Bluetooth does not work on iPhone. IPhone does not find Bluetooth - reasons Bluetooth does not work on iphone 6

Finding Bluetooth in the gadget's settings, they are perplexed: it is known that you can transfer data wirelessly from iPhone only to other "apple" devices thanks to the function AirDrop... So why do you need Bluetooth on Apple devices?

Bluetooth on Apple gadgets is necessary primarily to connect various additional devices - namely:

In addition, the technology AirDrop uses a combination of Wi-Fi and Bluetooth, which makes it possible to wirelessly exchange data between owners of Apple devices. About technology AirDrop described in detail.

How to set up a Bluetooth connection

Immediately, we note that you can connect to the iPhone via Bluetooth devices made not only by Apple. For example, headsets from a well-known company Jabra perfectly interact with iPhones.

About whether the device is compatible with "apple" gadgets, you need to ask a consultant when buying. If you buy online, you should first make sure that the device supports profiles corresponding to a certain iPhone model on your own. The required profiles are available on this page.

Connect iPhone to device via Bluetooth as follows:

Step 1. Make sure both devices are charged and position them so that the distance between them does not exceed 10 meters.

Step 2. Activate the Bluetooth module on an additional device - how to do this is described in the manufacturer's instructions.

Step 3. On the menu " Settings"IPhone find the section" Bluetooth"And go to it.

Step 4. Move the slider next to " Bluetooth»Into an active position.

You can activate Bluetooth in another way: call the "Control Center" by swiping from bottom to top and click on the icon with the corresponding symbol.

The fact that Bluetooth is turned on can be recognized by the following signs:

  • Icon in " Control Center"Turned white.
  • A small Bluetooth icon has appeared next to the battery indicator.

Step 5... Wait for the iPhone to complete the search, and click on the name of the required device in the section " Devices» (« Devices»).

Step 6... Enter the PIN - you can find it in the documentation that came with the connected device. If you can't find the password (which is quite possible, since the documentation is compiled in the manufacturer's language), try simple combinations like 0000 or 1234 .

After the device is connected, the status opposite its name will change to “ Connected". In the future, you will not have to enter the password again - the iPhone will remember the pairing.

How to disconnect a device from Bluetooth

Disconnecting from Bluetooth iPhone should be done as follows:

Step 1... Go to the settings section “ Bluetooth».

Step 2... Click on the icon with the letter "i" opposite the name of the connected device.

Step 3... Click on the " Disconnect» (« Disable»).

The connection will be dropped.

If you no longer intend to use the device with which the iPhone is paired, you can delete the pair. For this:

Step 1... Click the " Forget This Device» (« Forget this device"), Which is located below" Disconnect».

Step 2. Confirm that you want to break the pairing - in the menu that appears, click on " Forget Device» (« Forget device»).

When you return to the previous iPhone screen, you will see that in the block “ My devices»The name of the disabled device no longer appears.

Is it possible to bypass the ban on file sharing via Bluetooth

Apple does not allow users to transfer data via Bluetooth for two reasons:

  • This violates copyright for music, programs, films.
  • Bluetooth transmission is unsafe - viruses can start in the iPhone system.

However, despite Apple's disapproval, it is possible to send files via Bluetooth - however, for this, you first have to jailbreak the device. Next, you need to download from Cydia one of three tweaks, each of which is paid.

Tweak # 1. iBluetooth... It is small in size (weighs just over 200 Kb) and very simple utility. To transfer data, you need to activate Bluetooth in the iPhone settings, then go to iBluetooth and select the image to be sent through this application. The user of the tweak is given a demo period of 7 free days - during this period the user must make sure that the program is effective. The price of the full version of the utility is $ 3.99.

Tweak # 2. AirBlue Sharing... This tweak is not cheap - it costs $ 4.99. However, users who are forced to constantly transfer files "over the air" will certainly be satisfied with the simplicity of this program. No settings are required - the iPhone owner only needs to long press on the desired file, and a window will appear prompting you to select the device to which the message will be sent.

If another user wants to send you a photo via bluetooth, on the screen of your gadget c AirBlue Sharing you will be prompted to accept the file.

Thanks to the tweak AirBlue Sharing the owner of the iPhone will be able to exchange data not only with other owners of "apple" gadgets, but also with users of Android, Windows Phone, OS.

Tweak # 3. Celeste 2... This tweak is the most expensive at around $ 7. Such a high cost is probably due to the fact that the program is integrated with the service Gremlin, which makes it possible to quickly transfer received files to the standard iOS media library. App available Celeste 2 in the repository BigBoss.

Image: modmyi.com

You can control the data transfer in " Notification Center". The application will notify that the sending has been successfully completed with a special banner.

