How to decrease mouse sensitivity. How to reduce the sensa on a regular mouse genius. How to change mouse settings. Changing mouse sensitivity using the driver snap-in

The sensory responsiveness of the mouse in almost every single situation significantly affects the convenience of our work at the computer, the responsiveness of movements in modern games: especially in shooters and RPGs, the speed of scrolling when reading text notes on a web page, when navigating in a browser. ... And if the mouse responds poorly, all the pleasure literally comes to naught, since you have to spend more time accessing a particular tab, but it becomes almost impossible to play. One of the probable reasons for the failure of the manipulator response is the abundant ingress of dust into the device, as a result of which the laser sensor does not penetrate the surface of the coating on which the mouse lies. Clean up indoor units mice can be used with a solution with a low alcohol content (up to 60%) and a cotton swab. However, this is a topic for a separate article. If you recently cleaned your mouse or it is completely new, it is quite possible that there is no response due to the fact that the sensitivity of the pointing device has not been adjusted in the system settings. Today I will talk about how to change mouse sensitivity in the Windows OS parameters so that all clicks work correctly, without lags and unnecessary manipulations. Below we will talk about Windows 10, since this is the latest on this moment system, and not everyone can immediately understand it with ease.

Why adjust mouse sensitivity?

Convenience is above all - this slogan is related not only to the technical aspect of our material world, but also to life in general. Why reinvent the wheel when you can make your task much easier by simple and simple actions, whatever it may be? The same goes for the sensitivity of the manipulator. It is expressed in the fact that this or that mouse button is correctly triggered, as well as a double click, as well as with what speed you will scroll through the text in text editor or browser using the wheel. You can change the sensitivity by adjusting a few sliders in the OS configuration accordingly. How can I change mouse sensitivity and where exactly can I do it?

Changing the scrolling tempo while reading from the screen

Scrolling text is especially important if you have loaded one of the sites in your web browser and it does not fit completely on the screen. It is very convenient to scroll the manipulator wheel up or down to move the text forward or backward several lines at once. You can customize how many lines of text to scroll at a time using one of the Windows options.

We go to the PC configuration menu using the start menu at the bottom left.

On the form that opens, select the "Devices" category, and in it go to the "Touchpad and Mouse" item.

If you carefully study the section that opens, you will notice several options for configuring the manipulator. We are interested in the "Scrolling with the mouse wheel" field and the number of lines by which the text will be scrolled with a single movement of the wheel. In the first paragraph, we set the value "Several lines at a time" so that the scrolling occurs smoothly and without undue noticeability. In the second field, set the available slider to the appropriate position, while checking the scrolling speed on the external open web page.

Now that the value we need is set, close the window and move on.

Adjusting the double-click speed of the primary mouse button

When opening folders and launching applications, we almost always double-click and achieve the desired result. This operation has become so commonplace that we no longer even imagine how we could do without it. If double-clicking doesn't work, the mouse may be clogged and just need to be cleaned of dust. But if everything is in order with this, the obvious reason is that the double-click rate of the main key of the manipulator is not configured. How to adjust mouse sensitivity by adjusting the speed double click?

We go to the configuration panel by selecting one of the items in the start context menu by right-clicking on the Start button.

We go to the section "Sound and Equipment".

In the section where the mass of connected to the PC is configured external devices(printers, faxes, sound cards), you can also customize the way you control an accessory such as a mouse. In the "Printers and Devices" section, open the "Mouse" subcategory.

Open the "Buttons" tab and set the "Double Click Speed" parameter. Nearby you can see a test folder icon on which you can check how well double-clicking works. After setting the slider in the desired position and checking its effect in action, we proceed to further customize the mouse sensitivity.

Changing the cursor movement speed on the screen

On the same form, open the "Pointer Parameters" tab. Here you can configure many parameters, including the speed at which the pointer moves, the display of the trail, the initial position of the cursor when the window is opened, and other settings. We set the parameter that is responsible for how to change the sensitivity of the mouse, namely the speed of the pointer movement.

