How to change permission if it does not change. Setting the optimal resolution. How to change screen resolutions

Question from the user

Hello.

I had a mistake with the image ... One game was launched, for some reason the error has flown sharply: "... that the work of AMD video device was stopped in mind ...", and then I noticed that everything was big on the monitor screen .

Also, if earlier I could put hundred labels on the desktop, now it is already 10 - and there is not almost half of the place! How do you need to do to return everything to your previous condition?

Anatoly.

Good time!

There is a similar due to the fact that not optimal screen resolution (In your case, perhaps "flew" the video driver, and because of this, permission was hampered).

In general, if you explain simple wordsT. screen resolution - This is the number of points for which the picture is built on the monitor. Of course, the more points - the clearer and more accurate the contours of the image.

Each monitor has its optimal resolution that, in most cases, it is worth choosing (if you put permission more recommended - then the text, and some items will become too small and read them will be difficult if less recommended - everything will be big on the screen, as The author has a question).

And so, we turn to the point ...

Screen Diagonal Relation

In general, as already said above, each monitor has its optimal resolution, which (usually) and installs Windows by default (at least if you have installed all required drivers). In some cases, this does not happen ...

Resolution is associated with diagonal monitor . The more diagonal, as a rule, above the resolution. If anyone knows, the diagonal is measured in inches (1 inch \u003d 2.53 cm).

What is diagonal and how measured (1 inch \u003d 2.53 cm)

Just below, I brought a plate in which the monitor diagonal and permission on it are linked (I ask you to notice that the numbers are conditional (at least most often it is)because Each manufacturer itself sets its parameters).

Diagonal	Resolution	Designation	Format (aspect ratio)
15.0	1024x768.	XGA	4:3
15.6 (laptop)	1366x768.	HD.	16:9
17.0	1280x1024	SXGA.	5:4
17.0	1440x900.	WXGA +.	16:10
17.3 (notebook)	1600: 900 or	Full HD.	16:9
19.0	1280x1024	SXGA.	5:4
19.0	1440x900.	WXGA +.	16:10
20.1	1400x1050.	SXGA +.	4:3
20.1	1680x1050.	WSXGA +.	16:10
20.1	1600x1200.	UXGA	4:3
20.8	2048x1536.	QXGA.	4:3
21.0	1680x1050.	WSXGA +.	16:10
21.3	1600x1200.	UXGA	4:3
22.0	1680x1050.	WSXGA +.	16:10
22.2	3840x2400.	WQUXGA.	16:10
23.0	1920x1200.	WUXGA.	16:10
24.0	1920x1200.	WUXGA.	16:10
26.0	1920x1200.	WUXGA.	16:10
27.0	1920x1200.	WUXGA.	16:10
30.0	2560x1600.	WQXGA +.	16:10

Also, monitors can be with different aspect ratio (in the form of a "square", elongated rectangular, etc.). The sign below just lines the resolution with the aspect ratio.

Setting optimal permission

By the way, to find out the current monitor resolution - you can use online services:

Important!

If you do not have the video driver icons in the tray, on the desktop and in the Windows control panel - most likely you have no video drivers.

Also, if there is no, you do not manage to change the resolution (simply in the list will not be the optimal option). Until you install new drivers (or do not update the "old") - do not fix the problem.

My blog has a detailed article on updating the video adapter drivers, I recommend to familiarize:

In the IntelHD video driver (NVIDIA, AMD)

This is one of the easiest ways to quickly change many screen settings: resolution, brightness, contrast, color gamut, sweep frequency, etc.

If you have a video device, you can use the Trey icon, next to the clock (or click right-click Mouses anywhere in the desktop). In my case, this is IntelHD, you can also be an AMD ( ATI Radeon.), or NVIDIA (GeForce).

In the settings, as a rule, you need to open the section of the main parameters (in IntelHD is "basic settings". In general, many parameters and variations of the menu depend on the version of your video driver: All possible options Provide in the article - unreal ☺).

You need alternately changing permission - choose the most convenient and comfortable for work. Focus first on the recommended. If the items on the screen are too small - try moving to 1-2 points permission down, make it a little less.

In Windows 7.

If you have Windows 7 - it is enough to click on the right mouse button in any free desktop location, and in the menu that appears, select "Screen Resolution", see the screenshot below.

