What Windows 7 performance index is considered good. Windows performance index or what "slows down" your computer? Maximum index assessment

One of the most important criteria that characterizes computer systemis its performance. Let's figure out how to increase this basic desktop reference rate or laptop with Windows 7.

Before we proceed to the question, how to increase productivity, let's see what it represents and what, in fact, we are going to raise. In Windows 7 has such a system indicator as "Productivity index". It is based on the assessment of individual PC nodes: processor, random access memory, graphics, graphics for games and hard disk. The general index is exhibited by the weakest link. But for a number of reasons, this assessment cannot be called unambiguous and many specialists relate to it quite critically.

Undoubtedly, the power of the above components directly affects the performance of a PC, that is, on the volume of processes that the computer can process per unit of time. Next, we will consider in detail ways to increase the return on these components to increase the speed of the OS as a whole.

Method 1: Increased hard disk performance

One of important factors Enhance operating system performance is the hard disk optimization. Many users pay minor attention to this factor, considering that windows are important, first of all, the amount of RAM and processor power. And in vain, because the slow hard drive slows down the work of the computer as a whole, since the other components of the OS are constantly referring to it to process files and other objects located on it.

First of all, you can produce cleaning hard Disk from garbage and unnecessary files, which will speed up its operation. This can be done both by the means of the system, and with the help of third-party specialized programs, such as CCleaner.

Increase a speed hDD worksSo, the performance of the system as a whole helps the operation of defragmentation of the hard drive. It can be performed using a special system utility or third-party defragmentation programs.

In addition, the HDD speed can be increased by producing it. proper setting in "Device Manager".

1. Click "Start" And go to B. "Control Panel".



2. Go to section "System and safety".



3. In block "System" Click on the inscription "Device Manager".



4. In the interface opened "Device Manager" Click on item "Disk devices".



5. A list of physical PCs connected to PC hard disks. This can be both one device and several. Produce double-click left mouse button ( LKM.) By the name of one of them.



6. The window properties window opens. Move to the section "Politics".



7. This indicates productivity policy. Hard drives different manufacturers Points in this section may differ. But, based on the general logic, look for the position that should contribute to an increase in speed. For example, "Allow caching" or " Optimal performance ». Noting this item, press Ok in the current window.

Method 2: Increase the amount of RAM

Increase system performance can also be by increasing the size of RAM. The most elementary and at the same time effective method To achieve such a result is to purchase an additional or more voluminous RAM bar. But unfortunately, it is not always possible both on financial and technical considerations, because 32-bit windows 7 support the size of RAM not more than 4 GB. But it is possible to bypass this restriction.

In order to increase the scope of RAM without changing the hardware configuration, the paging file on the hard disk that generates, the so-called virtual memory is created. When the RAM resource lack, the system appeals to this selected area on the hard drive. Therefore, to increase PC performance, you must enable specified fileIf it is disabled.

1. Click "Start"and then click right mouse button on item "A computer". In the menu that opens, choose "Properties".



2. The OS properties window will start. In the left of it, press "Extra options…".



3. In the shell opened, click on the button "Parameters…" In block "Speed".



4. The speed parameter window opens. Turn to the section "Additionally".



5. In block "Virtual Memory" Click on the button "Change ...".



6. Virtual memory control window opens. In the upper part of it, you can install a tick near the parameter "Automatically choose ..." And the system itself will select the settings for the paging file.

   But we advise you to set the parameters manually. For this, first of all, remove the checkbox from Chekbox "Automatically choose ..."if it is installed there. Then select the logical disk in the selection window where you wish to locate the paging file. Below rearrange the switch to the position "Specify Size". After this field "Original Size" and "Maximum Size" will be active. Put the same value of the desired virtual memory value in megabytes. Then click on the button "Set" and Ok.



7. In order for the entered settings to take effect, it is required to restart the computer.

It must be remembered that too large File Pads to create either should not. First, you, therefore, lose the workspace that could be used to store files. Secondly, the speed of contacting the hard disk is much slower than to the hardware RAM. Therefore, with an increase in virtual memory, it is possible to handle a larger amount of processes at the same time, but the speed is reduced, which negatively affects the performance of the system as a whole. It is believed that the optimal size is one and a half times higher than the volume of hardware RAM PC. We recommend setting the volume of the paging file based on this calculation. If you are already installed, we advise you to change its size on the optimal one.

Method 3: Disable graphic effects

It is no secret that graphic effects consume a significant part of the power of the video card, the processor and use a considerable amount of RAM. To free up the resources of these objects to perform other tasks and thereby increase the speed of the system as a whole, you can turn off some visual effects.