Bluetooth not working on iPhone: what to do?

Bluetooth is a fairly simple technology, so the reasons why a Bluetooth headset does not connect to an iPhone are usually prosaic:

  • The user forgot to turn on the device or simply did not figure out how to do it.
  • The battery on the device or on the iPhone itself is low.
  • The user has placed the devices too far apart.
  • There is an obstacle between the devices, through which the signal cannot penetrate (for example, a wall).
  • An outdated iOS version is installed on the gadget, or the device is simply not compatible with the iPhone of this modification.

An iPhone user who has encountered problems connecting via Bluetooth is advised to restart both devices and update his gadget to the latest up-to-date version of the operating system (if necessary). If such measures did not help, you need to delete the created pair and establish a new pairing.

Conclusion

The main reason why users of mobile technology dislike Apple devices is closedness. Transferring data from the iPhone is as easy as from Android, it will not work: the Bluetooth of the iPhone is paired only with additional devices, such as headsets and wireless speakers, but it is impossible to use it to send / receive files.

However, computer craftsmen have learned to bypass this limitation - using Bluetooth "to the fullest" will allow tweaks sold in Cydia... Users who do not want to "break" the iPhone and spend money on additional software will have to be content AirDrop- a function that, alas, is not yet capable of boasting stable work.

If your iPhone does not see another iPhone via Bluetooth, and you do not know why. In this article, we will tell you what to do in this situation. Bluetooth is a wireless technology that connects your iPhone with BlueTooth devices, such as another iPhone, headphones, keyboards, or even your car.

There are many reasons why BlueTooth might not work with iPhone. And in this article, we will walk you step by step through the process of solving such problems. We'll explain why iPhone won't connect to BlueTooth and show you how to fix it.

There are a few things to do before your phone starts connecting to a BlueTooth device. First, make sure BlueTooth is turned on by swiping from the top to the bottom of the screen. The control center will open, then click on the BlueTooth icon. BlueTooth is on when the button is highlighted in blue.

Second, you need to make sure that the device you want to connect to is within BlueTooth range of your iPhone. Unlike WiFi devices, which you can connect to from anywhere, BlueTooth's range is usually limited to 10 meters. It is advisable to place the phone and the device close to each other in order to avoid problems associated with the BlueTooth range on your smartphone.

If your iPhone does not see another iPhone via Bluetooth and cannot connect to the BlueTooth device, try using another smartphone. If the connection also failed, most likely the problem lies not with the iPhone, but with the non-working BlueTooth device.

How to fix iPhone not seeing another iPhone by Bluetooth or device?

If your smartphone still can't connect to BlueTooth, you need to dive a little deeper to fix this issue. First of all, we need to find out what exactly caused the problem: the software or the hardware of the phone.

Let's check the hardware first: your iPhone has an antenna that connects with BlueTooth. The same antenna is also responsible for connecting to WiFi, so if, in addition to the problem with BlueTooth, you are simultaneously faced with the problem of connecting to WiFi. Perhaps the problem is in the hardware of your phone, but don't despair, we will still try to cope with this problem.

Follow our instructions step by step so that we can figure out why iPhone can't see another iPhone by Bluetooth.

Turn your iPhone on and off

First press and hold the power button to turn off your phone. In the slider that appears, select Power Off. Wait about 30 seconds and make sure your iPhone is completely turned off.

To power on your smartphone, press and hold the power button again until you see the Apple logo. After restarting your iPhone, try connecting to BlueTooth again. If everything remains the same, follow the steps below.

Turn BlueTooth on and off

Restarting BlueTooth can sometimes help fix small software issues that might be causing your BlueTooth connection to not work. There are 3 ways to restart BlueTooth on iPhone:

Turn off BlueTooth in "Settings"

Step 1. Open “Settings”.

Step 2. Click “Bluetooth”.

Step 3. Turn off BlueTooth, you will know it is off when the button is grayed out.

Step 4. Turn on BlueTooth by pressing the button again.

Turn off BlueTooth in Control Center

Step 1. Swipe down from the top to open Control Center on iPhone.

Step 2. Click the BlueTooth icon that looks like “B”. You can tell that BlueTooth is turned off by the gray icon in the control center.

Step 3. Click on the BlueTooth icon again to enable. You will see this logo if the activation was successful.

Turn off BlueTooth using Siri

Step 1. Launch Siri by holding down the Home button or by saying “ Hey Siri.“.

Step 2. To turn off BlueTooth, say “ Turn off Bluetooth“.

Step 3. To enable, say “Turn on Bluetooth.”

