How to use generating the web. Reproduction of articles by the program Generating The Web. How is the process of copying articles
Quite often you hear about the reproduction of articles. It would seem quite understandable procedure, implying some mythical way of creating tens or hundreds of articles from a single basic article, but for what purpose is all this happening ...
Who benefits from copying articles?
This is done in order to get the required number of ready-made articles on similar topics. This method of obtaining a large amount of content is much cheaper for the publisher than obtaining a similar number of articles with the assistance of a copywriter. This kind of content is widely used when it is placed in catalogs or on thematic sites (fortunately, there are a lot of them on the net now!). The meaning of articles during reproduction, as a rule, is preserved, therefore, in the text, you can additionally embed suitable thematic links, which purposefully direct the user to a specific resource. Thus, the reproduction of articles contributes to an increase in traffic to the resource, and, therefore, to the promotion of the site.
How is the process of copying articles going?
In practice, texts are easily reproduced. The whole process, as a rule, is built on a banal collection of synonyms using special programs. That's all! Such a "stupid" selection of words similar in meaning, thanks to which the text is obtained, is called nothing more than synonymizing. Meanwhile, the possibilities of programs for generating texts are somewhat wider than it might seem at first glance. The fact is that synonymizers have the ability to replace whole sentences, and this, you see, already presents certain technical difficulties, albeit feasible.
Before the source text is in the program, it is subjected to a certain modification. In other words, a certain formula is compiled from the text, as a result of which each word is selected possible options words-synonyms, the places of some sentences are changed. The text is undergoing significant changes.
Reproduction cost of articles
Prices for synonymizing services can differ significantly from each other (approximately 3 times!), But site owners are still willing to shell out money, since this, in the end, significantly saves money.
Synonymizing programs overview
As you can imagine, programs for generating texts can be completely free and on a paid basis. In addition, there are free text reproduction software built into some of the popular resources. For example, scripts Lieks, Content 1, Allsubmitter, etc.
So, I present to your attention the TOP-3 free software to generate texts in Runet:
ANCHOR. After downloading and running the file, 5 tabs will appear in front of you, with which you will have to work properly. The process of generating the text consists in alternately filling in the corresponding fields.
SEO Anchor Generator... This program positions itself as a kind of generator of anchors or descriptions. However, it is also used to reproduce small texts. Due to the fact that the author of this masterpiece is in constant search of program improvements, now there is a free online version with a text generator. The program menu is very easy to learn.
Generating The Web. Free software that has more possibilities than those described above. Through its application, it is possible to perform the most important tasks for generating texts - rearranging and enumerating synonyms using external dictionaries, correcting errors in the results and removing duplicates by adjusting the number of shingles, setting restrictions on the number of generated variants, etc.
In this post I will talk about a great program for high-quality article reproduction. The program is free, has a Russian version, has many settings and functions.
For a long time I was going to use the promotion of articles, so I finally chose the time and started. Writing a unique article for each directory is not serious, but the articles must have a certain uniqueness. It took a high-quality copy of several articles for placement. Tried several reproduction software and stopped at the program Generating The Web... I'll tell you about it in this post.
Generating The Web Program can do a lot, although it is free. The main functions of the program:
Generation / reproduction of texts;
Synonymize;
Placement of links with the desired anchor;
Synonymize articles with Generating The Web
Synonym bases
To begin with, the program already has a built-in synonym base and it is possible to use your own synonym bases. You can load up to 5 user bases of synonyms. There are 3 types of synonym bases:
Built-in database of synonyms (comes with the program);
Database of recently used synonyms (self-learning database);
User bases (up to 5 of any synonym bases).
To select bases of synonyms that will be used for synonymization, select the Dictionaries item from the Synonyms menu.
A dictionary window will appear.
Select the ones you want.
Synonymizer operating modes
There are two synonymization modes in Generating The Web. This is the standard mode and group mode. Both modes are discussed in more detail below.
Standard synonym
To set synonyms in standard mode, select Synonyms => Show synonyms in the menu. All synonyms will be highlighted in gray. Hover over the word you want to replace with synonyms and click right click... Select "Show synonyms" from the drop-down menu.