In addition, optimize resource consumption on the chart can also be using the video adapter control panel. The installation algorithm for the necessary parameters differs depending on the manufacturer and model of the video card, but the essence comes down to choose a performance between performance and quality or at least install the best balance for you between these two criteria.

Enhance the performance of the video adapter will also help the timely update of its drivers and the installation of special software designed to optimize the video card.

Method 4: Disable applications in autorun

Quite often, when installing the program, the programs are prescribed into autorun, thereby not only slowing the loading of the system, but also by consuming resources throughout the working session. But at the same time, the user does not always need these applications, that is, they often consume the resources of the OS. In this case, you need to remove such elements from the startup.

1. Type a combination Win + R.. In the window that opened:

   Apply Pressing the button Ok.



2. The system configuration editing window opens. Move in the section.



3. The startup section opens. Next steps depend on whether you want to disable automatic start All elements or only some of them. The first action of actions will bring a greater effect, but it must be borne in mind that there are such programs that are preferable to leave in autoruns specifically to solve your tasks. So there is a solution for you.



4. In the first case, just click on the button "Disable everything". After that, the marks opposite all the list items will be removed, then press "Apply" and Ok.

   

   In the second case, remove the ticks near those elements that are going to remove from the startup, but do not touch the marks opposite the names of the programs left in the autorun. Further, like the previous time, press "Apply" and Ok.



5. After that, the dialog box opens where the PC restarts will be prompted. Close all active programs and click.



6. After restarting, the selected applications will be removed from the startup, which releases the resources of the system and will increase its speed.

Method 5: Disable Services

Various started services are also carried out on the system. At the same time, not all of them are needed to the user, but from the actions of some of these objects of negative consequences even more than positive. Such elements are desirable to disable for increasing PC performance. The principle of deactivation is about the same as the principle of removal of programs from autoload. But there is one important reservation: it is necessary to treat services more carefully, since the deactivation of an important element can lead to incorrect work Systems.

1. Press "Start"go to B. "Control Panel".



2. Next, go to "System and safety".



3. Click "Administration".



4. In the list that opens, choose "Services".



5. Opens "Service Manager". Highlight the service that you want to deactivate, and then in the left side of the window, click "Stop".



6. Deactivation procedure will be performed.



7. After that, double click LKM. By the name of the same service.



8. The window of the service properties opens. In the drop-down list "Startup type" Choose a position "Disabled". Then make a pressure on the buttons "Apply" and Ok.



9. Return to the main window "Dispatcher"And the service itself will be completely deactivated. This will indicate the lack of status "Works" In column "Condition" opposite the element turned off, as well as status "Disabled" in a collumn "Startup type".

After performing the indicated manipulations to disable all unnecessary services, the speed of the system should increase due to the release of resources. But, we repeat, feel carefully at what service is disconnected. Before performing the procedure, see our separate material in which it is described which services can be turned off without significant negative consequences for the OS.

Method 6: Cleaning the Registry

Another way to speed up the work of the PC is cleaning system registry from outdated and erroneous entries. Thus, the system will not refer to the specified elements, which will increase not only the speed of its operation, but also the correctness of operation. For these purposes, special-cleaner programs are applied. One of the most popular applications for performing the specified task is already familiar to us by Method 1

For desktop PCs, this method is particularly suitable, as it does not have almost no negative consequences. But if you use a laptop, you need to think if it is worth applying it, as it can significantly increase the battery discharge rate.

Method 8: processor acceleration

By default, the processor is not configured to use its maximum features. It always has a power supply, and therefore there are methods of this power to free up to increase the performance of the OS. As a rule, they are carried out using special software. But it is worth remembering that the processor's acceleration is a rather dangerous procedure that, with incorrect exercise, can lead to a PC output. In any case, the processor dispersal leads to an increase in its wear, and with incorrect actions even to failure in the shortest possible time.

As we see, increasing the performance of the system in Windows 7 is carried out mainly by reducing the load on individual components. At the same time, it is often necessary to choose that the speed of work or visual appearance is more important. Although there are such methods where such a dilemma is not worth it, for example, cleaning a PC from garbage. In this case, optimization has only a positive character with the condition that you do everything right.

Index windows performance Defines the capabilities of the configuration of the equipment and software of the computer and displays them as a number called the basic value. A high base value usually means that the computer will work better and faster, especially when performing complex tasks that require many resources than a computer with a lower basic value.

Each component of the equipment receives its own subenode. The basic value is determined by the smallest. However, subcenters show how the most important components work, and helps to decide which of them need to be updated.