You can check the mouse sensitivity setting by moving the indicator to the desired position and dragging the cursor to another place. Once the desired speed is reached, click "Apply" and OK.

If you have a custom style in everything, including your computer, you will surely enjoy the opportunity to change appearance pointer. On the Internet, you can find a lot of topics from which you can choose something bright and eye-catching, or not so catchy and, rather, unassuming. To do this, go to the "Pointers" tab, select the cursor display mode that we need, press the "Browse" button and specify the path to the graphic file on the hard disk in which the corresponding cursor image is saved.

That's the whole instruction. I hope now you can probably figure out how to change the mouse sensitivity in a Windows family system. Comfort when working at a computer is the most important thing. Without it, you will not be able to achieve high results and productivity comparable to those of successful entrepreneurs and business people. And our article will help you with this.

Your success in games directly depends on the choice of a gaming mouse. The question is not so much about choosing the right gaming mouse how much it is to choose the best gaming mouse you can work with. You can buy the best mouse with the best characteristics however, if you feel uncomfortable working with it, the results may be disappointing. If you have already purchased a gaming mouse and are satisfied with the specifications, you will also need to properly set it up and have it serviced regularly. Otherwise, you will not see the benefits. Be sure to read 5 important tips to help you choose your mouse, as well as improve its performance, and ultimately your gaming results.

Tip 1: Optical or laser mouse

To be a successful gamer choice correct mouse extremely important. This makes you wonder which mouse to choose - optical or laser? Generally speaking, you will see mice with two different kinds sensors used in gaming mice: optical and laser. A mouse with an optical sensor can also be divided into two subtypes - with a red or blue LED. While red LED mice are the most common, blue LED optical mice, like laser mice, can work on more complex surfaces such as glass.

In contrast, red LED mice, on some computer mats and special surfaces, can be smoother. On the other hand, a laser mouse has higher sensitivity and DPI. Although the sensitivity of an optical mouse is not as high as that of a laser, optical mouse demonstrates higher accuracy. However, the cost laser mouse usually higher than optical. Gamers should trust their feel more than just their performance when choosing a mouse.

Tip 2: DPI settings for different games

DPI (Dots per inch) is related to the speed at which the mouse moves. The higher the DPI value, the faster the cursor will move around the screen. Different games require different mouse movements and cursor movement speeds. The ability to control DPI is vital when moving from one game to the next. Choosing a mouse according to individual needs, as well as possibilities fine tuning speed and accuracy will help you to seriously succeed in games or completely disappoint in them.

Tip 3: Customize Macro Buttons

The gaming mouse has special macro buttons (one or more) located on the side of the mouse under the thumb. The buttons can be located both on the left and on the right side of the mouse. It depends on whether the mouse is symmetrical and can be used under any hand, or has a special shape for use only with the right hand. Choosing a mouse that fits comfortably in your hand will allow you to easily control the macro buttons, which is very important. You can program the corresponding buttons for certain functions in the game, thereby reducing the reaction time when making important decisions.

Tip 4: Dedicated gaming port is optimized for gaming mouse

The MSI gaming port has a polling rate of 500-1000 MHz and has a triple gold plating of contacts, which increases the resource by the number of connections to the port by more than 10 times. In addition, a special coating of the port prevents its oxidation.

To summarize, the gaming port is specially optimized for connecting high-speed gaming mice and allows you to fully utilize their capabilities. Better sensitivity, smoother gameplay, quick response are the key reasons why it is worth having motherboard equipped with a dedicated gaming port.

Tip 5: Use Teflon for Smoothness

Finally, we will talk about the mouse feet, which affect the smoothness and speed of movement. Teflon (polytetrafluoroethylene), due to its special characteristics, such as resistance to temperature and oxidation, poor adhesion, the ability to self-lubricate and be an excellent insulator, is currently actively used in the manufacture of computer mice. Due to its very low coefficient of adhesion to surfaces of other materials, Teflon is a very smooth material.