A window with a list of synonyms to replace will appear. You can delete unnecessary synonyms. You can add your own synonyms. After editing synonyms, click "Replace with synonyms" and the words will be added to the text as a construction "(Word | Synonym 1 | Synonym 2)".
Synonymizer group mode
To work in group mode, select Synonyms => Group mode in the menu. The group mode work window appears. All synonyms will be highlighted in gray.
You can add synonyms to all found words, or you can add only a few words.
To add all words, right-click in the workspace of the program and select "Add all found".
To add individual words, right-click on the desired word and select add to list, or place the cursor on the desired word and press F3.
Added words will be highlighted in green. All selected words will appear at the bottom of the program window and can be edited by adding new synonyms and deleting unnecessary ones.
Press apply and all selected synonyms are added to the text.
Linking in texts
Automatic placement of links allows you to replace words in the text (they are anchors) with links when generating, in accordance with the set options.
To add links, check the "Place links" item in the "Source text" tab. After that, the "Links" tab will appear.
The program supports two independent groups of links, for each of which you can apply different settings.
For automatic placement of links, add a list of links in the format “URL [anchor1; anchor2; anchor3; …] ".
You can adjust the number of links in the text, the frequency of placing links, the way the link is selected, and other settings.
Generating texts
To generate texts, the program uses the following constructions:
Generating brute force:
{ 1 | 2 | 3 | 4 }
Generating permutations
Simple permutations:
[ 1 | 2 | 3 | 4 ]
Permutations with the same separator:
[ 1 | 2 | 3 | 4 ]
Permutations with different separators:
[ 1 | 2 | 3 | 4 ]
The program also provides the use of constants, variables and include files:
Using variables:
#set% VAR% = SomeValue
Using constants:
#const = (const1 | const2 |… | constN)
Using include files:
#include "full path to file"
Generation results settings
The following generation settings are available:
Length of text from and to;
Maximum number of texts to be output;
Generation in order or random;
Auto-correction of texts;
Removal of similar texts;
Placement of links.
Filtering by uniqueness of generated texts
Highly useful setting programs. Allows you to customize the uniqueness of the resulting texts. Filtering can be done during generation, or after generation.
Text filtering can be done in two ways:
Removing exact matches.
Completely matching variants are deleted (no additional settings, the deletion is very fast).
Removal by shingle method.
In this case, you need to specify the length of the shingle (the number of words in the shingle) and the maximum allowable percentage of text similarity. The following rules work here:
The shorter the shingle length, the more unique the options remain after filtration.
The shorter the shingle length, the slower the options are sorted.
The higher the maximum percentage of similarity, the more texts remain after filtering.
Shingle filtering ignores HTML tags. Filtration is slow enough.
Hotkeys for inserting symbols
Hotkeys can be used to insert basic symbols used for generation. To see a list of hotkeys, right-click in the program workspace and select insert symbol. There will be described the symbols and the corresponding hotkey to insert the symbol.
Saving breeding results
In addition to all of the above, the program has good help, where all the features and settings of the program are described in detail with examples.
Using this program for the reproduction of articles, the output can be obtained with high-quality reproduced texts of the specified degree of similarity with a minimum of time. You rarely see free software of this level. Thanks to the developers.
Download latest version programs for reproduction of articles can be found on the website of the developers
The other day, I actively started working with articles, as I promised, I think to check in practice this method work, and this is not only to, but rather simply bring the project to the top. The subject in this experiment is a site about the Gothic 4 game. I'm going to prove to potential buyers that there are good prospects there, given that the peak of popularity of the game (or rather, simply) will begin in late autumn + all winter. Therefore, it is a good idea to prepare the foundation for this business right now. Generally a niche computer games- very interesting, there are positive aspects, I will tell you about it somehow. So, back to the topic of the post - you can post articles both on paid sites and on the internet full of free options - blog hosting, services offering to create your own simple website and host them, plus, of course, article directories.