The overall assessment of the computer can be used when purchasing programs and other software that corresponds to this assessment. For example, if the overall assessment of the computer is 3.3, then you can buy any software designed for this windows versionwhich requires a total rating of 3 or less.

The current range of estimates is important from 1.0 to 9.9. Windows performance index is designed with further development computer technology. Since the speed and performance of the equipment are improved, the rating range will increase. Standards for each level of the index as a whole remain unchanged. However, new tests can be developed that will reduce the assessments.

To view the basic index of the computer

1. Open the performance management tool dialog box.
2. See the basic value and substallation windows performance index For your computer. If new equipment has recently installed, and you need to check, the overall rating has not changed, select Repeat estimates. If the subsyna and the overall rating are not displayed, select the command Rate this computer.

About the basic computer performance index

Evaluation reflects minimum system performance Based on the capabilities of various components of the computer, including RAM (RAM), cPU (CP), hDD, overall performance of graphics playback on the desktop and the ability to play volumetric graphics.

Below is a general description of the capabilities of computers with the specified base values.

Computer performance with a total estimate from 1.0 to 2.0 It is usually sufficient to complete the majority of general computing tasks (for example, to perform improved office performance and search on the Internet). However, a computer with such a general assessment as a whole is not enough powerful to work in Aero environment and to implement additional multimedia features available in Windows.

A computer with a total estimate of 3.0 It can work with Aero and many Windows 7 tools at a rue. Some extra windows 7 can only work in limited functionality mode. For example, a computer with a general estimate of 3.0 may display windows theme 7 resolution of 1280 × 1024, but hardly execute this topic on several monitors. Or can reproduce the contents digital televisionBut hard to reproduce high definition television (HD-television).

A computer with a total estimate of 4.0 or 5.0 Can perform new windows Apps 7 and support the execution of several programs at the same time.

A computer with a total estimate of 6.0 or 7.0 It has a quick hard disk and can implement calculations with a large volume of graphic operations (for example, a game on several participants, surround game graphics, as well as recording and playing HDTV content).

If a separate program or work windows systems 7 requires a higher value than the existing basic value of your computer, you can increase this value by updating the equipment. To check if the base value has changed after installing the new equipment, select Research Research. To learn more about the hardware on your computer, select View and Print Details.

Substations of the index of the computer

Substations are the results of checking the possibilities of RAM, CPU, hard disk, overall productivity Recruitment of graphics on the desktop and components of the equipment of the game bulk graphics on the computer. If the overall assessment is not sufficient to perform a specific program or work in Windows, you can determine which components to be updated.

The basic value is a good indicator of computer performance. With the help of subtlety, you can determine the level of computer performance when performing individual tasks:

• Productivity of programs Microsoft Office. . If the computer is used mainly to work with office programs (for example, a text editor, spreadsheets, e-mail and for watching web pages), then high subsyna for the central processor and memory are needed. For desktop graphics and volumetric graphics, supremacy with a value of 2.0 or higher.
• Games and applications with large scope of graphic operations. If the computer is used for games and programs with a large volume of graphic operations (for example, for digital video editing programs or realistic games with first-person presentation), then we need high subsyna RAM, desktop graphics, surround game graphics and a central processor. Subsalue 3.0 or higher is usually sufficient for the hard disk.
• Possibilities of the media center. If the computer is used as a media center for additional multimedia tasks, such as HDTV programs, high-seated central processor, hard disk and schedules on the desktop are needed. For memory and volumetric graphics, 3.0 or higher is sufficient.

Why Windows does not update the equipment rating

The circumstances listed below may interfere update Windows Performance Index.

• Battery powered. Windows automatically tries to save energy when power is used only from the battery. So, if the computer runs from the battery, performance estimates will not affect its true possibilities. Connect Computer K. electrical network And launch estimation.
• Lack free disk space. The Windows Performance Index Evaluation Tool creates a test file on the hard disk. If there is not enough disk space to create a test file, the assessment will not be completed. To free up disk space, you can use a disk cleaning agent.
• Evaluation is already executed. If the product rate estimation means Windows already Performed, the estimates will not be able to update.
• Driver Display Outdated. If the computer uses old version Display driver may not be updated.
• There is no multimedia support. If the computer does not have multimedia support, the evaluation will not be able to update.

Personal computers are complex computing devices. The effective performance of such a machine is achieved due to the use of modern components, but, as is well known, over time they are obsolete. The performance index will allow you to determine windows users 7, injecting in computer "hardware", what exactly should be upgraded.

What is the performance index?