However, one of the serious disadvantages of Teflon is its low hardness and tendency to abrasion. If you are using a hard plastic mouse pad, it is very likely that you will quickly scratch the Teflon mouse feet and render them unusable. With damaged mouse legs and increased friction, movement of the mouse will become difficult. If this happens, you have to think about replacing the worn out legs. You can also use a high quality coated computer mouse pad. This will extend the life of the legs, but it will be much cheaper to replace them. Depending on your preference, you can choose the most suitable option.

Most users who do not have touch screens on their computer devices use either a touchpad or a mouse to control the system interface. When working with a mouse, the response of the manipulator to the user's actions is one of the most important indicators that ensure comfort in work. Many of the standard settings set by default are not to their liking, so sometimes the question arises of how to increase the mouse sensitivity (on Windows 8, for example, or on another system). This is done quite simply, but access to configuration in different OS versions is somewhat different.

How to increase mouse sensitivity: basic directions for action

In understanding the issue of adjusting the response of the manipulator, several important aspects should be taken into account. First, the modification of the mouse itself (standard and game manipulators with additional buttons) is of great importance.

Secondly, when it comes to how to increase the sensitivity of the mouse, you need to clearly understand which parameters will have to be changed. The following options are offered in the standard settings:

• scrolling;
• double click speed;
• the speed of moving the cursor across the screen.

There are a number of additional settings that you can set at your own discretion (cursor type, button reassignment, etc.), but by and large they have nothing to do with optimizing the response.

Accessing Settings in Different Windows Versions

The manipulator settings section in the simple version in all systems can be called through the "Control Panel".

But in the seventh version of the system, you need to use the section of equipment and sound (devices and printers), and in the eighth and tenth settings are taken out as a separate item.

In addition, if you are solving the problem of how to increase the mouse sensitivity on Windows 10, you can use the options menu to access the corresponding section, in which the device item is selected, and already there - the mouse and touchpad. To access the window of other parameters, use the advanced settings item (the same window will appear as in Windows 7).

How to increase mouse sensitivity on Windows 7 and 10: adjust the scrolling speed

In the standard settings window, the "Wheel" tab is used to enlarge the scrolling lines (pages).

Here you can increase the number of lines by setting the value yourself (the default is 3), or set the scrolling to one screen.

Windows 10 in this respect compares favorably with the seventh modification. Upon entering the mouse and touchpad section, the user immediately sees the scroll bar. As the number of lines increases, the fader (slider) is moved to the right. In addition, there is an option to enable scrolling of inactive windows on hover.

Double click control

Now let's see how to increase the mouse sensitivity in terms of speeding up the response when you double-click the main button.

This is done on the "Buttons" tab, where by moving the slider in the corresponding line to the right, the desired mode is set. Additionally, you can use the sticking function to select objects by hovering the cursor without clicking, but as practice shows, most modern users do not use this function.

Changing the cursor movement speed

Finally, in the question of how to increase the mouse sensitivity, special attention should be paid to the parameters of the cursor movement on the screen.

To set the desired value on the tab of the pointer parameters, a string is used, which also contains a slider. Moving to the right increases the speed. However, setting too high parameters is only possible if the person has sharp eyesight. In addition, it is precisely this speed that can be used on monitors with large screen diagonals (here it is justified). But on screens with diagonals of 14-15 inches it is possible that the cursor will "jump" from one edge to another.

A few final words

Despite the above methods of adjusting the basic characteristics of a computer manipulator, we can say that the question of how to increase the sensitivity of the mouse is purely conditional, since each user has his own preferences. In addition, the setting can also depend on many additional factors (type of mouse, screen size, etc.). By the way, for game controllers, drivers are supplied with special utilities, allowing you to perform not only standard configuration steps, but also many additional operations. Therefore, it is better to use such accompanying utilities for calibration.

