuration without saving applications or user files and saving on a regular USB flash drive. You can also use all sorts of highly targeted backup or imaging utilities, and not use only Windows toolkit (for example, in case of unexpected damage).

Many of you are wondering how to make a hard reset on an Asus tablet. In this guide, we are going to show you how you can factory reset your Asus tablet.

Please note that the following instructions can be used for the Asus Transformer and Asus Memo series tablets.

It is also worth recalling that after a hard reset, all personal data from the internal memory of the Asus tablet will be deleted, so you need to copy important files to an external medium, for example, a microSD memory card or a computer.

METHOD 1: Hard reset on an Asus tablet through the settings menu

Go to the menu Settings and select the section " Vrecovery and reset". At the very bottom, click on the option " Reset". Wait until the factory reset process is complete.

Some experts advise repeating this procedure 3 times. I don’t know why this is needed, but if you didn’t manage to solve the problem, try again hard reset on the Asus tablet.

METHOD 2: Hard reset on an Asus tablet via the Power / Volume button

If you cannot turn on your tablet, try doing a hard reset using the following steps:

Turn off tablet
Press and hold the button Volume Down and then the button Inclusions... Hold both buttons for 10-12 seconds until small print appears at the top of the screen.
After a few seconds, you will see an icon in the middle of the screen. Click the button Volume Down, to choose " Wipedata", and then Volume Up to confirm the start of the operation.
The tablet should begin the factory reset process.

METHOD 3: Hard reset using the Power / Volume button (for TF103 / TF303)

Turn off tablet.
Click the button Volume up and Power button... Release them after 2-3 seconds.
A menu appears with the following options:

Reboot Droidboot
Reboot
Recovery
Power off

Select option Recovery to go to the recovery menu. If you have an Android robot with the message “ #command", Press the button Volume Up / Down for a few seconds.
After that, you will see a menu with several options. We are interested in " Wipe data / factory reset».
Confirm the deletion of personal data by selecting the option “ Yes - delete all user data».
Restart your tablet using the " Rebootsystemnow».

That's all! One of these methods should help you do hard reset on the tabletAsus.

The need to reset the router settings may arise for various reasons. How to perform this procedure on ASUS routers - later in the article.

Why do I need to reset the router settings?

The most common reasons for performing a router reset are:

There are problems with the Internet connection (periodic loss of connection, sharp drops in connection speed, etc.).
There was a need to reconfigure the router, but the password for its Web interface was lost.
In the case of Wi-Fi routers, the password from the wireless network was lost.
When trying to connect to the router to configure / reconfigure it, a network error occurs when the standard IP address is entered (i.e. the IP address has been changed or the DHTP server built into the router software does not automatically assign the address to the computer).

In such situations, it is easier not to delve into the settings of the router, but simply reset them for subsequent reconfiguration in simpler ways.

How to reset your ASUS router?

There are two ways to return the configured parameters of routers to their factory defaults - hardware and software (remote).

The first method (hardware) involves the following actions:

Find on the router case a button marked as "Reset", "Restore", "Reset / WPS", "Reset" (depending on the router model, other options are possible in different languages, graphic images are not excluded).
In some models of ASUS routers, the reset button does not protrude above the body. It is somewhat pressed into it, which is done to protect it from accidental pressing.
Press the button (if it is pressed into the body, press it with a thin object) and hold it for a few seconds.

The success of the reset can be judged by the illuminated indicators on the front panel of the router. Usually all indicators light up at the same time for 1-2 seconds and then go out (except for the power indicator). If the router is connected to the computer via a network cable, the local area network (LAN) connection icon will display information about the loss of connection for a few seconds - this will also mean that the reset was successful. If the wireless (Wi-Fi) router is reset, information about the loss of connection with the Wi-Fi network will be displayed on all devices connected to it (phones, tablets, etc.).

In some cases, pressing and holding the reset button may not work. In such a situation, you can proceed as follows:

Press and hold the reset button.
Without releasing it, turn off the power of the router (by pressing the power button or by disconnecting the device's power supply from the mains).
While continuing to hold the reset button, turn on the router.

If this does not lead to the desired result, it remains to use the second reset method.

Soft reset it is used not only if the reset button is inoperative or if there are any other hardware faults, but also if there is no physical access to the router (for example, it is located in another - closed room). In order for the values to programmatically, you need to do the following:

Connect to the router (via a network cable or wireless connection).
Open any browser on your computer.
Enter the IP address "192.168.1.1" or "192.168.0.1" in the search line. A page will open where the user will be asked to enter a login and password from the router's web interface.
The default login / password is "admin / admin".
After entering the Web interface, you need to go to the "Administration / Administration", "System settings" or "Manage settings" tab (other options are possible, depending on the specific router model and firmware version).
Next, you should find the item "Factory settings", "Default settings", "Reset settings" (etc.).
Next to this item (or when you click on it and go to another page) there will be a button or link "Restore", "Reset" or "Apply default settings".
Click on the reset button / link.

The method cannot be used if the exact IP address of the router in the network is unknown (it could be changed by the user) or the login / password from the Web interface. In such cases, all that remains is to use a hard reset.

Android's mobile OS is not only an easy-to-use little thing with which you can perform many daily tasks, but, at the same time, a capricious smartphone, which, at the most inopportune moment, can “freeze”, give an error and “glitch”. The problem of a "tired" operating system can be solved quickly, just reset all settings. Also, this procedure is also necessary if it is decided to sell the Android smartphone.

