Firmware for OnePlus One. HTC ONE X. HTC ONE X Firmware - Step-by-step instructions
Attention!
For further manipulations, the device must be unlocked on the device. Also, this operation may lead to loss of all custom information and formatting the memory of the smartphone. It is strongly recommended to do backups All important data.
Installation Instructions
- fastBoot Flash Boot Boot.img
- fastBoot Flash UserData UserData.img (or userdata_64g.img for 64GB version) - Data on the internal memory of the device
- fastBoot Flash System System.img
- fastBoot Flash Recovery Recovery.img (if there is a custom recovery with compatibility of the installed version of the OS, then you can not sew)
- fastBoot Flash Cache Cache.img
- fastBoot Flash Modem Non-Hlos.bin
- fastBoot Flash Sbl1 SBL1.MBN
- fastBoot Flash DBI SDI.MBN
- fastBoot Flash ABoot Emmc_AppsBoot.MBN
- fastBoot Flash RPM RPM.MBN
- fastBoot Flash TZ TZ.MBN
- fastBoot Flash Logo logo.bin
- fastBoot Flash Oppostanvbk static_nvbk.bin
-
After completing the last step, enter " fastBoot Reboot"To reboot.
Create in the root of the disk with: \\ folder named " Android».
Download archive with firmware from here (the word must be present in the name fastBoot.) and unpack in the "Android" folder.
Open the command line and go to the created folder Android team " cD C: \\ Android \\"(Teams are written without quotes).
Connect the phone to the computer with using USB.-Cabel.
Make sure the computer finds the ADB device.
To do this, introduce " adB Devices."To the command line. On the request on the phone on the resolution of debugging on ADB on this computer need to click " OK.", When choosing the item" Always allow from this computer" If the device is seen, the text will be displayed. List of Devices attached»And the list of all devices (for example, xXXXXXX DEVICE). If instead of "Device" will be written "offline" or the list will be empty, then you need to update ADB, check the drivers / cord, change uSB port/a computer.
Reload your smartphone to bootloader mode.
For this it is necessary in command line introduce " adB Reboot Bootloader."Either turn it off, then turn it on, while holding the power button at the same time and the volume key to increase the volume.
Make sure that the computer finds the device in FastBoot mode.
To do this, enter the command " fastBoot Devices." If the device is connected correctly, the device identifier with the word "FastBoot" will be displayed (for example, " xXXXXXX FastBoot"). If nothing but dismissed waiting For Devices ... ", then you need to update the drivers, change the USB port, or try to do these steps on another computer.
Provided that the device is defined correctly in the command prompt to enter:
OnePlus One 64GB. Works under control operating system . Its productivity is estimated at 0 out of 5 (in its segment). This smartphone - needs additional evaluation. Here are the characteristics of the device, instructions, how to make a reset settings, flash the device and, of course, how to get root rights on the manager
Characteristics
- Standard: GSM 900/1800/1900, 3G, LTE
- LTE range support: Bands: 1, 3, 4, 7, 17, 38, 40
- Type: Smartphone
- Platform: Android
- Case type: Classic
- Control buttons: Touch
- SIM Card Type: Micro SIM
- Number of SIM-Cards: 1
- Weight: 162 g
- Sizes (shXVXT): 75.9x152.9x8.9 mm
- Screen Type: Color IPS, Touch
- A type touchscreen: Multitach, Capacitive
- Diagonal: 5.5 inches.
- Image Size: 1080x1920
- Automatic screen rotation: yes
- Scratch-resistant glass: yes
- Type of melodies: polyphonic, MP3 melodies
- Vibrating alert: Yes
- Camera: 13 million pixes., LED flash
- Video recording: yes (MP4)
- Max. Video Resolution: 3840x2160
- Front camera: yes, 5 million pixes.