But for this you need source material - the articles themselves. The effect of identical texts is minimal, it's good when each of the published notes is more or less unique. Therefore, a mandatory point of such promotion is - that is, the generation of texts from 1 unique pair of hundreds of similar, but not identical materials. For the Gothic, I decided not to risk it and ordered this service from one person on Sercha who does this - I paid 14 bucks for 55 articles (1.4 wmz for 100 characters in an article). In principle, the texts turned out to be very good, I am satisfied with the result, it remains only to find out how they will be perceived by the PS :) Who will be interested in contacts - write to ICQ.
However, there is a second method - do it yourself. There are some programs for reproduction of articles, which, in principle, also allow very good results to be achieved. To admit this issue, I have been interested for a long time, somehow I tried to study the text generation module in AllSubmitter, but its interface is so cumbersome that it was not so easy to do it. But now, since now the issue with articles has become quite acute, I had to search the net, blogs for other software to solve the problem. And I found it.
SEO Anchor Generator
Although it is not positioned as an article generator, but suitable for descriptions, anchors, her can be used... The main features are quite standard for this kind of programs:
- support for 3 kinds of constructions (brute force: (x1 | x2 | x3), permutations:, permutations with separator: [+ separator + x1 | x2 | x3];
- support for nested syntax;
- syntax highlighting, brackets;
- restrictions on the length of lines, the number of results.
- error correction: several spaces, a capital letter in a word after a period, adding spaces after punctuation marks, etc.
- mixing results;
- deleting identical lines;
- saving generated lines to a file, or copying to the clipboard.
This program for generating texts is free. To get started, if you have never duplicated articles, I recommend reading the documentation and trying the program in work on simple constructions... It will also help you get used to the interface and deal with a lot of settings.
Generating The Web
A little later, I found on Serch another very interesting program from a company that develops seo software - Generating The Web... It is also distributed absolutely free of charge, but here she has more opportunities than the first.
The program performs all the basic tasks for the reproduction of articles that I said came out - permutations, enumerations, correcting errors in the results, limiting the number of generated variants, etc. I will only point out its differences:
- permutation with different separators -, as a result we get, for example - 2, 3, 1 and 4.
- using variables (#set% VAR% = SomeValue) - variables come before the text, help to make the construction more readable.
- saving results to one or several files; when saving generated articles, you can choose any convenient separator in one file.
- Placement of links in the text!
Separately, it should be noted 2 very unique features.
Substitution of synonyms using external dictionaries! - 2 dictionaries are built into the program, plus you can connect custom dictionaries. Moreover, if you add synonyms to the text campaign, they are saved in the so-called "database of recently used synonyms" and then used in new tasks.
Removing duplicates using the shingles method- in addition to exact matches, there is such an interesting method that allows you to get the highest quality uniquely reproduced articles. As parameters, you set the length (number of words) of the shingle and the percentage of text similarity. For example, I put shingle - 3, the similarity is 10%, as a result of which, out of several million options, I got about 50 articles that satisfy the requirements.
That is, the shorter the shingle length, the more unique the results and, of course, the longer the processing will take. The greater the percentage of similarity, the more texts you will have after filtering. The process takes a lot of time, but I stake on the quality of the articles, so I don’t worry about the fact that it is “long”. The algorithm of my work is as follows- I break the text into small paragraphs, after which I start adding options to iterate over and permute each of them. Then I start generating the text and take on the next piece of the article - while I'm doing it, the results from the past will be ready. Then I fill it all in several files - for example, I got 3 files for 3 paragraphs of text. Well, at the end, randomly from different files I combine the final version.
Like this :) In my opinion, the results are quite good. So, if someone needs to copy the text, I could take on this job :) Holia, of course, it's better for you to figure out the program yourself - spend a couple of hours (even days) on it, but in the end the knowledge will turn out to be very valuable.
Who uses what other copying software? Or are you ordering services?
P.S. You can also order a copy of the article from the Textprom company, it is convenient and of high quality.
P.P.S. The sentry. Cool Budgeting Program - Expert Estimate.
In such heat, only air conditioners will help you out - buy in our online store.
If you want to increase the link weight of your articles and the site as a whole, you will either have to buy links or get them in other ways.
Perhaps the best quality is the placement of links in articles on good trust article directories. Unfortunately, there are not many of them, there are a lot of garbage ephemera, namely trust ones, not even hundreds.