Productivity index, as follows from the title itself, is a tool that automatically evaluates the performance of the computing machine, that is personal computerHis key elements. It should be understood that the system shows not the average value, but the smallest. For example, if the "Processor" parameter is equal to 4 points, and all other are 5, then as a result you will see exactly 4 in the "general assessment".

Performance determination is made in all key parameters of the system: "Processor", "Memory (RAM)", "Graphics", "Graphics for Games" and "Main Hard Disk".

Looking at the table, any owner of the computer will be able to find out yourself - what components are required to be upgraded.

How to find out performance assessment?

Find out the performance estimate is easy. You can do this in two ways: through the "computer" and "control panel".

View in the computer and operating system parameters

View the option "Counters and Productivity Means"

In both the first and in the second case, you will fall into a section where you can look at the performance of your system performance. In the window, all estimates separately, each of which belongs to a particular element of the system and the overall assessment.

In the event that you recently improved some element of your personal computer, it is advisable to re-evaluate in manual mode. To do this, click on the "Repeat Rate" button.

Click "Repeat Evaluation" to obtain current data on the system

You can do this only with administrator rights. If you use a guest account, you will need to specify a password from account Administrator, otherwise you will not be able to change the performance of the computer performance.

What the scores mean. Normal index indicators, what could be the maximum rating?

It is easy to guess that the scores that you will see in the table - an assessment of the performance of a component of the system. The Windows 7 operating system thus evaluates how the computer can cope with what tasks. If these estimates are high, there is nothing to worry about, since your PC can successfully work even with time-consuming tasks, and if you see the values \u200b\u200bclose to 1, then it is worth thinking about upgrading.

Table of evaluation of all components

Consider all the items: the processor component is responsible for the number of operations that can perform installed processor in one second time. Component "Memory (RAM)" indicates the speed of execution of type-write operations in one second time. "Graphics" - an assessment of the desktop performance for the AERO interface included, that is, for the desktop itself. The next component - "graphics for games" is already responsible for performance in different applicationsdemanding K. system resources, for three-dimensional graphics. "The main hard disk", oddly enough, is estimated at the rate of making data exchange, and not by the volume of the hard drive.

Optimal indicators of the processor and other components

Normal performance index indicators should be considered based on the priority tasks that you will execute using the computer. If the computer will be used mainly simple applications, like text editors, tables, posts of mail and web surfing, then you should pay your attention to the number of operational storage device and processor. The assessment of these indicators may be equal to 5, and you can not pay attention to the "graphics" component and at all - 2 will be enough.

Computer games and demanding application system resources naturally need the best components. If you are going to perform such tasks on your PC, then make sure that the "processor" components are "memory" and "game graphics" have the highest ratings. In this case, the hard disk plays not the most important role, so it will be quite enough to evaluate in 3 points.

If your desktop will be most of the time to be used as a media image (you will watch a movie or listen to music), then take care of the best "memory" and "processor". For all other components of the system, there will be quite a rating of 3 points.

Maximum index assessment

Maximum performance index assessment varies depending on the bit of the system. Modern personal computers have 64-bit operating systems, 32-bit are less common. The bit is determined depending on the amount of RAM. Thus, the 64-bit OS are suitable for devices possessing 4 gigabytes of RAM and more, and 32-bit, on the contrary. This is due to the fact that 32-bit operating systems are not capable of reading a greater number of RAM than 4 gigabytes. 32-bit devices are rated on a scale of 1.0 to 7.9 points. 64-bit architectures have a maximum estimate of 5.9 points.

Improving the assessment: How to increase PC performance in several ways?

Before running to a specialized store where components for personal computers are sold, you can optimize your operating system and PC. This procedure will make it possible to slightly increase the rating.

Change the desktop display - increase the rating

First, change the display of the operating system interface. For example, if you have AERO installed, then change it to traditional. Appearance The windows and the menu affect the performance of the computer, so such a procedure can significantly help you solve urgent problem.

Changing the desktop interface

How to improve index using diagnostics

Secondly, make the diagnostics of logical disks, optimize them, remove them unnecessary files and programs. Remember that a littered hard disk significantly worsens the computer work as a whole, so you can ensure that only what you really needs to be installed on the PC. After deleting all programs and files, make defragmentation, which will allow you to compose all the remaining files and folders, and improve work.

Defragmentation of a logical disk

Thirdly, you diagnose the drivers used. It is not uncommon that certain drivers may worsen the operation of the computer, reduce its performance. If you have a corresponding notification, it is better to take care of their update and replacement.

