Ipad stopped turning on what to do. What to do if iPad won't turn on. Causes of breakdown and elimination methods
Greetings, dear users and undoubtedly happy owners of an iPad - an Apple tablet computer based on the iOS operating system (at the time of this writing, the latest version is the eighth). If you are the happy owner of any gadget from Apple, for example iPad (2,3, Mini, Air), then most likely you are already accustomed to its stable and reliable operation, and for you the fact that the gadget does not turn on leads to dead end.
Those people who have never used tablet computers other than iPad (2,3, Mini, Air), probably, do not know that during the operation of the device any difficulties or problems may arise, for example, the device does not turn on.
In today's article, we will analyze the situation when the iPad (2,3, Mini, Air) does not turn on. Those. the device does not react when the “turn on” button is pressed, and even an apple on a glass, black screen does not light up.
Faced such a situation? Do not rush to panic and look for a screwdriver so that (2,3, Mini, Air), in general, I categorically do not advise you to disassemble the tablet computer yourself in case of problems, you cannot correct the situation, but you can do even worse. Moreover, if the iPad (2,3, Mini, Air) does not turn on, then this problem in ninety-nine percent of cases can be solved, literally, in five minutes. Below I will tell you what actions you need to take to do this.
Method 1
I, of course, assume that now there will be a lot of disgruntled exclamations, but believe me - the action described below is the first thing to take in a situation where your iPad (2,3, Mini, Air) cannot be turned on. Perhaps it just ran out of battery power. If you have not tried this method to “reanimate” your device, then do it right now - connect your tablet computer to a power outlet.
If this method did not help and the device does not turn on, go to the heavier artillery.
Method 2
The next step that needs to be taken to reanimate your Apple device (in fact, in this way you can bring back to life not only the iPad (2,3, Mini, Air) tablet computer, but also the iPhone smartphone) is to press and hold two buttons at the same time: button power on / off device and the Home button (the round button at the bottom of the inside of the Apple device). Press and hold these two buttons simultaneously for at least ten seconds. If after this time the apple does not burn, then move on to the next method to make iPad work.
If the apple is on fire, then everything is in order (the gadget turns on), and your iPad or iPhone smartphone will work after a certain amount of time (a few seconds).
Method 3
If the previous method did not help and the device still does not turn on, then use a more radical method, namely, restoring the iOS operating system using iTunes. This is done very simply, follow the steps described below.:
- Connect your device (iPad tablet or iPhone smartphone) to a personal computer using a USB cable, this cable must be included with the Apple device;
- ITunes must be installed on the computer to which you connect the device. If this program is not on your personal computer, then you need to install it. You can do this using this link -
Falling as a result of careless handling, short circuit due to water ingress or failure of one of the apparatus modules turns it into a "brick". What if the iPad has a black screen and the device won't turn on? Let's try to figure out the causes and remedies for the malfunction.
Why the screen went blank
If your iPad falls and the screen does not turn on, then the reason most likely lies in mechanical damage to one of the modules. Chips and cracks on the case or display confirm this. The screen unit, as the largest element of the device in terms of area, is most often damaged. If there are no other breakdowns, then it is simply replaced in the conditions of the service center.
It is quite simple to check the performance of other modules - restart the device while holding down the "Power" and "Home" buttons. If there is sound, but the image still does not appear, contact a specialist.
Other reasons:
- discharged battery of the gadget;
- mechanical damage to the "Switch on" button;
- damage to the motherboard;
- short circuit;
- software crashes.
Note. If the tablet screenextinguisheddue to moisture or after dropping the device into water, do not try to turn it on, and immediately contact the service center.
Solutions
If the ipad does not turn on (black screen), then there is a high probability of serious breakdown. But there are three easy ways to return functionality to the device. Try:
- Charge the tablet by checking the charger's operation. Perhaps the device is simply discharged.
- Perform a hard reboot by simultaneously holding and holding the Power and Home buttons for 10-15 seconds.
- Perform the recovery procedure using iTunes. To do this, connect your iPad to your computer, launch the program, wait until it detects the tablet and start recovery. The operation takes 15 minutes.
If you managed to reanimate the gadget, but the problem recurs periodically, then there is a high probability of damage to the internal components or the printed circuit board. Contact the service center.
Professional repair
If it was not possible to restore the device to work, then you should also use the help of specialists. At Zamena-iPhone you can get qualified services for the maintenance and repair of the iPad in St. Petersburg. Works are covered by Apple's warranty. Thanks to the experience of the craftsmen, the use of original components and specialized tools, the functionality of the device will be fully restored, and you will be saved from spending on buying a new one. Call us!
The most effective ways!
iPad is voted the best and most reliable tablet. Even older iPads perform well after years of heavy use. However, iPad may experience crashes, such as a tablet may stop turning on... What to do if iPad won't turn on? In this manual, we talked about the most effective and efficient ways to solve the problem.
iPad won't turn on? All the most effective ways to solve this problem are described below. We recommend that you follow one by one from the first to the last - at one of the stages, your iPad will work again!