So, in more detail, how to reset the settings to factory settings on an android? When buying a smartphone, it “flew”, quickly responded to a call, search, and now it can completely infuriate, because it takes a very long time to open menu items, and launching any application is generally unrealistic. It's time to do a full factory reset. BUT, there is one important point!

First of all, you need to save all the data that was once stored in the android's memory, and these are: favorite photos, phone numbers, important dates, some notes and SMS messages. In general, everything that later will be difficult to remember and restore. After all, a factory reset deletes everything on the smartphone!

METHODS: How to factory reset on Android

First method: Using the menu.

An elementary method that will help a smartphone to return to the state when it was sold. Simply reset all data by pressing the corresponding "button" in the Menu. But, this method is only suitable for those androids that do not freeze when moving through the points.

It is necessary to do this….

Move and press the following "buttons": Menu – Settings – Recovery Reset.
Next, move to the very bottom of the list and there will be a button, which is called differently in each smartphone model. This, either " Reset", or " Erase all data", may be " General reset"Or" Reset phone settings", Or something else.
As soon as the "button" is pressed, the OS will warn the user that all data and personal information, as well as settings, applications, phones, will be erased. It remains only to confirm the intention to delete all this by pressing the key - " Erase».

Method two: Hardware buttons are used.

If the smartphone "hangs" strongly, you can also try this method - a general reset of all settings using the hardware "buttons" of the android. In the case when the android “dead” “hangs” at boot, stopping at the logo, or having loaded something, the smartphone “does not want” to navigate the menu point by point, a window appears all the time indicating an error, and the capacitive screen is not adequately works, then this type of reset is what you need.

So, how do you factory reset an android?

Click on the " button"Turn on the phone and keep it until the android turns off completely. Further, in recovery mode, called " Recovery», You must press the key combination at the same time, and these are two or three buttons. The combination is different, depending on the android model and manufacturer, but you only need to press them to enter the " Recovery».

For example, these are the keys: reduce the sound and the power button of the hadroid, in the models " Acer" and " Asus».

And in "Lenovo" these are three buttons: increase the volume, power and decrease the volume. Press them at the same time and hold until you feel the vibration of the smartphone. And then press the volume up button four times. Then, press two buttons simultaneously: power and volume up.

Android Model " Huawei»For ten seconds, simultaneously hold down two buttons: power and volume down. Then, simultaneously press the buttons: power and in the center, adjust the volume button. Hold, in the same way, for ten seconds. As soon as the android logo appears, release the power button, but keep holding the volume key. After that, a picture of an androd will appear - a robot with gears, holding the key in the center of the volume control, smoothly switch to increasing the volume. Keep holding until a green bar appears, indicating loading.

For smartphone “ Lg», The combination looks different, these are two keys: Power and decrease the volume. As the logo appears, lower both buttons, and after one second, press them again simultaneously. Hold until the entry to the " Recovery».

For " Samsung"A little differently. Press three buttons simultaneously: increase the volume, " Home»And power, or a combination of two buttons - power and volume up.

If you have an adnroid in your hands “ Sony", Then you need to do this: simultaneously press the buttons - power and increase the volume. Or like this: connect your smartphone to the mains. Wait until the green indicator lights up, indicating the power of the phone. Next, using a paper clip, press the recessed button " Reset", The screen will immediately light up and for a few seconds, hold down the power button. Then, release the button and press the sound increase button five to six times.

There are two options for " Prestigio". First: a combination of power and volume up. Second: a combination of power and sound reduction.

For android models "Xiaomi" and "Meizu", the combinations are the same, these are: power and increase the volume, then release the power key and wait for the logo to appear on the screen, hold the volume up button further. After waiting for the menu " Recovery", Remember that the question was asked about how to reset the settings to factory settings on an android? Continue restoring your phone to work.

But what to do if Recovery appears, but does not respond to the touch of a finger ?!

To move through the points, you can use the buttons - decrease to increase the sound, therefore, these will now be the up and down keys. And by choosing reset, you can confirm your action with the power key.

Next, you need to move to the point " Wipe data / factory reset". The desired menu will open and further, you only need to confirm the complete deletion of all data, that is, press the android power button again. The action has begun to reset all the information, and as the process ends, you will need to select an item called - Reboot System, which means that the phone will start rebooting. After this operation, the android will be "clean" and efficient, but without personal information.

Third method: Symbols and signs are used in combination.

Press like this: "Phone" application and code: "* # * # 7378423 # * # *" or "* 2767 * 3855 #" or "* # * # 7780 # * # *", then - "Challenge". Then the android will reboot and start erasing all data and information.

Option 1

1. First you need to turn off the phone
2. Press the buttons Volume (+) + Turning on for a short time
3. When the Android image or logo appears Asus release the pressed buttons
4. Click Turning on to enter Recovery Mode
5. Using Volume Control select Wipe Data / Factory Reset and confirm by pressing the button Nutrition

6. Then, in the menu that appears, select Yes - delete all user data using Volume Control and confirm the choice by clicking the button Nutrition

7. Select the reboot system now menu item at the end, to complete and reboot

Option 2

1. Go to Phone Settings

2. Choose Recovery and reset

3. After tapping on Reset settings

4. Click on Reset and agree to the destruction of personal information
5. After the gadget restarts, the reset will complete

Asus Zenfone V Factory Reset

Attention!

In order for the hard reset to be completed correctly, it is desirable to charge the battery 80%.
After performing a hard reset, all of your personal data and applications in the internal memory will be deleted.
Images or videos for some actions may not exactly match the model of your particular phone.