Last, which will increase the productivity index, of course, replacing old components to new ones. You can set an additional memory module if on motherboard There is an appropriate connector or instead of the old install more powerful. On the desktop PCs of modernization, each element is subject to, it all depends on your material capabilities, and everything is more complicated with laptops. In such devices, only the volume of the hard disk or RAM can be improved, and all other elements, unfortunately, cannot be upgraded.

Video: Definition of productivity index in Windows 7

Why can the abyss of performance assessment and what to do in this case

As a rule, the computer performance assessment works offline, without any significant problems. Nevertheless, sometimes there are errors in determining the estimate, the reason for which can be: a variety of software, allegedly responsible for security when working on a network or codec. Codecs - software designed for decoding and coding media files. The fact is that the score of the system performance is based on the VC-1 codec, and conflicts may occur during its change or modernization.

Disconnect antivirus

First, try to disable antivirus software (depending on the software used, the sequence can be different).

Delete and install codecs

So, if the antivirus disabling you did not help, you will have to delete and install all codecs manually:

Update BIOS.

If these ways did not help you, then you may have to resort to updating the integrated BIOS environment, drivers, in particular, DirectX or roll back previous versions. Log in with administrator rights and follow the path C: \\ Windows \\ Performance \\ WinSat \\ DataStore.

Clean the Datastore folder

Here you should delete absolutely all files and restart the personal computer. After launching OS re-launch performance estimation.

Scan system files

Sometimes it is not enough, it means that you should check the presence of system files. You can do it like this:

The procedure for finding problems in system files and their subsequent elimination will begin.

Reinstalling Visual Studio 2010

If you have an error that indicates the absence of MSVCR100.dll when evaluating performance, then you will have to reinstall Visual Studio 2010. This is a free library accessible to all users to download on the official website of Microsoft Corporation. You need to choose a package based on the bit of your system, and you can find it like this:

Computer performance index is a useful tool that allows the user in a timely manner to figure out the need to upgrade one or another device details.

www.2dsl.ru.

What is the performance index in Windows 7

One of the indicators that allows you to estimate the power of the computer and its willingness to cope with certain tasks is the performance index. Let's learn how it is calculated on the PC with Windows 7, where you can see this indicator and other associated with it, nuances.

See also: Futuremark Video Card Performance Index

Productivity index

The performance index is a service that is designed to help assess the user's hardware characteristics of a particular PC to know which software for it is suitable, and what it can not pull.

At the same time, many users and software developers are skeptical about the informativeness of this test. Therefore, he did not become a universal indicator for analyzing the system's capabilities regarding a certain software, as Microsoft's developers were calculated, introducing it. Failure prompted the company to refuse to use the graphical interface of this test in later versions of Windows. Read more Consider various nuances of applying this indicator in Windows 7.

Algorithm of calculation

First of all, find out what exactly the criteria is calculated by the performance index. This indicator is calculated by testing the various components of the computer. After that, it is assigned to them points from 1 to 7.9. At the same time, the overall assessment of the system is exhibited by the smallest score, which received a separate component. That is, as you can say, according to its most weak link.

• It is believed that the computer with a total productivity of 1 - 2 points can support common computing processes, surfing the Internet, work with documents.
• Starting from 3 points, the PC can already be guaranteed to support the theme of Aero, at least when working with one monitor and perform some more complex tasks than the PC of the first group.
• Starting with 4 - 5 points computers correctly support almost all windows features 7, including the ability to work on multiple monitors in Aero mode, playback of high definition video, support for most games, comprehensive graphic tasks etc.
• On a PC, which estimate more than 6 points can be easily played in almost any modern resource computer game. from three-dimensional graphics. That is, a good gaming PC, the performance index should be no less than 6 points.

Five indicators are estimated:

• Ordinary graphics (productivity of two-dimensional graphics);
• Game graphics (productivity of three-dimensional graphics);
• Power processor (number of operations performed per unit of time);
• RAM (number of operations per unit of time);
• Winchester (data exchange rate with HDD or SSD).

In the screenshot at the top, the basic computer performance index is 3.3 points. This is due to the fact that the weakest component of the system - graphics for games, was assigned precisely than a score of 3.3. Another indicator that quite often demonstrates a low estimate is the rate of data exchange with a hard disk.

Performing productivity monitoring

Monitoring system productivity can be performed different ways. This can be done with third-party programs, but there are more popular options for performing this procedure using the built-in system tools. More detailed with all this you read in a separate article.

Read more: Evaluation of the performance index in Windows 7

Improving the productivity index

Now let's figure out what ways to increase the computer performance index.