1. Check the cable and charging adapter
The first step is to make sure the iPad is not turning on because the battery is running low. Many will be surprised, but often the problem is really that the iPad is completely discharged, but does not charge due to a broken cable or charger.
It's easy to make sure the problem isn't with the accessories. Try charging another device, such as an iPhone, using the cable and charging adapter. If charging starts, then the accessories are not damaged and you can proceed to the next methods.
2. Make sure the iPad connector is not clogged
Also, quite often the iPad does not charge, and at the same time does not turn on, due to the fact that the charging port of the tablet is clogged. This happens most often on old tablets that have been in active use for several years.
Clean the charging port, for example with a toothpick. It is important to proceed with care and use gentle strokes to remove accumulated debris from the connector. In especially advanced cases, a lot of debris accumulates in the connector, for example, as in the image below:
After cleaning the connector, try charging iPad again. If the iPad does not turn on now, we turn to software solutions to the problem.
3. Hard reset iPad
Let's start with the simplest way to bring the iPad back to life, which is often a lifesaver. It's not uncommon for iPad to not turn on due to a software error that needs to be reset. This is very easy to do - you need to perform a so-called "hard" reboot.
To do this, on the iPad, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the tablet screen (10-15 seconds).
If the Apple logo appears - iPad is saved! The tablet will turn on and work as before. If the "hard" reboot did not lead to anything, then you should proceed to the following methods.
4. Enter iPad into recovery mode
The next effective way to solve the problem is to activate Recovery Mode on iPad. Successfully putting the iPad into recovery mode will bring it back to life with iTunes.
In order to enter iPad into recovery mode, you must follow these steps:
Step 1. Press the " Home»On the iPad and while holding it, connect the tablet to the computer using the USB cable.
Step 2. Continue to hold the " Home»Until the iTunes logo appears on the iPad.
If the iPad reacts and goes into recovery mode, you will have the option to restore the tablet to working condition.
After entering iPad into recovery mode, you need to launch iTunes. As soon as the program starts, it signals that the iPad is found and suggests updating or restoring the device.
First of all, you need to try to update the iPad, as in this case it will be possible to get rid of the problem without losing data. However, if your iPad has previously been updated to the latest version of iOS, then, of course, it will not be possible to update it.
In this case, all that remains is to select the "Restore" item. After restoring, iPad will start to turn on, but all data on it will be deleted. This method is only recommended if you've recently backed up your iPad data.
5. Restore iPad in DFU mode
iPad won't turn on despite all the above methods? Fortunately, the most effective way to solve the problem remains. It provides for putting the tablet into DFU mode and restoring its operation using a third-party utility to fix errors for iOS devices.
iPad won't turn on - restore via DFU mode
Step 1. Download the latest dr.fone utility from the official website of the program.
Step 2. Install dr.fone and launch the utility. It is important to close iTunes, however, as Apple's software will interfere with the recovery process.
Step 3. In the main window of dr.fone, select Repair... The utility allows you to fix various errors on iOS devices, including problems due to which the iPad does not turn on or is frozen in recovery mode.
Step 4. In the window that opens, click Start to start the iPad discovery process.
Step 5. Since your iPad will not turn on, the program will not detect it until it enters DFU mode. In the next window, the utility will notify you of this - click the button Device is connected but not recognized.
Step 6. In a new window, the program will ask you to enter iPad into DFU mode. For this:
1. Simultaneously press and hold the Home and Power buttons for 10 seconds.
2. Release the top Power button, but continue to hold the Home button for another 10 seconds until the utility detects your iPad.
If you did everything correctly, then your iPad will appear in the utility window:
Note that at this stage, dr.fone utility has the option to launch an interactive tutorial showing how to properly enter iPad into DFU mode.
Step 7. After successfully entering iPad into DFU mode, press Next.
Step 8. In the new window, click Download to start downloading the latest firmware for your iPad. The utility itself will download the required firmware version for subsequent recovery.
Step 9. After finishing the firmware download, it remains to press the button Fix now to start the recovery process. Make sure there is a check mark next to Retain native data installed - this parameter is responsible for saving all data on your device.
If none of the above methods helped, then, unfortunately, we are talking about a breakdown of the iPad. Moreover, the breakdown can be absolutely any - only in the service center will help to determine what exactly broke.
Any technique, even the most modern and advanced, tends to wear out over time and, as a result, become unusable.
The same is true for the iPad, the legendary tablet from California-based Apple. This mainly applies to outdated gadgets that should be replaced, and this rarely happens, but, nevertheless, the problem exists and it needs to be solved.
IPad won't turn on: what to do?
First you need to find out what happened to your gadget. The tablet may stop turning on for various reasons, including both technical breakdowns and software problems (which is less common).