Next, in the "Resolution" tab, you can see that you have chosen in current Timeand what else can be installed. The optimal resolution is usually marked as "recommended" (see Screen below). Most often choose either optimal optionor 1-2 points below (so that the picture and text on the screen is larger, relevant for monitors with a large diagonal).

Screen Setup in Windows 7

In Windows 8/10

Press the button combination Win + R., then enter the command desk.cpl And press ENTER. See Screenshot below.

Next, the "Screen" section opens and you can change the set of parameters: brightness, text size (font), resolution, etc. Open additional parameters, see which permissions can be installed (see Example below).

By the way, if you do not have such a list, and the optimal resolution is not specified at all - most likely (as already said above) - you simply do not have a video device. Try to update it (the link to the article led above).

Important!

If you have old CRT monitor (these are so thick ☺, now there are few such, but somewhere used) - check required spell frequency (Measured in Hz).

This parameter should not be less than 85 Hz (at 60 Hz - strongly noticeably flickering of the monitor, which causes discomfort and). Even better if installing 100 Hz.

Sometimes automatic setting Systems gives incorrect parameters of opening windows. It happens not only in browsers or pictures, but also in games or even the operating system . How to change the screen resolution so that this does not affect the application of applications? Let's figure it out.

What is it for?

See also: [Instructions] Screen Calibration on a laptop or monitor for PC running Windows 10

Working windows table

After installing the game or the pirated version of the OS, the image size may not be coincided with the size of the monitor. When we change the screen resolution, then as if we caught the picture under the required value.

Make it necessary. First of all, for the convenience of use. Also, the screen resolution affects the speed of data loading. By changing the resolution, the user changes the quality of the desktop icons and images. When the quality decreases, the device can work faster, but may be visible pixels.

Also, with incorrectly specified parameters, the screen may be less or more monitor . Some monitors are more elongated in width than others, so you can not call the appropriate expansion of the entire devices.

On computers, the resolution is most often 1920x1080 or 1280x1024, or 1024x768. On laptops it is 1366x768 or 1280x720. The optimal width and height of the image are prescribed by instructions or on the official website.

How to change screen resolution in the game

See also: 6 simple ways how to make the game full screen in Windows

When the game resolution does not coincide with the monitor, it may not even start. If it still happened to load the menu, it's almost done. After launching, in no case cannot be started using the program if it is not suitable in the size of the monitor. Figure 3 Monitors with different diagonal sizes

To change the resolution inside the game, we offer the user the following instructions:

Go to the settings menu.
If you are not familiar with the menu, you have to search for the screen resolution.
Select the required resolution and save.

Most often, the program shows how the game will look like with this resolution.

If the parameters are specified incorrectly, problems may arise.

If the user does not know the screen resolution, it is necessary to find it in the instructions or on the Internet. After the settings are better to restart the game. Usually the screen size changes immediately or the program restarts automatically, if this happens, then manually takes just a couple of minutes.

If the game slows down, you can reduce permission. It is necessary to do this for a certain number of times. That is, at 3200x1800, it is possible to reduce up to 2560x1440, while the ratio will remain the same 16: 9.

How to change the screen resolution without going into the game

See also: How to Enlarge FPS in Games: Proven Methods | 2019.

There are no 100% of identical instructions to all installers, but the change method is approximately one.

First you need to find the folder in which the settings files are located. Most often, these files are called "Config" or "UserProfile". The name must be associated with the installation of the game.

These files are in the folder with the game itself, or in its installer. XML settings file format, so if you try to open it pops up the browser window.

To avoid this, the file must be opened in a text editor. By right-clicking, go to "Open with", from the proposed list to select "Notepad".

The desktop will open the file with incomprehensible teams at first glance. Do not worry. "Resolution" in English "Resolution". In order not to spend time, in "Search by text" copy this word. Instantly go to that part of the program where it is written and highlighted in blue.

Perhaps the results will be several. Most likely it will be "Resolution" and something else or just a word.

At a successful completion of the search, go to the very resolution change.

Near the "Resolution" width and length of the intended screen are written. Change the data of your monitor or less. If the screen is 1366x768, enter it or multiple it. After saving the file, the game will start with the user-selected permit and leave these default settings.

Some games have a special settings launcher. The name of the game and Launcher. Opening it, the user goes into settings without going into the game itself. After saving, also go into the game and remain until the next change.