Real increase in productivity

First of all, you can produce an upgrade of the hardware component with the lowest estimate. For example, if you have the lowest score on the desktop or games, you can replace the video card to more powerful. This is definitely a general performance index. If the lowest assessment refers to the "Main Hard Disk" item, you can replace HDD to faster, etc. In addition, an increase in the productivity of the disk sometimes allows its defragmentation.

Before replacing a certain component, it is important to understand, or whether it is necessary for you. If you do not play games on your computer, it is not very reasonable to buy a powerful video card only in order to increase the overall computer performance index. Increase the power of only those components that are important for the tasks you run, and do not look at the fact that the overall performance index remains unchanged, as it is calculated in terms of the smallest assessment.

Another one effective way Increase productivity assessment is to update outdated drivers.

Visual increase in productivity index

In addition, there is one tricky method, of course, objectively not increasing the productivity of your computer, but allowing you to change the value of the displayed estimate to any you consider the desired. That is, it will be an operation for a purely visual change in the parameter being studied.

Although the practical benefit from calculating the performance index by many specialists is questionable, but, nevertheless, if the user will pay attention to the indicators specifically necessary for its work, and not chase for the assessment in general, the result obtained can be effectively used.

The evaluation procedure itself can be made both using the built-in OS tools and using third-party programs. But the latter seems unnecessary in Windows 7 with its own convenient tool for these purposes. Those who want to get additional information Can take advantage through the "Command Line" or open a special report file.

We are glad that you could help you solve the problem.

Survey: Do you help this article?

Well no

lumpics.ru.

How to increase Windows 7 performance index.

In Windows 7, there is such a none of the desired index that shows the performance of the system. Thanks to this index, you can determine the Windows 7 for installation on a computer or not. But, if you are honest, then this index is needed only to boast of your friends with a powerful system. Now we will tell you how to turn the performance index.

If you want to make it so that you have a productive hard drive (as if), it is absolutely no need to buy a powerful hard drive with 15,000 revolutions. There are two very simple waythat will increase the performance index without costs.

This is the easiest way. You just need to download a cheat program called Windows 7 Rating Changer. This can be done here. There should be no problems with installing this program. The only thing to do after windows download 7 Rating Changer, it turn off the UAC and restart the entire system.

The program is very easy to use.

You just need to specify the parameters you want. And this will be enough.

You can turn the index to 7.9. After you want to click on the "Save" button.

Then you need to re-check the index. And enjoy the contemplation of cool numbers.

This method is a bit more complicated, but the result is also good.

First you need to go to this address - C: \\ Windows \\ Performance \\ Winsat \\ DataStore.

After that, you need to select the Formal.assessment (Initial) .winsat file. (necessarily the newest, it can be determined by date). When you open the file, you need to find a block allocated in the figure below.

Change the numbers to those wishes (maximum - 7.9).

You can even change all the parameters to the maximum, but it will look not very real.

In the photo below, the result of the work done is visible. Here we did not change all the parameters, but simply changed the overall productivity index.

After all these manipulations, you will need only save the file. And you can enjoy a cool performance index of your personal computer.

The administration of the site Cadelta.Ru is grateful for the article by the author Solix.

If you have any questions, ask them on our forum.

cadelta.ru.

How to improve Windows 7, 8 and 10 performance index

The productivity index is such a computer characteristic that allows you to objectively assess the power of your computer, not adhering into technical details. Based on its results, you immediately understand which problem places from your device and that it would not hurt to correct.

By visiting the corresponding menu item in the control panel, you can get an assessment of the capabilities of your computer. Initially, it is selected for each parameter separately: for the processor, for memory, for graphics, and so on. On their basis, a general assessment is generated, which takes into account all items. The closer to the 8th point your result, the more powerful computer. Rating about 5 is the average value, it means that the computer will slow down a bit. And if below 5, then everything is completely bad.

But it is not necessary to upset immediately if the results of your device are not the best. Everything can be fixed, and now we will learn how to do it.

This is the most expensive option, but also effective, but there are several nuances:

• When replacing the processor, you need to take 30% more performance than your device. Only then will be a noticeable improvement.
• If, with a specific load, your OP is loaded by 80%, then it should be changed to more powerful.
• More popular with every day they become SSD. Such an expensive investment will significantly increase the performance of your device. In addition, SSD has a lot of other advantages.

The video card is increasingly clear: replacement for more powerful increase productivity.

This methods helps, even though he is not the easiest. In addition, it will help prevent many breakdowns and problems that may arise. So such prophylaxis will perfectly affect the computer.

If you have never heard about it and all the more did not do, then this operation should be made first of the same queue.

Defragmentation helps to collect all the data into a single whole, which will be perfectly affected by performance, and in memory. With it, you can free up to 1 GB.