If you are using a desktop or laptop with windows 10, then of course you are using a touchpad or mouse - a4tech bloody, Logitech, razer, defender, SteelSeries and so on.

If you experience some inconvenience while working, then on windows 10 you can easily customize the mouse button control.

To correctly configure the mouse buttons, first of all, you need to set the optimal cursor sensitivity, movement speed, sharpness and undoubtedly "twist" the wheel, the capabilities of which not everyone uses to the fullest.

In this case, special attention should be paid to the inversion, right, left and, if there are side buttons, in particular to the response.

For maximum convenience, the mouse click itself can be configured for one or double click (click).

NOTE: For the best experience, it is best to use a wireless bluetooth / radio mouse with five (side) buttons.

Basic mouse button settings in Windows 10 on a computer or laptop

IMPORTANT: These settings are available for most devices, but the most advanced dedicated mouse or touchpad can have many advanced settings that are displayed in a separate properties window.

To adjust these parameters, read the instruction manual of your device.

To configure the basic settings for your mouse or touchpad, you must enter the application settings.

To do this, open the "Start menu" by clicking on the button in the lower left corner of the screen. Then click the Options button.

Now go to the "Devices" section

In this window, the first item indicates the button that will be the main - by default, "left" and almost everyone uses it except for left-handers.

The second item defines the mouse wheel. Press to select one of the options: scroll multiple lines at a time or one screen.

The easiest way to check these parameters is to open any site (or use the one you are currently on) and see how it turns out better.

If you select the wheel for scrolling several lines, then the slider below will become active and you can set the number of scrolled lines.

Just click on it and drag left or right to decrease or increase the scroll size.

In the third paragraph, you can enable scrolling of inactive windows when you hover over them.

The latter option only applies to the touchpad. Click on the drop-down menu to select the touch panel delay.

The longer the delay, the more time you have to press the touchpad when you're done typing on the keyboard.

You can choose long, medium, short, or turn everything off. The default is medium latency.

Advanced mouse button sensitivity settings in Windows 10

If you want to see other mouse settings, click on the line: "Additional mouse options". This will open the "Mouse Properties".

If you put a checkbox in front of the line: "change the assignment of buttons", then the main one will change from left to right or vice versa.

The image on the right shows which mouse button is currently primary (in blue).

The last item on this tab is to enable and configure sticking. You can activate it by checking the box next to the line: "Enable sticking", after which the settings will become available.

To access the options for adjusting the mouse cursor, click on the "Pointers" tab at the top of the Properties window.

How to adjust the sensitivity of the mouse button on Windows 10

To access other cursor settings, such as cursor sensitivity, click on the Pointer Settings tab at the top of the Properties window.

In it, you can adjust the sensitivity and speed of the cursor movement on the screen using the speed selection slider: move it to the left or right to decrease or increase the speed of the pointer movement.

There are several more settings on the same tab, but they are not so important to be specifically described.

On the tab: "Wheel" you can specify how many lines the page of the site, book or documents should be scrolled by.

The rest of the options are for advanced users.

In the Windows 10 operating system, just like in previous versions of Windows, you can customize every little detail of your mouse.

As you can see, the windows 10 settings are simplified and accessible, where you can configure the basic parameters and access the detailed mouse properties setting window, with a large number of options and the interface familiar to users of earlier Windows versions... Good luck.

If you think that the mouse pointer is moving too slowly across the screen, you can speed it up slightly using the operating system settings.

However, unfortunately, these settings are not always sufficient, since the mouse speed may depend on the device itself. For example, by connecting two different mice alternately to your computer, you may find that when you work with them, the pointer moves across the screen at different speeds, although you have not made any operating system settings.

Let's take a look at the options for mouse acceleration.

The first option is to use Windows settings. These settings are made in.