- Video playback: MP4, H.263, H.264, RMVB, FLV720P
- Audio: MP3, AAC, WAV, WMA, Stereodynamics
- Dictaphone: Yes
- Headphone jack: 3.5 mm
- Interfaces: Wi-Fi 802.11ac, Bluetooth 4.1, USB, NFC
- USB charging: yes
- Satellite navigation: GPS / GLONASS
- Internet access: WAP, GPRS, EDGE
- Protocol support: POP / SMTP, HTML
- Volume of built-in memory: 64 GB
- Slot memory cards: missing
- Additional sMS functions: Text entry with a dictionary
- MMS: Yes
- Battery Type: Li-Polymer
- Battery capacity: 3100 mAh
- Sensors: illumination, approximation, gyroscope, compass
- Search book: yes
- Exchange between the SIM card and internal memory: there is
- Organizer: Alarm Clock, Calculator, Task Scheduler
- Complete set: smartphone, usb cable
- Features: cyanogenmod firmware Based on Android 4.4
»
Firmware for OnePlus One 64GB
Official firmware [stock ROM file] -
Caste firmware OnePlus -
If a custom or official firmware on the manager has not yet been added here, then create a topic on the forum, in the section, our specialists will promptly and free help. With backup and manuals. Just do not forget to write and reviews your smartphone - it is extremely important. This page will also appear firmware on OnePlus One 64GB. Please note that an individual ROM file is required for this model, so you should not try firmware files from other devices.
What are the Castom Firmware (Firmware)?
- CM - Cyanogenmod.
- Lineageos.
- Paranoid Android
- Omnirom
- Temasek's.
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK (Mokee)
- Flymeos.
- Bliss.
- crdroid
- Illusion Roms.
- Pacman ROM.
Problems and disadvantages of the smartphone from oneplus and how to fix them?
- If one does not turn on, for example, you see white screen, hanging on the screensaver or only flashes alert indicator (perhaps after charging).
- If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
- Not charging (usually, problems with iron)
- Does not see the SIM card (SIM)
- Camera does not work (for greater extent, hardware problems)
- Sensor does not work (depends on the situation)
Hard Reset for OnePlus One 64GB
Instruction how to make Hard Reset. On OnePlus One 64GB (Reset Settings). We recommend to get acquainted with the visual guide, which is called on Android. . 
Codes for resetting settings (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-\u003e Go to Recovery
- "WIPE DATA / FACTORY RESET"
- "Yes - Delete All User Data" -\u003e "Reboot System"
How to go to Recovery?
- hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
- the menu will appear with Android. Everything, you in Recovery!
Reset Settings on OnePlus One 64GB can be done in a completely simple way:
- Settings-\u003e Recovery and Reset
- Reset settings (at the bottom)
How to reset the graphic key
How to lose graphic keyIf you forgot it, and now you cannot unlock your onePlus smartphone. On the One 64GB model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.
- Reset graph. Locks -
- Password reset -
Today we will put a custom firmware for one of the best phones Companies - HTC One. X Review to which you can read on our website. In this instruction will give you the most more popular firmware on this smartphone, as well as let the reference, so that, suddenly, they could choose to choose the appropriate one. Go.
HTC ONE X firmware - step-by-step instruction
7. The next step will be the choice of Install Zip From SDCard -\u003e Choose Zip from SDCard -\u003e We are looking for where we dropped the downloaded firmware, select and press (do not clamp!) Power button on the smartphone.
8. Patience. We are waiting until it is established firmware on HTC One X.
9. When the installation will end something like "bla-bla-bla comboted".
11. You need to restart the phone: Go to the Bootoader menu: Advanced Power Menu -\u003e Reboot Into Bootloader
12. With help USB cable Attach One X to the PC, then open the command prompt (CMD) and register
press "ENTER".
13. Then we write in the same place:
and again "Enter".
14. Everything, a reboot remained, in the bootloader "e chosen the item" reboot ".
OnePlus is a sensational company that has loved to many for the year of existence. And everything is not just so, because its product is worth a special attention!