Optimization using programs

These utilities will solve a number of problems, including performance.

An excellent option will be using CCleaner, which will help remove various trash. The program interface is very simple, which allows you to quickly make an analysis of the system and delete everything too much.

In addition, there is still a good program - PcMedic, however, it is not free. It is aimed at an increase in productivity. It consists of one window in which you choose the data of the elements of your device.

There is another good program called Auslogics Boostspeed. So it combines all the functions of the above utilities. But it is worth checking everything she wants to do since it is possible to "accidentally" delete all important documents.

Almost all programs are started when the computer is turned on. Because of this, the very productivity that is so trying to improve so much. Therefore, it is worth visiting the task manager and turn off the autorun of unnecessary utilities.

From time to time, updates must be checked for their drivers. It is best to do this on the official website for your device.

Installing newer versions of drivers should be done manually. It will positively affect the performance of your device.

If you notice a sharp and significantly reduced performance, then the matter is most likely in viruses. Scan your antivirus system, it is desirable, not the one that is installed on your computer. Just for prevention, you can use Dr. Web.

Thus, it is possible to significantly increase the performance index of your computer to such a level that all complex and demanding applications will simply "fly". It should only be right and thoroughly approach the case, for example, to apply many methods at the same time.

it-Increment.ru.

How to make a performance index assessment on Windows 7

Greeting you dear friends! In this short note, I will show how to make an assessment of your computer performance on Windows 7.

The system performance index is the middle ball, which is calculated based on the measurement of the following parameters:

• Processor - Calculation Operations per second
• Memory (RAM) - Memory Access Operations per second
• Graphics - desktop performance in Windows Aero
• Graphics for Games - Performance of three-dimensional graphics and games
• Main Hard Disc - Disc Cancer Speed

The index is measured on a scale of 1.0 to 7.9 points.

I will show an example of how to evaluate the system on the example of your HP Pavilion G6 laptop.

Laptop features:

• Processor: Core i5 3210m 2.50 GHz
• Memory: 6 GB DDR3
• Maximum memory size: 8 GB
• Built-in graphic map: Intel HD Graphics 4000

In order to evaluate, follow the following instructions:

Go to my computer by clicking on it 2 times with the left mouse button:

While in the window, right-click and select Properties:

The characteristics of your computer will appear before you, as well as the current index (if the evaluation has already been done) - we click on the inscription - Windows performance index:

Sheets at the bottom of the window and see that the left is the date of the last analysis, and the on the right there is an inscription - to repeat the estimate, and click on it:

After that, the evaluation process will begin (most likely the brightness of the screen will be added), which may take a few minutes:

After completion, you will see an average estimate (medium index), which will be depicted on a blue background:

Above, in the pictures, you can see the estimates of my laptop.

What can I say about the assessment?

Let's look at a small list:

• If the estimate is less than 3.5, it means that the computer is quite weak, and is suitable only for solving office tasks.
• Evaluation from 3.5 to 5 indicates the average characteristics of the PC.
• Evaluation from 5 to 7 speaks of a rather high PC potential.
• Evaluation from 7 to 7.9 speaks high power Your computer

On this I have everything, I wish you good luck, while!

In Windows 7, there is a very interesting feature that estimates the capabilities of your computer, based on the hardware and software configuration. It is a pity that it can be used after purchasing a computer, and not before. And seriously, this feature is called the "Windows 7 performance index". Let's deal with what it is.

What and how is it?

First of all, the main components of the computer are tested for performance - the central processor, the hard drive, the RAM (RAM) and the graphics. To obtain an estimate, click "Start", "Control Panel". In the large list we are looking for "counters and productivity means". Press.

If you have not yet used this feature, you will see the "Rate Computer" button in the lower right corner. If the operation has already been carried out, then the previous WINDOVS 7 performance index will be reflected in the zkrane. To update, click "Repeat the rating".

During the performance estimate of the computer performance, you should not run any programs. Upon completion, a window will appear with the results.

What do these numbers give?

Estimates are exhibited on a scale of 1.0 to 7.9. Approaching the base index to the top mark indicates the power of the computer. Do not think that the base index is averaged value of the data. This is the smallest of them. In our case, the processor was estimated to be 5.1, the memory is 5.5, the graphics 4.3, the hard drive 5.4. From this, the base index 4.3 was obtained.

Obviously, to increase computer performance, it is necessary to either update morally outdated components, or competently configure those components that have received a low estimate. In our case, it is graphics.

What can be changed?