Read and study! It will always come in handy and will make your site even more beautiful and more expensive! There is never a lot of knowledge, there is only a lot of laziness.
You will need two things to get it working:
1. You must have a lot of text to post.
2. You must have a selection of sites that are ready to accept your articles.
For my needs, I have been collecting and sorted sites for almost a year into a single database and I can say that it turned out not a bad Info-base
How it works?
In order to effectively use our Info-Base, you need to learn how to create a large number of texts.
Of course, all texts must be unique, otherwise the sites that have accepted your articles will be sanctioned and there will be no use for posting.
In addition, it should be borne in mind that if the catalog of articles is good, then all texts are manually moderated and bad. no unique article will not pass.
It is very troublesome to write separate articles for each catalog or press release service; it is very expensive to buy on stock exchanges.
Therefore, most webmasters are engaged in copying texts.
I foresee the questions of skeptics that reproduction no longer works and that search engines are calculating multiplied texts at once.
Yes, this is partly true, if multiplied in automatic mode and use synonymizer databases. The texts are not readable, stupid arrays of keywords. You've probably come across sites on the Internet filled with such crap. Now there are much fewer of them.
So, reproduction works if you do it in a semi-automatic mode and wisely.
There are two ways that really work.
1. We turn to specialists and the article will be reproduced for you.
I once addressed the guys, they did it quickly and efficiently.
On all directories where I posted their reproduced articles, they passed moderation without problems.
The cost is not great, on average, reproduction of an article for 2000 characters will cost you $ 7.
2. We multiply the text with special programs
For independent reproduction, you need to have a lot of endurance and some skills. But it's not the gods who burn the pots, so let's go!
You need to manually select synonyms and the necessary phrases for replacement. Sometimes you can change whole sentences and make several attachments for replacement.
So that you can understand this fuss, I shot two video lessons on working in two programs.
I advise you to look at both because information flows from simple to complex.
But I assure you that today you can make your first breeding ...
I mean, the multiplication of the text!
1. Reproduction of tweets.
First, I'll show you how to multiply a small text.
For my service "Tweet Run" I am doing propagation in the Generating The Web program.
The program has a simple interface and is fairly easy to use.
A few words about the bases of synonyms.
Advice. At one time, I spent a lot of time searching for databases on the Internet. rocked-tried-spat and looked again-rocked spat!
Output. Do not fool yourself with these bases and start studying the second program for reproduction of texts.
2. We reproduce the article.
Here is more complicated. First, we write a unique article on the topic that we will promote.
I repeat, but if you intend to make readable texts, then you don’t need them in FIG!
The interface of the program is a little childish, plus a funny one advertising banner at the top, but it works pretty quickly and gives good results.
No installation required, just throw it on your desktop and work.
Hello everyone. I promised this week that I will write a post How to reproduce an article... How to make from 1 articles 1000? The time has come and we will do this with the help of special programs and usually written text.
There are specially trained people (freelancers) on the Internet who will take care of reproduction of your articles... Stop, why should we ask someone, after all copy the article you can do it yourself enough, read the instructions and act using already known methods.
News # 1 Pr of my blog has increased by 2.
News number 2 One of my blogs for some unknown reason received TIC 10. The blog was under the AGS. After hitting the filter, I did some work, namely: completely delete the hosted site and URL, reinstall the blog, add a new description. Currently there is only 1 page in the index. The blog address is here. Who knows what is the reason for the growth of the TIC?
What does it mean to copy an article?
Multiply- Means to make 100, 200, 1000 pieces from one article, all of them will be unique for search engines. This method is great for promoting your site with articles. There are many resources on the Internet that, both on a paid basis and for free, will accept your articles and post them on their resource. Search engines consider links from articles to be more weighty and thematic, so it makes sense to copy articles.
How to reproduce an article
In a few steps I will try to explain to you how copy the article:
1)
First you need to write an article 1000 - 3000 characters
2) Each sentence must be written with new line
3) For work, we need third-party programs:
- SEO Anchor Generator - In this program, we will create a template for reproduction of articles.
- Generating The Web -In this program, using the settings, we will take away articles that are unique to search engines
I have prepared for you an archive in which I have folded everything necessary to copy the article... it SEO Anchor Generator and Generating The Web and a free base of article directories. The archive can be downloaded.