Video: Change the permission in the game for the right

Instructions for Windows

1 On an empty desktop location, right-click.

2 Go to the "Properties" feature.

3 A window will open in which you want to select "Parameters".

4 In this part of the settings there is a "screen resolution".

5 Runner (Left Palm) will help choose more or less screen resolution. The data will be reflected below the slider. You can also independently set the necessary scale.

6 At the end of the settings, click "OK" so that the changes are preserved.

Before saving, the screen version will be shown, that is, how it will look like on the monitor after saving. If the option does not arrange, it is enough to cancel the saving.

It may not immediately get to choose the optimal resolution, but after a few attempts still can. To speed up the search, it is better to find possible screen sizes on the Internet.

What is the screen resolution? This parameter depends on the clarity of the picture on the monitor. The higher the permission, the smaller the pixels are colored elements (points), from which, from the mosaic, and consists of a digital image.

With low resolution of the screen, the pixels are enlarged, and their total number becomes smaller, so the picture looks like a grainy and blurred. If you look closely - it all consists of small quadraticles, which is especially noticeable on thin lines and contrasting color transitions. Icons and windows with low resolution are displayed disproportionately large, their edges often go beyond the boundaries of the screen.

In the minimum resolution (800 × 600) Windows 7 desktop looks like this:

With high resolution, the number of pixels increases and, accordingly, their size decreases, so the image looks like naturalistic and clear, the graininess is absent. IN maximum resolution (1366 × 768) Windows 7 desktop looks like this:

The maximum allowable resolution depends on the technical properties of the display matrix and the capabilities of the video card. If you have to personally install Windows 7, you had to notify that immediately after installation, the screen resolution is minimal - 800 × 600, and it cannot be changed to more, even if you have a superior, powerful video card. This is because the system uses a basic video whose task is to ensure at least some kind of visibility of what is happening on the computer. To "squeeze" from the iron to the maximum, you must install the appropriate drivers.

How to change screen permissions?

After installing the video driver, the screen resolution is automatically installed on the optimal and the user becomes available to the configuration. You can set one of several standard permissions using the Windows 7 Configuration Setup tool.

Go to the control panel and from subparagraphs of the category "Design and Personalization" Select "Screen Resolution Setting".

Another way to call this setting is the screen "screen resolution" in the context menu of the desktop.

Click one of these items opens the "Screen Settings" window. Setting the resolution is available from the list item of the same name, next to which the drop-down menu is. Inside the menu - the slider scale, moving which can be changed screen resolution from a minimum to a maximum. This setting on the different computers It differs, and this, as already mentioned, depends on the properties of the display matrix and the capabilities of the video card.

By setting the desired value, click the "Apply" button. After that, the resolution will change, and the window displays the window to save the change. If everything suits you, click the confirmation button, if not - do not press anything: After a few seconds, the display parameters will return to the previous one.

That's all the setup - the screen resolution changes immediately, you do not need to restart the computer for this.

Setting up non-standard screen resolution in Windows 7

Modern laptop monitors and displays feature the picture when they work with a resolution recommended by the manufacturer. But in the list of available windows permissions 7 may not be necessary, that is, the system tools will not help you. To install non-standard resolution, you will need third-party software. It can be branded utilities From monitor manufacturers or programs to configure video. As an example, consider one of these programs - PowerStrip - a utility for overclocking and fine-tuning video cards. In it, among other things, it is possible to change the screen resolution widely.

Download the PowerStrip on the link and install on your computer.
To configure the display resolution in the main PowerStrip window, in the "Connected Monitor" section, click the Edit button.

To create an INF file where the profile of the settings of the selected monitor will be stored, click "Create".

In the Monitor Information window, in the "Output Settings" section, set the desired display resolution vertically and horizontally, after which to save the profile, press the button with the floppy icon.

To apply installations, you need to restart the computer, click on the PowerStrip icon in the system tray, select from the "Display Profiles" menu and specify the saved profile.

By clicking the "Settings" button here, you can get into the Changes section of the screen parameters. In this window, you can set another resolution and create some more profiles.

Troubleshooting after changing screen resolution

Sometimes due to the installation of unsupported display resolution after windows downloads 7 Displays only a black screen with a cursor and nothing else. In this case, the settings must be brought to standard. This is done like this:

Restart the PC by clicking before re-start Windows key F8.
From the Additional Run Options menu, select "Safe Mode".

After starting the system, go to the screen resolution settings and install one of the standard values, preferably low (then you will change it).

After that, reboot into normal mode, change the permission to optimal and the problem will be solved.