The question arises: "How to increase Windows 7 performance index"? First you need to independently optimize the operation of your computer. To this, we will take at least the following list of actions:

• disconnect visual effects
• disable unused services
• spend check hard disk for errors and broken clusters
• make disk defragmentation
• clean your computer from unused files.

Update the Windows 7 performance index - in 99% of cases, the above-mentioned actions will be praised on its indicator. If nothing changes, update the versions of the drivers of your equipment. You can use ready-made programs to optimize the system, such as Tuneup Utilities or Windows 7 Optimizer. All in your hands!

IN Windows Vista. For the first time, such an interesting utility appeared as Productivity index. With it, you can see the Evaluation of the Windows system on various criteria. Subsequently, this feature moved to Windows 7 and Windows 8, but then the developers decided that it is not needed and therefore in Windows 8.1 you will not be able to find it so simple. However, many users liked such a function, in part in order to face pussies to find out who is cooler. In this article, you will learn a little more about the Windows performance index, as well as Consider how you can still know it in new version Windows 8.1.

Performance Index (Windows Experience Index, WEI) - This is the assessment of the Windows system itself the main characteristics of the computer on which the OS is installed.

Main characteristics, it is:
CPU
RAM
Graphics
Graphics for games
Disk subsystem

As you can see, the most important characteristics needed for performance.

Each of this characteristic is given its index (number) which is calculated by the special formula. Minimum value 1 and the maximum depends on the version of the OS: in Windows Vista it 5.9 in windows 7 7.9 , and in windows 8 9.9

Of all these estimates, the minimum value is selected and indicated as the main estimate. Why did you do not know, perhaps that users tried to increase it, paying attention to the minimum value.

How to find out the rating (index) of performance in Windows 7 and 8

Click PKM P. My computer and choose Properties.
In this window, pay attention to Evaluation In category System:

click on the link Windows performance indexTo learn more detail.

We get this such picture in which everything is already painted:

It happens that the score has not yet been done then it will be necessary to do it. You can also double-check if something has changed in the system.

How to find out the rating (index) of performance in Windows 8.1

As I wrote above, in this version of the system you will not be able to find performance, but it is still there.

We go along the way (letter_disk_s_vinda): \\ Windows \\ Performance \\ Winsat \\ DataStore And in this folder we are looking for a file that contains the letters Formal.assessment.

Explanation:
(letter_disk_s_vinda) - It is usual C. . You can go on to folders along the path, or you can simply copy and paste into the address string of the conductor.

The file that we need starts with numbers. They mean the date and time of creation, as well as other "nonsense." About the name of him 2014-03-21 12.02.02.533 Formal.assessment (Recent) .winsat.xml
It opens through (usually Internet Explorer).
If there are several such files, it is better to open the latest by the date of creation.

An open file is the following form:

We need to pay attention to the characteristics that are between WinSPR tags.

I will decipher a little that as it is designated.

SystemScore. - overall productivity
MemoryScore. - Estimation RAM
CPUSCORE. - Processor performance
GraphicsScore. - graph performance performance
Diskscore. - Disc score

There are a few more, but they are not needed. Can you translate yourself if you want.

If you think this option is unnecessarily time consuming, you can use and introduce into it
Get-CiminStance -ClassName Win32_Winsat
As a result, performance estimate will appear in Windows 8.1:

It happens that you will not be able to find this file or will not withclude an index. This may mean that he has not yet been held. If in Windows 7 and 8 it was simply dealt with, then in Windows 8.1 you will need to keep some teams in command line from the administrator. Namely:

winsat Formal - factory overall system performance;
winsat Formal -V. - assessment of overall system performance, detailed conclusion;
winsat Formal -XML file.xml - output the result of the check in the specified XML file;
winsat Formal -restart Never - when re-inspection, to evaluate only new components;
winSat Formal -restArt Clean - When repeated check, to reset the history of inspections and complete checks.

It is better to use the first.

In course, the window will be like this:

There are also the same programs that will help check the performance index.

Chrispc Win Experience Index

WSAT.

I even liked the second, because it does not require installation, Russian-language, and also shows another additional necessary information on system and hardware.

How to enlarge or improve the index (rating) of Windows performance.

The answer to this question will give you both the system itself and ordinary logic.

As a rule, everything consists in replacing the "spare parts" of the computer. If the small processor index is changed to a more powerful, if there are few RAM - increase.
It happens less often when everything seems to be fine, but the index is small. Then you need to produce.
If a small evaluation of the disk - we delete too much, we produce, etc.

That's it. On the one hand, the performance assessment is the desired thing, it helps to understand what you need to pay attention, based on the low index, and on the other it is not needed if you and so you know that your computer is weak or the disk space is little \u003d)