4) Opening the SEO Anchor Generator program - start creating a template:
For example How to (create | make) a website, we will receive 2 offers
- How to create a website
- How to make a website
Copy your article into the editor using the combination (|), insert synonyms, for example, the word reader can be replaced with (user | user | visitor), so you need to replace everything, if possible, by putting synonyms. The more synonyms you use, the better.
5) Open Generating The Web and copy the already prepared template there
We need to configure the program:
- We set the number of 10,000 options
- Generation type random
In the option, we need to select the length of the shilling and the permissible percentage of similarity.
The most optimal for a 5-word shingle and 7% similarity, then press the generate button.
To be honest, the generation takes a very long time from 4 - 6 hours, you can stop it, and you will get 1000 or more articles on publication. We don't need so much, about 30 - 50 unique articles will be behind our backs.
Then we save the articles.
Generating The Web allows you to automatically add links. You can read all this in the documentation, everything is detailed there.
This is the easiest way to reproduce articles. There is also a second method, but it is more complicated and time-consuming. Everything is done in the same way as in the first method, just one more item is added.
For each sentence, 2 rewrites are done, i.e. 2 times the sentence is rewritten in a completely different way, but with the preservation of the meaning. And then everything is compared, and you get your article, rewritten 3 times. This is a complex process, so I think it is not necessary.
So you can reproduce the article.
To consolidate the skills, I provide a Video lesson how copy the article: Working with SEO Anchor Generator, review the tutorial carefully. It is useful for writing a description about yourself, writing a review for directories where you are allowed to add links.
Hello everyone! Today I will tell you how to reproduce articles. Duplication of articles is in great demand nowadays, and optimizers are ready to pay decent money for high-quality work.
Duplicating articles means getting multiple copies that are unique in the eyes of search engines. Why copy articles? This is done in order to promote the resource! Article promotion is very effective way promotion of the blog.
How does article promotion work? You write or buy an article, it is desirable that its subject coincides with the subject of your site. Make several copies of one article. Insert the links you need into them, and place them in various article directories and on blogs of similar topics.
After such an article is indexed by search engines, it will give a good impetus in promoting your resource. But here it is important that the reproduced articles are complete, at least 1000-2000 characters, and each copy is unique. I wrote how to check an article for uniqueness.
Article promotion is somewhat similar to link promotion, but the main difference is that you can write an interesting optimized article in which links will look the most natural for search engines and, accordingly, the effect from them will be much greater. Much will also depend on the quality of the site on which the article will be posted. You can read about all the nuances associated with quality links, everything is detailed there. This is, in short.
In more detail about article promotion, I will write separate posts, therefore, so as not to miss anything. And we move on. As I said at the beginning of the post, you will have to pay a decent amount of money for quality reproduced articles. There are special services for reproduction of articles on the Internet, where the average price ranges from $ 5 per 1000 characters.
I agree that you can give this money when you need to make 2-3 copies, but when you want to get, for example, 100 unique copies from one article, you will have to fork out, which not everyone can afford. In this case, you can use another method that will allow you to make reproduction of articles for free.
I must say right away that this method takes a lot of time and effort. you will have to do everything yourself, but when the budget does not allow using third-party services, you do not have to choose. And now we will talk about it in more detail.
How to reproduce articles
For this method, you will need time, desire, the article itself and special programs for reproduction of articles. And if you have the time and desire, then let's get started. First of all, we write a good optimized article, for 2000-3000 characters. In it, you should foresee several in advance, which will be link anchors leading to those pages of your blog that you want to promote to the TOP.
Who does not understand what I am talking about, imagine that you are writing a regular post on your blog. Are you all familiar with interlinking? If not, read it. So, while writing a post, you insert several links into it that lead to other internal pages of your blog. Each link has its own anchor, which we will change when duplicating articles. I think it's clear now. If not, ask questions in the comments.
After the article is written, we proceed to its reproduction. I use two programs to reproduce articles. The first program I use to write my template is called SEO Anchor Generator. You can download it absolutely free. And the second program, which is also distributed free of charge, is called Generating The Web. This program allows you to generate and select the most unique copies of duplicated articles. You can download it.
