The iPhone does not catch the network well. If the iPhone does not pick up the network; The iPhone 4s does not pick up the network well

Apple specializes in the production of high-quality gadgets that have everything you need for efficient work and entertainment: performance, multimedia potential, a good camera, etc. The iPhone line is one of the most popular in the world and is distinguished by the highest quality workmanship.

But even these smartphones sometimes fail. One of the most common problems is situations when the device does not catch the network well, as a result of which the quality of communication deteriorates sharply, and the ability to use the Internet disappears.

Why is the iPhone not picking up the network signal?

Among the most common problems associated with the problematic definition of GSM networks, the following are worth highlighting:

• the smartphone was recently flashed (especially if it was done independently);
• the device has been poorly repaired;
• a factory reset has been performed;
• incorrect date and time.

Also, the iPhone may not recognize the network if it has not been used for a long time. Sometimes this happens after incorrect installation of software functions or even during bad weather conditions. If you are in an area with a good signal, but the connection is still at a low level, then the problem lies in the GSM antenna, which could be damaged due to mechanical damage, exposure to moisture or other factors.

What to do if the iPhone detects the network poorly?

Faced with a similar problem, it is worth contacting the help of qualified specialists who work in our Total Apple service center. We will not only carry out free diagnostics of your iPhone, but also eliminate the cause of the GSM module malfunction in just an hour.

In addition, we give a three-year guarantee for the work performed and offer to use the system of discounts for regular customers. You can get your refurbished smartphone by delivery, which is carried out throughout Moscow for free.

Agree, it's so unpleasant when an important conversation is interrupted due to the fact that the iPhone 4s refuses to catch the network for some reason. It becomes simply impossible to normally receive and make calls. Quite a few owners of such an "apple" face this problem. How can we be here?

Why iPhone 4s may not pick up the network?

Among the main reasons why the iPhone 4s starts to catch the network poorly, there are the following:

1. Poor work of the mobile operator.
2. Smartphone settings are not correct.
3. iPhone 4s was flashed unsuccessfully.
4. The antenna is damaged.

What to do if iPhone 4s won't pick up the network?

Replace the SIM card first. Perhaps you should even change the operator. At the same time, the problem may lie in card wear or in the coverage area. If your iPhone 4s settings are incorrect, try resetting them and then reinstalling them manually. Poor firmware can make it difficult to use any feature of a smartphone, let alone network. You can competently flash an iPhone 4s using proven software only in a good service center. If the antenna is damaged, then it will have to be replaced with a new one. The antenna may be damaged by shock or moisture. It is also better to contact the service center with this question.

Who can help?

If you could not solve this problem on your own, then do not despair, but just dial our number or come to visit us. You will receive not only free diagnostics of your smartphone, but also prompt, high-quality, inexpensive repairs. Solving the issue with the network will cost you only 500 rubles. We will return your beloved iPhone 4s in fully working condition and we will provide you with a guarantee!

After unsuccessful manipulations with the phone (reinstalling the firmware, repairing or a long period of inactivity of the device), problems with the mobile operator's network may appear in the IPhone. The signal may be too weak or completely absent. If your IPhone stopped catching the network, use the following troubleshooting methods in turn.

Method number 1 - We take out the SIM card

The lack of an operator's network gives users a lot of inconvenience, because the ability to make calls, write SMS, etc. disappears. The first method is quite simple - you just need to turn off the phone and use a paper clip to get the sim card out of the case. Next, you need to reinstall the card and turn on the device.

This method allows you to prevent temporary communication failures. If the level of cellular communication has appeared, but very often changes (1-2 sticks are available), problems have arisen on the side of the telecom operator and it is necessary to wait for the signal from the towers to improve.

Method number 2 - Change the date and time

Often the correct display of the date and time is lost on the phone. This usually happens after replacing the battery. An incorrect date is the reason for the failure of certain sites, services, programs and the cellular network. To fix the problem, you need to configure the correct parameters manually:

• Go to "Settings" - the "General" tab;
• Click on the item "Date and time";
• In the new window, activate the "Automatic" slider so that the time is regularly synchronized with the global network. If the automatic configuration, for some reason, does not work correctly, configure everything yourself and save the changes.

Method number 3 - Updating or downgrading the firmware

If the above methods did not bring results, you need to exclude all possible problems that occur in the operating system. Remember at what period there were problems with connecting to a cellular connection. Have you installed OS updates before? If so, you need to roll them back to the previous version, as the new package contains bugs. You can reset the updates by connecting your phone to iTunes. In the main window, click on the "Restore IPhone" button and follow the further instructions.

If you have not installed updates before, the firmware installed on your phone may be out of date. Check for a new OS package in the Updates section of your smartphone settings. Perform an over-the-air installation of the new components and restart your phone. This will help resolve any interruptions when connecting to a cellular network.