You need to find the "Mouse" section and go to the "Pointer Options" tab in the properties window that opens. Next, move the slider to a position that will provide an acceptable pointer movement speed for you.

But since the speed can also depend on the design features of the mouse itself, it is likely that even with the pointer parameters set to maximum, you will want to add more speed.

The fact is that Control Panel allows us to visually change some settings Windows that are stored in the registry. But through Control Panel only a small part of these settings are available.

So, open the editor and find the section HKEY_СURRENT_USER \ Control Panel \ Mouse

Here we will be interested in the following parameters:

• MouseSensitivity- the sensitivity of the pointer to mouse movements;
• MouseSpeed- cursor movement speed;
• MouseThreshold1- the speed of movement of the mouse, when exceeding which the speed of movement of the cursor will be doubled;
• MouseThreshold2- the speed of movement of the mouse, above which the speed of movement of the cursor will quadruple.

It is the parameter MouseSensitivity we change the slider in the mouse properties window. You can experiment with it and set larger values.

In addition, there are three more parameters that allow you to influence the speed at which the cursor moves across the screen. In general, more details about any registry parameter can be found on the website technical support Microsoft, but mostly all of the notes there are in English, so I'll translate some of the highlights.

So the parameter MouseSpeed determines how fast the cursor will move in response to mouse movements.

Options MouseThreshold1 and MouseThreshold2 determine at what moment and to what extent the speed of the mouse cursor will additionally increase.

That is, when the mouse moves slowly, the system moves the cursor at a constant speed specified by the parameter MouseSensitivity... This speed is directly proportional to the speed at which the mouse is moving. But if the mouse starts moving faster than the values ​​specified by the parameters MouseThreshold1 or MouseThreshold2, then the system will respond to the acceleration of the cursor movement and the cursor will move two or four times faster than the same movement of the mouse.

So the parameter MouseSpeed can take three values ​​- 0 , 1 and 2 .

0 - no acceleration;

1 MouseThreshold1, the cursor moves at twice the normal speed;

2 - when the mouse speed reaches or exceeds the parameter value MouseThreshold1, the cursor moves at twice the speed, but when the mouse speed reaches or exceeds the parameter value MouseThreshold2, then the cursor begins to move four times the normal speed.

On computers running under the Windows operating system, the mouse is the main control device. The principle of its operation is based on the registration of movements and their transfer operating system for synchronous movement of the pointer on the screen.

At the base of the optical-mechanical mice there is a rolling unit based on a ball, the rotation of which is transmitted to the measuring system. The measured value and direction of the displacement of the device is transferred to the computer.

Optical mice, unlike optical-mechanical ones, do not roll over the surface, but slide over it, evenly illuminating it with a beam of rays. The reflected rays are registered by a sensitive element. The mouse, as it were, "sees" the microroughness of the surface and registers its displacement relative to them.

Other devices such as trackballs and touchpads also belong to the mouse family. The trackball is stationary, and its motion sensor - a ball - rotates with your fingers.

Trackballs, like mice, are optical-mechanical and optical.

The touchpad is Touchpad... To move the pointer, you just need to slide your finger across it. Typically, touchpads are used in portable computers - laptops.

The buttons are used to issue commands using the mouse. A standard mouse has only two buttons: primary (usually left) and special (usually right). If the mouse has other controls - buttons, wheels, etc. - they should be considered optional and optional.

To configure the mouse and its analogs, use the Properties: Mouse dialog box. To open it, double-click the Mouse icon in the Control Panel window (Start - Control Panel).

The most important mouse settings are adjusting its sensitivity and double-clicking the main button. The selection of the optimal settings depends on the characteristics of a particular model, as well as on the usual style of work.