However, it will not be about this company, but about new firmware For their so far, the only device - which has become available today and download it can be on the official website.
Description.
There is no remarkable in the firmware. This is a naked AOSP with some caustomization capabilities. Namely:
- the ability to adjust the buttons in the curtain (move and turn off unnecessary), add new things yet;
- gestures on the screen turned off;
- its own file managerwhich also supports gestures;
- button simultaneously close all open applications;
- when you first download the smartphone, setting some parameters;
- as well as a set of their beautiful wallpaper (You can download them).
On the this moment This is all the "buns" of the branded OS from OnePlus, which, I am sure, is waiting for a big future and it will actively develop, because the work on it is leading the Paranoid Android (PA) team.
From myself I can add, and I use this firmware from the morning, the fact that it works is much shunter than night builds Cyanogenmod, the battery feels better, the camera is good, the connection is at the height. Immediately felt a responsible approach to work and good optimization.
Errors.
Also, it was not without jambs. At the moment there are some poorly working things, but they are negligible. Check out them:
- sudden Stopping Image Printing;
- sometimes it is impossible to complete the call using the console on the headset;
- OTG can recognize only file System FAT32;
- during the system update, the display of Wi-Fi / mobile notifications may be incorrect;
- during the system update, the display of the version number may be incorrect;
- sometimes a file manager fails when downloading files to the cloud;
- file Manager failure is possible when changing the name of the images;
- the file manager is still not supported by deleting multiple files immediately.
Installation of firmware is very simple. To install, you will need:
- Downloaded zip archive with firmware (weight about 720MB, Google Apps. already built)
- Castomnaya recovery TWRP.
- Backup. last firmware
- Ruth, at will
- And a little patience
The firmware is interesting and fresh. It works fast and good. This is a quality product, although not finished to the end. Is it possible to use it every day? My answer: "Definitely yes!"
It should not say that it is empty, few settings, etc., because it is just the first assembly. Remember how many settings from Nexus "s from the box, there is absolutely all pony.
In general, the firmware turned out to be good and I will follow its update and development, as well as the emergence of new opportunities that will undoubtedly be! What do you think about the new firmware from OnePlus, which should give a breath of fresh air to users of their smartphone? Thank you all for your attention!
Instruction How to flash the phone Chinese killer of flagships Oneplus 3 and Oneplus 3T on a new firmware (Android), getting ROOT rights superuser. Step-by-step instructions How to unlock the bootloader in the phone and install custom recovery TWRP Recovery and not the official custom firmware.
Official firmware OnePlus 3 / 3T
Need to download last version Oxygen OS or Hydrogen OS firmware (when moving from one to another, you need to download full version Firmware for OnePlus 3 / OnePlus 3T)
Full firmware for OnePlus 3 - Oxygen OS, Hydrogen OS V3 (H2 OS)
Full firmware for OnePlus 3T - Oxygen OS, Hydrogen OS Beta3 (H2 OS)
Connect the ONEPLUS smartphone to the PC and copied the firmware file to the phone's memory root.
The phone will reboot and go to the update process, waiting for the installation end and get started on the first launch new version OXYGEN OS or Hydrogen OS firmware.
If at the first start of the smartphone you have any problems (glitches, hangs, etc.), you need to go to the recovery and make full reset Smartphone OnePlus 3 / 3T to factory settings (Factory Reset), all data on the phone are saved.
Method number 2 How to flash OnePlus 3 / OnePlus 3T through ADB Sideload
Downloads the firmware for your smartphone on the link above.
Install on the PC driver for OnePlus 3 / Oneplus 3T, download ADB-SETUP-1.4.3
Reboots your smartphone to recovery mode ( recovery Mode.). To enter the recovery, turn off your onePlus 3 / 3T, and on the phone off, press and hold the power buttons and the volume down.