In this article we will tell our reader how to change screen resolution in Windows 10. Operational windows system 10 is new, so PC users meet problems with the recommended resolution, which is automatically placed. Basically, the problem with the resolution of the screen is observed on old monitors and rarely on new ones. Problems are usually manifested by a strongly stretched image on the display, on which it is very uncomfortable to work at the computer. This is due to drive support, both monitor and graphic adapter. In order to solve the task with a stretched image and incorrect resolution, we have prepared examples where we describe their detailed solution.

Expose Monitor Resolution with built-in Windows 10 tools

You can configure the correct screen resolution by means of Windows 10 itself. In this example, we will take sAMSUNG S19D300N monitor, in which the resolution of the TN matrix is \u200b\u200b1366 × 768 pixels. Windows tools 10 The task of a stretched image can be solved in two ways.

For first method We need to go to the new panel "".

You can do it in the menu " Start", I click on it to the item" ". In the opened panel "" you need to follow the link "". This action will transfer us to the item we need " Screen"In the window that opens.

Now in this window we need to go through the lower link "".

In the window that opens, we are interested in the block "". In the image, you can find out that in this block it is a resolution of 1280 × 720 pixels, and we need to put 1366 × 768 pixels. To change the permission to the correct, we click on the drop-down list and choose the right item "1366 x 768 (recommended)." Also in this list it is clear how permission from smaller to the recommended permit is changing.

After these actions, you need to confirm them. To do this, click the Apply button. At this stage, the setting is the first way ends.

For second way We need to go to the control panel, familiar to many users. To quickly transition to it, Windows 10 provides a special menu that opens with the Win + X key combination. IN " Control panels"We need to make a transition to such links" Registration and personalization» - « Screen"-" ". These actions will open the panel window that we need.

" In the image above, you can find out that the monitor resolution is 1280 × 720 pixels, and our Samsung S19D300N supports 1366 × 768 pixels. To solve our problem, you need to increase the SAMSUNG S19D300N monitor resolution to 1366 × 768 pixels. Therefore, we will make the click on the drop-down list and set the monitor resolution you need.

As in the first way, after the actions done, confirm their use button. From examples, you can find out that setting the correct screen resolution is completely simple, and with this task will cope any PC user.

Expose the right permission using the graphics adapter driver

In this chapter, we will consider ways to change the permission of the monitor using video card drivers. The driver change in the monitor settings is particularly relevant when Windows 10 does not see such ultra-high permissions formats as "Full HD (1920x1080) and Ultra HD 4K (3840x2160)". First we consider the video card driver Radeon. from AMD. For all current graphics adapters from AMD are now available new driver packages called Radeon Software CRIMSON Edition. To go to the monitor settings, you need to go to the context of the desktop context menu and select the item "" in it.

After this action, we will fall on the main panel of the settings, in which we are interested in the tab " Display».

In the extended settings, we turn to the item " Properties (VGA screen)", Which will open this window.

In this window, we are interested in the block " Monitor properties" In this block, we need to remove a tick with "Use Edid". After this action, we can set on their own size from low to ultra-high screen resolution.

Now consider setting up the monitor using the graphics adapter driver NVIDIA. To open the NVIDIA panel, as well as in the case of Radeon, we turn to the contextual menu of the desktop. In the context menu, choose the item "".

After that, the NVIDIA panel will open, where we are interested in the item " Change Resolution».

In the opened window of the point " Change Resolution»You can clearly find out what permission for this monitor model we can set. If you want to produce more thin setting Monitor permissions, then use the Customize key ....

In this chapter, we reviewed the setting for the main video cards produced now on the market. From examples, it can be seen that the monitor resolution configuration using the drivers is completely simple.

Solution of problems

Below we compiled a list of problems with the resolution of the monitor, which PC users meet in Windows 10:

The first most common problem is old video card drivers. Usually, Windows 10 automatically searches for video card updates. But if the computer is not connected to the Internet, automatic update Drivers video cards will not.
In this case, you will help drivers with drivers that are included with the photo card packaging. Pre-downloaded updates in the form of installers from the official sites of manufacturers of Intel, AMD and NVIDIA video cards can be helped.
Another problem may be wrong installed Drivers . Usually this situation is found when the user downloaded not the driver for his video card and installed it in the system.
In this case, it will help to remove this driver and installing a new specially created for your video card.
Like video cards, some monitors also require the installation of their drivers In Windows 10. Usually these drivers are included with the acquired monitor, you can download them on the official website of the monitor.
Often users to save, use cheap Chinese HDMI adapters and cable. This option for connecting the monitor to the computer often causes problems in which the image is stretched, the picture becomes fuzzy and its quality is constantly changing.
This problem is solved by replacing adapters and cables for better.