To find out this question, you need to try to turn on the gadget and see how it reacts to your actions.
Problems with charging the device
It so happens that the iPad does not turn on, only the low battery sign is on, requiring a connection to the power source. The solution, it would seem, is obvious - to charge the tablet, but what if this does not happen even after connecting to the mains? In this case, with almost 100% probability, we can talk about a faulty charger that needs to be replaced. Otherwise, the problem may lie in the port (to check for sure, you can purchase an inexpensive Chinese wire, at least once it will work and let you know if the port is in order or faulty), which cannot be replaced, since it is part of the motherboard. And its replacement is a very expensive repair, and it is difficult to find such a part (you need a donor gadget). So if your iPad 2 won't turn on, consider updating your device. Probably, this tablet has been in your possession for several years, and parting with it is much easier than repairing it.
In some cases, the iPad will not turn on even when it is charging and the tablet does not complain about the lack of an electrical connection. The problem may lie in the battery of the device, it is damaged and also requires replacement (this problem is often accompanied by “blurring” when you press the display with yellow spots in the corners of the screen, sometimes even glass protruding from the body). It is unlikely that it will be possible to replace it on its own, this process is time-consuming and requires a certain skill, therefore it is better to turn to experienced specialists.
Program error
It often happens that the iPad does not turn on, and the iTunes logo is displayed on the screen. Everything is simple, there was a failure in the system. In fact, it is very difficult to achieve this, since iOS is one of the most secure and stable operating systems, but some disregard for the operating rules of iOS, such as rebooting the device during the update or “jailbreaking” it, can lead to this kind of behavior of the gadget. ...
So, we roughly found out: if the iPad does not turn on - what to do? Regardless of the reason for the failure, one thing is for sure: do not panic, everything can be restored on your own (here the closed and secure operating system from Cupertino will just work). The state your tablet is in is called “recovery mode,” and all you need to do is connect your iPad to a computer with iTunes preinstalled. Please note that you must use a certified cable to use your tablet with iTunes, as non-certified cables may not be detected by the device. iTunes will automatically detect the problem and offer to reinstall the operating system, you just need to wait for this process to complete by itself, after which the iPad will reboot and be ready to use. You can restore your data from a previously prepared copy and the iCloud cloud.
“Recovery Mode” can be manually invoked if your iPad won't turn on and freezes during boot (endless boot on apple logo). To do this, you need to hold down the "on-unlock" button and the "Home" button until the image disappears from the screen. After that, you need to press the "on-unlock" button and hold only the "Home" button, continue until the iTunes logo appears.
Instead of a conclusion
As you can see, the iPad does not turn on for various reasons, in most cases they are associated with hardware problems that are solved by repairing and replacing individual components. Software errors are corrected in a semi-automatic mode. This material will help you identify the problem and fix it as soon as possible.
Sooner or later, some part of iPad users are faced with such a problem. Their iPad won't turn on... Moreover, this attack does not bypass users of both the first tablet models and the newfangled iPad Air, iPad mini 2, etc. What to do in such cases? Let's try to figure it out together.
To answer the question, we need to try to understand why this could happen.
1. The most commonplace reason is iPad runs out of power(the battery has run down). As a rule, in such cases, the iPad has enough charge to show you an empty battery (but sometimes we don't even see that). In any case, if you see only a black screen, I advise you to connect your iPad to a power source and wait at least 5-10 minutes (Apple recommends charging at least 20 minutes) for it to charge at least a little. Then try to turn it on.
If a red battery appears on the screen, this is a sure reason that the iPad is low. Just charge it. If it does not charge, then try changing the power source (change the USB input, if you charge from a computer, change the outlet, change the wire, etc.)
2. The second most popular reason is iPad won't turn on after jailbreak(or installing some tweaks from Cydia). And the third reason is that some kind of unexpected glitch in the system(As a rule, this does not happen by itself, so this happens less often). Often this is accompanied by the appearance of a white apple on the screen or a wire, hinting about the need to connect to iTunes.
a) Hard restart iPad. To do this, press the Home and Power buttons at the same time on the iPad. Wait about 10 seconds. Even if there was an apple (or any other image) on the screen at that moment, it will disappear. This means you have completely turned off the iPad.
Turn on iPad by pressing the Power button.
b) If after a hard reset the iPad still does not turn on, then only restoring the iPad will help you. In other words, a complete flashing of the device. But do not rush to run to the service, this procedure can be done at home.
These three articles are enough for you to feel confident and restore your iPad without any problems.
The only warning: after restoring, you will lose all your data if you do not make a backup. Be sure to try making a backup in iTunes on your computer, if possible and the iPad allows you to do it ().
If iPad still won't turn on
If all else fails, then you need to contact an Apple service center for a solution to the problem. Apparently, something serious has happened to your tablet. In this case, I can only wish you good luck ...