The amount of displacement of the screen pointer at a single movement of the mouse depends on the sensitivity of the mouse. Check if you can slide the pointer across the entire screen diagonally without lifting your wrist from the table surface, that is, moving only your fingers. If this exercise does not work, then the sensitivity of the mouse leaves much to be desired and needs to be increased. Reverse operation- decrease in sensitivity - may be required when people work with a computer who are not quite familiar with the reaction of the system to their actions, for example, small children.

Adjusting mouse sensitivity

1. Open the dialog box for configuring mouse properties: Start - Control Panel Mouse.
2. Click the Pointer Options tab.
3. Mouse sensitivity is set using the slider. Set the speed of the pointer movement on the Move panel. The more the slider is to the right, the more sensitive the mouse is, the further the pointer moves with a single displacement of the device.
4. Here it is also recommended to select the Enable increased pointer positioning precision checkbox. With this setting, the pointer first moves slowly and then accelerates. This improves accuracy over short distances, which is important in application programs, for example, in graphic editors... In active computer games, where the mouse is used to aim the weapon at the target, this setting can have a negative effect by reducing the player's reaction speed.

A double click is recognized by the time elapsed between two consecutive clicks of the primary mouse button. If it is too small, two clicks are perceived and processed by the operating system as one normal click. If the interval is too large, the system will respond to two different clicks. The time interval at which the system registers a double click has a certain tolerance and can be configured.

Double click setting

1. Open the dialog box for configuring mouse properties: Start - Control Panel - Mouse.
2. The double-click options are configured in the Double-Click Speed ​​pane. The folder icon next to it is the scan area. If two consecutive clicks are perceived as a double-click, then the state of the folder changes - it opens or closes.
3. The double-click interval is adjusted with the Speed ​​slider.

In modern models of mice, in addition to buttons, there is a wheel. It is used to scroll through documents. If such a mouse is used, the Wheel tab appears in the Mouse Properties dialog box. It will come in handy if the computer is often used day of work with texts. By setting the scroll switch to the specified number of lines, you can set the number of document lines corresponding to the rotation of the wheel by one click. An alternative is the Scroll one screen at a time switch. In this case, turning the mouse wheel is equivalent to pressing the PAGE UP or PAGE DOWN key,

Recently, more and more special models of manipulators can be seen. They feature an increased number of buttons, two wheels, or other unusual controls. Customization of these tools is provided by specialized drivers.

Each of us has a certain speed of movement of the mouse cursor. However, I noticed that whatever the speed, you still get used to it after a while. True, this time can last either one day or several weeks. In order not to torment yourself, in any operating system there is an opportunity to adjust the sensitivity of the mouse. This is what I want to tell you about.

First of all, we need to get into the section with parameters. To do this, go to the control panel by clicking on the "Start" button.

Then select the "Mouse.

A small window with settings will open in front of you. In the settings window, select the "Pointer Options" tab. At the top of the panel is an item called "Move". Here you can also see a small slider labeled "Set the speed of the pointer movement." Start moving the slider to one side or the other to change the parameter. If you move the slider to the left, then the speed of cursor movement decreases, and if to the right, then, accordingly, increases. Do not forget to click on the OK button at the end of this process.

Be sure to check the box next to Enable Enhanced Pointer Precision. In this case, the movement of the cursor is much more accurate.

Among other subsections, you might be interested in the Mouse Buttons tab. Here you can swap the assignment of the right and left buttons. This function may be useful, for example, for those people who use their left rather than right hand more often.

Much more interesting is the item "Double-click speed". What is this anyway? This parameter tells how quickly you need to double-click on a folder (or icon) to open it. This parameter is very important for people who use a computer quite recently - if the speed of a double-click is high, then the user often simply does not have time to make this very double-click and the folder simply does not open. The lower the click speed, the slower you can click on the right mouse button when opening folders or launching programs. You can test the click speed right in this window - click on the yellow folder. When finished, click OK.