In this chapter, we described the most common problems that lead to improper resolution in the monitor and a stretched image. If you adhere to all the recommendations presented in this chapter, then you will probably decide the task.

Finally

In this material, we answered the question how to change the screen resolution in Windows 10 different ways. We also described a list of problems that affect the resolution of the monitor. We hope that our material will be useful for you, and you can solve the problem with a stretched image and improper resolution.

Video on the topic

Today we learn how to change the screen resolution in Windows 10 in several ways and consider the associated problems. These include: the inability to change the resolution, small or too large font after its change, blur fonts, etc. Finally, it is proposed to watch the video where it is shown to change the resolution by means operating system.

The resolution is called the number of points (pixels), which determine the size of the picture on the screen of any display. The first digit indicates the width of the image, and the second is on its height.

In order, the image did not look too large, or vice versa, small, as this parameter should be set permission equal to the physical (the number forming the image of the display matrix elements). This information is specified in the monitor manual, on the box to the display and is often highlighted on the screen when incorrect settings The latter.

We use the Windows 10 settings dialogue

The method to which the developers of the operating system are offered to use and change the display permission in Windows 10 is the easiest. This is the operation of the new system settings window.

1. Press Win → i to call the "Parameters" window.

2. Go to the "Devices" section.

3. On the "Screen" tab, go to "Advanced Parameters".

The three previous items can be replaced by calling the context menu of the desktop and select the "Screen Settings" item.

If you have multiple information output devices, you need to select the desired one.

4. In the list, select the parameter with the mark "recommended" (this is the native, physical resolution of your display) and click "Enter" or "Apply".

After that, you should evaluate the image quality and, in which case, the settings can be restored for 15 seconds by the only click. When choosing a native value of permission, it is not recommended, in just a couple of minutes, the eyes will be accustomed to new parameters and the picture will not seem unusual, poor-quality, too small, etc.

The same thing but through the control panel

In Windows 10, this parameter varies and familiar from "seven" manner. It is done in the control panel.

1. Call it through Win → x.

2. We put a way to visualize elements in the form of icons.

Or simply find the "Screen" icon through the search string in the right corner from above.

3. Click on this icon.

5. Select the display if there are several of them.

6. Indicate the value for each of them.

7. We click "Apply" to record new parameters in windows registry 10.

Change the resolution through the video card setup program

You can change the dispenser's separation ability using a program that is installed with the driver for the video adapter.

Consider how this is done on the example of AMD.

1. Call the "Radeon Setup" command through context menu Desktop.

2. Click "Settings", then "Advanced Settings".

3. We accept the terms of the license agreement.

4. Add a user permission by clicking "Create".

5. Indicate any values \u200b\u200bmanually and click "Check" to test a new resolution.

What is interesting is thus you can achieve any permission in both planes, even non-standard.

With NVIDIA video cards, the same is done through the NVIDIA control panel, which is called through the context menu of the desktop.

Possible issues with a resolution in Windows 10

The "dozen" automatically selects the physical resolution of the display and supports the high values \u200b\u200bof this parameter, including 4K and 8K. But in certain cases, this feature may not work and in the list of supported values \u200b\u200bmay not be "native" for the display. Then click "graphic adapter properties" at the bottom of the window of the additional screen parameters.

Then click "List of all modes". In the dialog that appears with a list of available settings, select the desired option and click "OK" before closing all windows, if the selected value satisfies.

Additionally, visit the site support site for the presence of it new version software To control the work of the graphic adapter (you can check the update via the video card control panel).

Perhaps for integration to the system of the new driver will need full removal old version BY. In this case, you should use the DDU utility, which supports both Intel video cards.

Visit the support resource (developer) of your display for availability fresh Driver for him. Windows 10 does not always cope with the task of updating the monitor drivers through the update center.

Problems often occur during the operation of cheap Chinese cables for connecting the video card and monitor or adapters. Try to get rid of them or change the connection interface, if possible.

Image quality background pattern can be low due to the low resolution of the most background clipIt should be replaced with a big and check result.