Launch SEO Anchor Generator and copy your article into the input field. The program works in such a way that while generating copies, it substitutes synonyms instead of words in your article, which you will need to choose yourself. And the more you pick them up, the better the result will be.
For clarity, instead of an article, I wrote several sentences, and I will show reproduction using their example. This is how it looks initially:
Select the section of the text for which you want to find synonyms. Press the "Input Wizard" and enter all the synonyms that come to mind, each with new line... It is advisable to do this so that the meaning of the sentence does not change. Below you can see a preview of everything that happens. The more you pick up synonyms, the more options for reproduced articles you will receive in the output. So, have entered the words, click "Insert".
And in this way, you need to go through the entire text. I quickly multiplied my mini-article and this is what I got:
As you can see from the screenshot above, all the synonyms I have entered are separated from the main text by curly brackets, and between themselves by a forward slash (|). This is the principle of separation of synonyms in almost all programs designed to reproduce text. I think the meaning is clear.
This is a very painstaking job and can take a long time. It sometimes took me a whole day to reproduce one article of quality quality. After the synonyms for the entire text are selected, press the "Generate" button. The program will give you all the generated copies, but the uniqueness of most of them will be very small.
To fix this, you will need to delete the most similar copies:
To do this, click the "Remove Similar" button and set the following settings in the pop-up window. The uniqueness of the article is calculated using a special shingle algorithm. If you are interested, you can read about this algorithm on the Internet, but I will show you the most effective settings.
Put the round pieces in front of the item "Shingle method", set the length of the shingle - 5, the maximum% of similarity - 7 and click "OK". The program will give you the most unique copies:
In principle, you can stop at this, but as I mentioned above, there is another program that is more suitable for generating unique posts. Open Generating The Web and copy the entire generated SEO Anchor Generator template into the input field:
And the final touch to be done is to make some adjustments:
- Set the required number of copies, I usually set it to 100.
- Set the generation type to "Random".
- Be sure to check the box next to "Remove Similar".
- Go to the "Options" tab.
- Set the round pieces in front of the item "Removal by the method of shingles", the length of the shingle is 5, the permissible percentage of similarity is 7.
- Click OK.
- Click Generate.
Now you can rest a little or do other things, because the program will fall into a long process of selecting unique posts. Generation can take 3-5 hours or more. But you can always stop the process by clicking on the "Stop" button. This is done if 10-20 duplicated copies are enough for you. If not, you have to wait.
After finishing the generation process, save the project and copy all the resulting copies into a separate document. Then it will remain to go over the multiplied copies to put down the links you need. And you may have to correct some parts of the text that turned out to be difficult to read.
When everything is ready, look for sites where it is possible to post your article with a link and post. You can find them by entering the query "Free article directories" in the search box. And if you want the quality of the sites to be at their best, then you can use the paid option for posting articles.
One of these is the well-known article exchange Miralinks. You can read more about it. The principle of operation is similar to link exchanges, only articles are posted here. You can go and register on the exchange. You can also buy an article there, if the budget allows.
Now you also know how to copy articles yourself and what all this is for. I hope my post was interesting for you and the reproduction of articles will not cause you any difficulties. I say goodbye to you on this. I wish you a great mood and successful promotion. All bye and see you soon.
How do you like the article? Have you had to copy articles? Perhaps you know of easier ways? I look forward to your comments!
If you seriously decide to start promoting your site with the help of content, for which I personally use the exchange, then you should understand that it will not work to post links on other sites in only one article, since search engines will not take into account the link weight of a page with the same content.
For this, we have to make 1000 unique articles out of 1 using the method of article duplication by special services or programs.
In order not to write many rewrites of one post, it will be easier to multiply it and below I will show how this can be done in simple ways in a few minutes.
Reproduction of articles- this means making sure that 10, 20, 100 options are obtained from one article. In this case, the resulting text on the output must be unique.
I hope that you understand the importance of unique posts, and if not, then wait for the "" filter.