The "Wheel" tab will allow you to adjust the scrolling of the lines at one turn. By default, one turn of the wheel scrolls three lines and this is quite enough, but for someone it may not be enough. This is also a kind of mouse sensitivity, which makes it faster and more convenient to work with this device.

That, in fact, is all. In principle, the tuning procedure is simple, but it can take some time, since it is very difficult to achieve ideal parameters the first time. All comes with experience.

P.S. By the way, now there are mice on the market that allow you to adjust the sensitivity using a pair of buttons located on the body of the device. As a rule, these are gaming and rather expensive mice.

A mouse (mouse) is a manipulator that controls a pointer (cursor). The double-click speed and sensitivity settings can be considered the most important in the settings of this device. The amount of movement of the cursor at a single movement of the mouse depends on its sensitivity. Pick up optimal settings it is necessary depending on the style of work you are accustomed to and the characteristics of the model of your manipulator.

What is sensitivity?

The sensitivity is called resolution. By changing the resolution value, you adjust the speed of the cursor movement. This is necessary, for example, for actions that require increased accuracy - in computer games or when working with graphics. Reducing the sensitivity is necessary when small children work on the computer, who cannot fully control the system's response to their actions.

Before you decrease the sensitivity of your pointing device, try to move the cursor diagonally across the entire screen. When doing this, do not lift your wrists off the table surface. If it works, then the sensitivity does not need to be reduced. Modern models of manipulators are equipped with additional controls: two wheels and a large number of buttons. Some newer models are equipped with a dedicated button. For them, the issue of mouse sensitivity is easily solved. How to reduce it? This can be achieved at the touch of a button.

If you have a regular model, which does not provide for sensitivity adjustment, then this can be done programmatically in the operating system.

How to reduce mouse sensitivity in Windows 7?

Let's take a look at how to set up a mouse in Windows 7. This setting allows you to change button assignments, mouse pointers, mouse sensitivity, double-click speed, and other functions. But first things first. The dialog box you need to get to first is called "Properties: Mouse". This is done very simply. In order not to go far on any control panels, select "Start" and write "mouse" in the search bar. Select the result that appears. We get into the window we need, which has several tabs:

• pointer parameters;
• mouse buttons;
• pointers;
• equipment;
• wheel.

In the "Pointer parameters" tab, in the "Move" section, we see a slider with the captions "Below" and "Above". The higher the sensitivity, the faster the mouse moves across the screen. The more to the right the slider pointer is, the more sensitive the mouse is. The optimal position for many users is slightly to the right of the middle. Since we are faced with the question of how to reduce the sensitivity of the mouse, then, accordingly, pull the slider towards "Below". Then click "Apply" and Ok.

Windows 10

Many people don't know how to decrease mouse sensitivity in Windows 10. So, we practically studied this issue. The next point is how to reduce the sensitivity of the mouse in the top ten. Open the properties settings dialog box: "Start" - "Control Panel" - "Mouse". The settings window that appears is somewhat different from its counterpart in Windows 7. But the basic options remain the same. Therefore, further we proceed according to the scheme: "Pointer parameters" - "Move" - ​​"Below" - "Apply" - Ok.

It is very important to adjust the parameters of the mouse, because the comfort of working at the computer depends on it. This device is a fiducial for controlling the pointer and giving various commands to the computer.

On ordinary stationary computers, it is impossible to control the pointer without a special device called a mouse. Sometimes users are not satisfied with the speed at which the mouse pointer moves. The reason for the low sensitivity may be the specifics of the mouse itself or the settings in Windows system... Now let's look at a way to change the mouse speed in the Windows 7 operating system.

Mouse speed in Windows 7

To change the sensitivity, go to "Control Panel" - "Hardware and Sound" - "Mouse" - "Pointer Options" and in the "Move" item set the desired pointer speed. After the change, click on "Ok". That's all, the pointer speed is set.

In Windows 8, the sensitivity changes in the same way as in version 7.

Customization Windows mouse 10 also occurs in a similar way as described above.