On the smartphone, the language selection menu will appear, choose understandable to you (it is this to me), then select the "Instal From USB" item confirm. At the end of our efforts, the smartphone should be the inscription "You A Sideload Mode"
Connect the onePlus 3 / 3t phone to your PC, after which you start the terminal on the PC (write "Command Line") and write the command there
adB Devices.
adb Sideload.
Where
Smartphone to install a new firmware after which it will restart independently, or press the reboot and wait for the apparatus
Unlock ONEPLUS 3 / 3T loader
Install on the PC driver for OnePlus 3 / Oneplus 3T, download ADB-SETUP-1.4.3
Run on your computer on behalf of the administrator ( Right button Mice, RUN AS Administrator).
Press 'Y' every time the installation program will ask.
We wait for the end of the installation.
After installation, it is advisable to restart the computer, including the driver for FastBoot and Recovery-MTP will also be installed.
On the phone we go to "Options for Developer" and allow the "factory unlock", there you can also enable the option of the advanced reboot and make the reboot in the bootloader (fastboot).
Then you enter the FastBoot mode mode, for this you need: Turn off the phone, hold down the volume key and the power key, after a few seconds on the screen it must be written "FastBoot" or "FastBoot Mode"
Connect the phone to the computer using a USB cable (preferably original, which goes along with the phone). Then open the command prompt window: Open the folder where ADB is located, for example C: \\ Android\u003e In the free place of the window, press SHIFT + Right Mouse Button\u003e Open the commands window "
In the command prompt, enter the following code:
fastBoot Devices.
This command will show a list of connected phones. If a serial number Your phone was highlighted, you can start unlocking the phone, if not, then you need to check and install the drivers.
We enter the following to the console:
fastBoot OEM Unlock.
On the phone, confirm the unlock in the menu that appears (control in the menu is performed by adjusting the volume and power adjustment) by selecting the top item - "YES".
In order to block the bootloader (bootloader) again, we go back the entire procedure, but instead of FastBoot OEM Unlock write fastBoot OEM Lock.
TWRP Recovery Custom Recovery Firmware on Oneplus 3 / OnePlus 3T
To install Castomal Recovery TWRP Recovery on the OnePlus 3 / 3T smartphone, you need to unlocked the bootloader (Bootloader).
Getting ROOT rights.
1. Copy the file "Update-SUPERSU-V2.76-20160630161323.zip" in the root of an SD card.
2. On the smartphone in the "Developer's" Developer Settings "section USB debugging"And" unlocking, provided. . OEM "
3. Go to TWRP (when the phone is turned off, clamp "HOME + VOL_UP + POWER").
4. Next, go to "Installation" and find on the SD card "Update-SuperSu-v2.76-20160630161323.zip", set.
5. Click "Restart in OS". Loading will be long enough, the phone may reboot several times, this is normal.
6. Checking availability root. Right.
7. "Developer Settings" do not touch - activated items do not interfere with anything.
After installing TWRP, you can format the "DATA" section to return to factory settings. TWRP and SuperSU will not go anywhere.
Installation of custom firmware on Smartphone OnePlus 3 / 3T
To install custom firmware on the OnePlus 3 / 3t phone, you need a custom recovery TWRP Recovery.If you do not have it. See above.
Download any custom firmware on PC which you liked, for example:
Then copy the firmware file in the phone's memory and turn off the smartphone. After that, you need to download the smartphone into the Custom Recovery TWRP Recovery (on the phone off the phone clamp the power buttons + button up Thunder. + Home)
And via TWRP Recovery Install the modified firmware file for OnePlus 3 / 3T
Go to Wipe point and choose Advanced Wipe
We put tick points: "Dalvik Cache", "System, Data", "Cache", "Android Secure".
Making "Swipe to Wipe"
Go to Install -\u003e Select the memory where the custom firmware lies, and choose Swipe to Confirm Flash, the installation will begin
After installing in the recovery, select the Reboot -System item and the device is rebooted.
Ready! You successfully launched a custom firmware! Restart the smartphone and use with pleasure (without paying for the bugs of custom firmware).