After restarting BlueTooth, check if the error has been resolved.

Turn on WiFi and airplane mode

Very often, the reason why an iPhone does not see another iPhone via Bluetooth can be eliminated by turning on WiFi and airplane mode. Try it. Open Control Center on iPhone by swiping down from the top of the smartphone screen.

Click on the WiFi icon and turn it off. Click on it again to turn it on. If that doesn't work, turn off WiFi and try using BlueTooth again.

If turning WiFi on and off fails to solve the problem, do the same with Airplane Mode via the Control Center.

Make your phone forget BlueTooth device

When your phone forgets the BlueTooth device, it seems to it that it has never been connected to this device. The next time you connect, the process will proceed as if these devices are connected for the first time. To make your phone forget the BlueTooth device:

Step 1. Open “Settings”.

Step 2. Click "BlueTooth" .

Step 3. Press the blue “i” next to the BlueTooth device you want to connect.

Step 4. Click “Forget this device” .

Step 5. When asked again, click "Forget device" .

Step 6. You will realize that the device has been forgotten when it stops appearing under the “My devices” tab in “Settings” -> Bluetooth.

Once your phone has forgotten the BlueTooth device, connect it to your iPhone. If you were able to connect the device, then the problem is solved. If you still have connection problems, we proceed to reinstall the software.

Reboot network settings

When you reboot the network settings, the data on your iPhone about all BlueTooth devices, WiFi networks and VPN (Virtual Private Network) will be destroyed. Rebooting the settings may fix some BlueTooth connection problems.

Make sure you know the password for your WiFi before rebooting the network settings, as you will have to reconnect to the WFi networks.

1. Open "Settings".

2. Click “Basic”.

3. Click "Reset".(Reset is the last option in Settings-> General).

4. Click “ Reset network settings“.

5. When asked, enter your password on the screen.

6. Your phone will reset the network settings and reboot automatically.

7. When your iPhone turns on again, the network settings will reboot.

After resetting the network settings, try connecting to the BlueTooth device again. Remember that all BlueTooth data has been deleted from your iPhone, so you will have to connect as if you are connecting to this device for the first time.

If all else fails, update iOS on iPhone

Most often, the problem of iPhone not seeing another iPhone by Bluetooth can be solved by updating the OS. More about that. If you have a problem with iPhone not seeing iOS update, see this problem.

Use the best BlueTooth alternative - SHAREit

If the problem iPhone does not see another iPhone via Bluetooth is not eliminated, and you need to transfer data to another iPhone, then you can use the alternative, which is many times faster than “SHAREit”.

SHAREit is one of the best apps for transferring files faster than WiFi without any network connection.

How do I use SHAREit to transfer files?

In this tutorial, I gave an example of transferring files between my Android Android phone and Windows PC. The same procedure can be applied when transferring files to any device such as Android, iPhone, iPhone for Windows, etc.

Requirements:

  • Devices designed to transfer files must have WiFi functionality. [WiFi only, no network connection required].
  • To start transferring files between one device to another, all you need is the SHAREit app installed on both devices. You can also download the SHAREit PC application for the transferred data.

How to transfer files:

1. Open the app on your Android device and select "Send" and then press "Allow now".


2. Now select the files you want to transfer. After you have selected the files, click "Further".
3. The app will now search for the nearest SHAREit device [nothing but your device].


4. Open the SHAREit app on your second smartphone or PC and press "Receive".

5. Now your phone app will show the nearest device. Click on the device from your phone to start sending files to your computer.

You can do the same to transfer files from your PC to your smartphone.

I hope you find this information useful. Share it with your friends on social networks. Let me know any problems via comments.

Turn pairing mode on and off on your device

Restarting pairing mode may also fix some problems preventing you from connecting to a BlueTooth device.

Almost every BlueTooth device has a switch or button that enables pairing mode. Press and hold this button to turn off pairing mode.

Wait about 30 seconds, then press the button again or slide the switch to turn on the device. Try connecting it to your iPhone again.

What to do if iPhone does not see another iPhone via Bluetooth after OS update?

We've talked many times about the importance of updating your phone to the latest version. The new version helps you fix many bugs and improves the security of your iPhone or iPad. But, sometimes, a new version can cause new problems. Users often report problems that appeared after upgrading to a new version of the software and problems with BlueTooth are among them.

Wait 24-48 hours after the update, and during that time try the solutions in this article. Turn on BlueTooth, WiFi, Airplane Mode, restart your iPhone, or reset your phone's settings. If all else fails, the only thing left for you is to perform a full reset of the device.