Method number 4 - Enabling access to the cellular network

Make sure Airplane mode is turned off on your IPhone, as it will automatically block the cellular signal. You should also check the status of cellular data in the gadget settings. Go to Settings-Cellular. The slider opposite the Cellular data field must be enabled.

Method number 5 - Replacing the cellular antenna

If the breakdown is of a hardware nature, the only way out is to replace the cellular antenna. Open the smartphone case, take out the battery and remove the speaker unit as shown in the figure:

Remove the screws that secure the antenna to the unit. Then use the spudger to pry on the antenna loops. Then carefully disconnect it from the part and replace it with a new antenna. Assemble the phone and test the cellular communication.

Your iPhone bad catches network? This is a rather unpleasant situation, as it becomes impossible to make or receive calls. The first thing you need to pay attention to is whether the display shows at least some signal reception level. To do this, go to the phone settings and select automatic network search. If this does not work, then you can try to manually select the required network. If this did not help, and the network on the iPhone disappears, then it is best to contact our service center for help, where they will definitely help you.

In fact, the iPhone is constantly losing network for several reasons:

It happens when the poor reception of the iPhone 5, 4, 4s, 3g, 3gs is caused by the fact that the cell phone is locked to the operator of the country from which it was brought. In this case, when you insert a SIM card of any other operator, it simply will not work. In order to remove all these restrictions, it is necessary to reflash the device.

After unlocking, you will need to activate. All mobile phones purchased abroad are focused on the fact that a specific operator will receive payment for use. Therefore, it is not strange that they are locked for a specific SIM card. Obviously, if you change the card, the iPhone will simply stop working with the new operator. Naturally, our specialists will successfully solve this problem. You just need to contact our service center for help.

As you can see, there are many reasons why a mobile loses connection. Entrust the solution of this problem to the specialists of our service center. We employ professionals who have vast experience and will solve any iPhone problem as soon as possible, since we have a huge warehouse of original spare parts.

Often, after a fall, flashing or updating the phone, as well as replacing the SIM card, the smartphone does not catch the network. An inscription “no network” appears and, in fact, the device turns into a useless expensive “brick”. There are usually several reasons for this problem. Let's take a look at the most common ones, while focusing on the troubleshooting methods called "no network".

Incorrectly set time in the settings

This happens after updates and flashing, as well as after repairs in service centers. To fix this problem, you need to connect to a wi-fi network. Then go to Settings - General - Date and Time and activate the item Automatically. Restart your phone. Please note that these actions must be carried out being necessarily connected to a wi-fi network, otherwise the cellular network will not come to life.

Cellular operator settings and updates

Have you checked the date and time and the “no network” message has not disappeared? Perhaps the operator does not provide its services in the region where you are located. Then you can try to activate the "airplane" mode for a few seconds. We do the same if you are in your home region. It happens that the connection is "buggy" and you just need to restart it. You can also turn off and on the device. If this does not help, then you need to check the operator settings. Go to Settings - Operator and check if the Automatic mode is activated.

Do not forget about the update for the system. Connect to Wi-Fi again. Go to Settings - General - About this device. If updates are available to you, the operating system will ask you to install them. If Wi-Fi doesn't work, connect to iTunes. Then update your device to the latest iOS version.

Damage or failure of the SIM card

In the process of solving the problem of finding a network on your own, you should pay attention to the SIM card. Often, it can be damaged during cutting, it can fail if it gets wet or for other reasons. Take out the SIM card using the key in the box from under the phone, put the SIM card in place. Turn on - turn off the airplane mode several times.

The iPhone is blocked by the telecom operator

It happens that a gadget is blocked by a telecom operator for a SIM card of a certain operator. The phone simply does not support other SIM cards, it says “no network”. You can contact us at the service center, we can unlock by imei. As a rule, such a service takes from several days to 10 days, depending on which operator the device is locked to.

Damage to the antenna responsible for receiving the signal of the cellular network

Often there are cases when the iPhone stopped catching the network due to damage to the antenna due to shock, moisture and oxidation, previously carried out repairs, defective spare parts. To eliminate such a malfunction, you need to contact us at iConceptService, where qualified technicians will diagnose and be able to repair the device.

Damage to the modem part and eternal network search

If the modem part on the motherboard is damaged by shock or moisture, the phone will constantly search for the network and the modem firmware will be absent in the settings. To make sure your modem is not damaged, go to Settings - General - About this device - Modem firmware. If the field is empty, then your phone has received damage to the modem and only qualified service center technicians can help you here. You will need painstaking, complex work on the motherboard, which will allow you to restore the modem part and return the device to the ability to see the network. Our craftsmen have extensive experience in this kind of work, which allows us to carry out even such complex repairs.

Thanks! Your message has been successfully sent!