What is the essence of the method: you write one unique article and do several rewrites of each sentence, and also select several synonyms for all words. You pass the compiled template through the program, as a result of which the program will generate new articles, automatically replacing words with your rewrites of sentences and synonyms.
How to reproduce an article
1) First of all, we write a unique article. In order to check its uniqueness, there are a huge variety of services on the Internet that provide this service.
For me personally, it is much more convenient for me to use the program. I insert an article there and select those in the settings search engines in which you want to check it. I mark everything.
Next we press "Check uniqueness" and if your article has it from 90% and more, then everything is super, you can go to step 2.
2) Now download the program SEO-Anchor-Generator(link checked, no viruses found). With its help, we will reproduce future articles. Delete the template that is there by default and insert your text there.
3) Now we will select synonyms for each word of the given text. The program works according to the following principle:
An example of my text template:I am the (author | creator | developer) of a blog.
As a result, the program will generate three sentences:
That is, the program takes words that are close in meaning from parentheses and substitutes them in new sentences. In order to write down synonyms, select the word and click "Input Wizard".
In this window, write synonyms for the selected word or phrase from a new line and press the "Insert" button.
The main thing is to choose such words as possible so that the meaning of the text does not change. The more synonyms you write, the more the program will be able to reproduce articles.
From my own experience, I was convinced that even two or three words are enough to get a lot of rewrites at the output.
As a result, we have all our synonyms enclosed in such brackets "()", and between themselves are separated by the sign "|" ... New articles will be generated from these words in brackets.
Click "Generate" so that the program starts to substitute words from "()" into new sentences.
See the result.
4) Now select synonyms or phrases for each word in the text. This can take a very long time.
It even took me a whole day to reproduce one article, but believe me it's worth it, since search engines give more preference (they consider them more thematic and have more weight) links with surrounded by text. The more you can generate articles, the more you will get working links.
So in a few minutes, in a hurry, I redid my text:
After generation, I got a huge number of articles, but most of them are very similar to each other. Therefore, we press the button "Removing similar" and we filter out all the most repetitive articles.
But just in case, do not delete your template, otherwise it will suddenly come in handy.
That's all if it comes out a new version programs or there will be another way to promote the site to the TOP, you will be the first to know about this if subscribe to update blog by email.
These programs will make life easier for the optimizer on the web. The first time will be difficult, and then it will be easier and easier. This is how you can simply copy the article. Good luck!
Outline of the article:
Reproduction of articles can be applied anywhere and in any way, but it is often used in the following places:
- when posting articles on sites (using the article exchange).
- when cross-posting to social networks and blogs.
Since, now, time is spent on the weight of oil, then the multiplication of articles is applied. Right reproduced articles are unique and readable.
How to reproduce an article correctly? Everything is simple, we use: synonyms, phrases (2-3 words). A large number of variations for a word will give you a great deal of uniqueness in your text. It should be understood that there is nothing shameful in this, the articles are readable and unique. Accordingly, Yandex eats the text without problems.
I wrote about how to write articles correctly and.
To download the program, type in the search GENERATING THE WEB and you will find a bunch of sites offering to download the program.
Now let's look at an example. I'll show you how this is done in one phrase: “ Your organization needs written rules and guidelines for spending. ” We just put the sum brackets and the vertical separator and list the words. I got it like this:
Next, we choose according to what rules to leave the text from all results. I choose not very rigid, but at the same time to preserve the readability and uniqueness of the text. To do this, go to options => delete using shingles, set the ones you need or leave the standard ones (I leave the standard).
We put a tick - delete similar ones. We can also place links in the finished text (similar to the auto-link function in the Windows Writer live article program). And we see several articles at the output, for example this one:
“Your company organization needs written rules and guidelines for generating costs. - 100% unique offer.
Usually I use the program like this - I copy the article and use the cross-posting service to fill blogs, services that give backward external links.
In this article, I told you about reproduction of articles using the Generating The Web program... And also told what reproduction is used for.
My readers, if something is not clear to you in the article or you need to clarify something, unsubscribe in the comments, I will explain to you. Please ask questions, share with friends, learn.
Also, a video on the topic, talk about the reproduction of articles using a similar program:
Seo site audit
Website analysis for free
Internal website optimization. Tips for optimizing your site.