How does the repair work:

  • 1 We diagnose the delivered
    device you or our courier.
  • 2 We make repairs and also give a guarantee for newly installed parts. On average, repairs take 20-30 minutes.
  • 3 Get a working device yourself or call our courier.

There can be many factors that negatively affect the operation of certain options of the iPhone 6 Plus, including bluetooth. Among the main ones that the experts identify are: system failure, failure of the Bluetooth module on the motherboard, as well as damage to the antenna.

What to do if there is a problem with bluetooth?

If bluetooth does not work on the iPhone 6 Plus, first disable this option and restart the device. After the "reset", activate the Bluetooth function again.

This procedure helps to restore the phone in case of any system failure or complications in the operating system. Very often they occur if the phone is not rebooted for a long time.

In the event that the problem with the bluetooth remains, check that the settings of the gadget are correct. To do this, go to the "Settings" menu, where select "Bluetooth". There press the "i" key, then select "Forget" in the drop-down menu. Then you need to reboot again, and already pair with the required device in a new way.

IOS problems

But most often in a situation where bluetooth does not turn on, this method does not give the desired result, therefore experts recommend immediately resorting to resetting the network settings. This can be done in the menu of the main parameters of the phone, where select the item "General" and go to the section "Reset". There you will see the option "Reset network settings". After completing this operation, restart the device again. Note that you will not lose important information, but only delete the data on those networks with which the gadget worked before.

If, after the reset, the bluetooth still does not work, the problem may lie in a firmware failure, although most often this indicates physical problems inside the iPhone 6 Plus. Still, it is worth trying to restore the normal functioning of the smartphone using the iTunes application.

Connect your phone to your computer and update the firmware. You should reflash the device yourself only if you are confident in the quality of the software, because it is not uncommon for downloaded versions of iOS to have many damaged files, which ultimately will not give a negative result. Therefore, it is better to entrust the installation of the operating system to professionals.

Problems inside the iPhone

If this process did not give any effect, it means that the problem occurred directly in the hardware of the iPhone 6 Plus. So, as a result of various influences, for example, falls or bumps, the operation of the motherboard, bluetooth module or antenna may be disrupted in the device. In this case, it is necessary to replace the defective parts. It is simply impossible to correctly and efficiently repair the device yourself without the necessary skills and equipment. More often than not, such attempts end in even bigger problems. Therefore, if difficulties arise in the operation of a smartphone, it should immediately be delivered to the hands of qualified masters of our service, for whom it will not be difficult to replace the antenna on the iPhone or other important components.

We serve the employees of these companies

    • Let's fix Blutooth on iPhone in half an hour!

    Our service center for Apple equipment has been working in this area since 2009. This, together with the high professionalism of our employees and the most modern equipment, allows us to efficiently and quickly restore the functionality of devices, regardless of the degree of complexity of the malfunction. Repairing a smartphone will take no more than an hour. You can spend this time in a cozy waiting room with delicious coffee and high-speed Wi-Fi.

    If you can't connect an iPhone or other "apple" device, for example, to wireless earbuds for phone or to a car audio system, keyboard, etc., the first thing to be sure is the compatibility of the devices. If everything is fine with this parameter, and Bluetooth does not connect or works with big problems, try several solutions to the problem.

    To begin with, let's clarify that problems with Bluetooth often occur in outdated OS versions. Especially there were a lot of such problems in iOS 8. If your gadget needs an update, install it. If the problem persists, you have 5 options for what to do.

    Option number 1. Reboot

    The easiest and most painless. Turn off Bluetooth. Hold the Home and Power buttons at the same time until the screen turns off. Then the logo will appear. When the device boots up, activate the BT module. If that doesn't help, try ...

    Option number 2. Reconnecting a pair

    It is necessary to "forget" the device with which the problem has arisen. In the Bluetooth settings, press the i next to the desired gadget, tap "Forget this device" and confirm the action. Then try pairing again.

    If it didn't work, then ...

    Option number 3. Reset network settings

    A gentle option for the device. In this case, all data will be saved on the iPhone, except for those related to the network connection and, accordingly, passwords. Go to basic settings and select "Reset". In this item, check and confirm "Reset network settings". After rebooting, check if Bluetooth is working.

    Nothing changed? Use heavy measures.

    Option number 4. System Restore

    Try to reset your system and restore to factory settings. This can be done through iTunes, but it can also be done through the settings in the iPhone. If you choose to restore through the "Reset" folder in the main settings, you will be able to specify the appropriate parameters. But even if you reset all the settings, the media will remain.

    But if that didn't help either ...

    Option number 5 (extreme case)

    You will have to contact Apple service or technical support. Probably the Bluetooth module itself is broken. In this case, professional diagnostics and repairs are required.