What to put a password to the computer. How to install a login password: Set up your account. Installation of the password in the BIOS

In the modern world, data protection is one of the main factors of cybersecurity. Fortunately, Windows provides such an opportunity without installing additional software. The password will ensure the safety of your data from foreign and attackers. A particular relevance of a secret combination acquires in laptops, which are most often susceptible to theft and losses.

The article will consider the main ways to add a password to a computer. They are all unique and allow you to enter the system even using the password from account Microsoft, No. this defense Does not guarantee 100% of the security from the penetration of extraneous personalities.

Method 1: Adding a password in "Control Panel"

The method of passing through the "Control Panel" is one of the easiest and most used. Perfectly suitable for beginners and inexperienced users, does not require memorizing teams and create additional profiles.

  1. Press "Start" menu and click "Control Panel".

  2. Select the tab "User Accounts and Family Safety".

  3. Click on "Changing Windows Password" In chapter "User accounts".

  4. From the list of action over the profile, select "Creating a password".

  5. In a new window, there are 3 forms to enter the basic data that is necessary to create a password.

  6. The form « New password» Designed for a code word or expression that will be requested when the computer starts, pay attention to the mode « Caps Lock.» and keyboard layout when filling it. Do not create very much simple passwords like "12345", "QWERTY", "YTSUKEN". Adhere to Microsoft Recommendations on the selection of a secret key:
    • The secret expression cannot accommodate the user account login or any of its component;
    • The password should consist of more than 6 characters;
    • In the password it is advisable to apply the title and capital letters of the alphabet;
    • In the password it is recommended to use decimal numbers and non-alphabetic characters.

  7. "Password confirmation" - The field in which you want to enter a previously invented code word to eliminate errors and random pressing, as the entered characters are hidden.

  8. The form "Enter a password tip" Created to remind the password if you can not remember it. Use the data known only to you in the prompt. This field is optional, but we recommend to fill it out, otherwise there is a risk to lose your account and access to the PC.

  9. When fill in the required data, click "Create a password".

  10. At this stage, the password installation procedure is over. You can see the status of your protection in the Changeline window. After rebooting, Windows will require a secret expression for the entrance. If you have only one profile with administrator privileges, then not knowing the password, access to Windows will not be possible.

Method 2: Microsoft Account

This method will allow you to access the computer with a password from Microsoft's profile. Code expression can be changed with email address or phone numbers.

  1. Find "Computer Settings" in standard windows applications "Start" menu (So \u200b\u200bit looks like on 8-ke, in Windows 10 gain access to "Parameters" You can click the corresponding button in the menu "Start" or by using key combination Win + I.).

  2. From the list of parameters, select the section "Accounts".

  3. IN side menu Click on "Your Account", Further "Connect to Microsoft account".

  4. If you already have Microsoft account, enter e-mail, phone number or Skype username and password.

  5. Otherwise, create a new account by entering the requested data.

  6. After authorization, you will need confirmation with a unique SMS code.

  7. After all Windows manipulations, the password from the Microsoft account for the entrance will be requested.

Method 3: Command Line

This method is suitable for more advanced users, as it implies knowledge of console teams, but it can boast the speed of its execution.

Conclusion

Creating a password does not require special training and special skills. The main complexity represents inventing the most secret combination, not installation. At the same time, it is not necessary to rely on this method, as a panacea in the field of data protection.

If your computer is in your house, one for the whole large seven, and everyone wants anyone that no one intervene in the personal space of each other - in this case, the output one - you need to create a password for each user account. But how to install a password on a computer?

Consider this question in more detail on the example of two operating systems.

Installing a password for Windows 7

All user accounts in Windows by default have an administrator level access level. Those. All users can make changes to the computer (install various programs and drivers). Also, by default, the passwords are not provided in Windows, which means the protection of our computer is missing before third-party users.

The password on the computer on Windows 7 is installed in the following order:

All - password installed!

Installing a password for Windows XP

The password when you turn on the computer running XP is made made:

That's all: the password has been created and the password account is available only to you. To end the procedure, it is recommended to restart the computer. As you can see, put a password on the envelope of the computer turned out to be at all difficult!

If you are not the only one who uses a computer, it makes sense to create another account with limited rights, prescribing a specific circle access (for example, Internet access, games, etc.).

Similarly, you can not only install, but also change the previously exposed password.

To the question of choosing a password

Before starting directly to install the password, it must be invented. It would seem - nothing complicated, but many users allow mistakes at this stage.

You should not use for a password any publicly available information about you - such as your name or surname, the names of your children or date of birth, both your own and close relatives.

Exclude with password options beaten words, such as password, login, no-Parolli, 12345 and so on. Why don't these words come for passwords - because when hacking a computer, scammers or viruses check them first, in the hope of our laziness when creating a password. The smaller the password will be associated with you or with well-known words, the higher it will be its degree of reliability.

The most reliable will be a comprehensive password, combining numbers and letters prescribed by different registers (a combination of capital and title - Example: Mountains25).

Also consider that the minimum password length for Windows is 6 characters.

In complete, we note that sometimes there is no need to protect the entire computer if you need to protect only part of the information. In such cases, it is enough to install a password to the folder, which we wrote about.

The price of information is high. Often an order of magnitude higher than the price of its carrier - personal computer or laptop. And valuable information needs protection. How to make another person, especially an attacker, could not get to it?

The first line of protection is simple, but effective, this is passing the entrance to operating system. For many, this is an obstacle, but there are those who can easily cost it. The second protection line is to install a password on the BIOS and. You can only hack it for only a little, and sometimes impossible at all. Want to make a reliable bastion from PC? Today I will tell you how to put a password to the computer, so that it is not afraid that someone will break the confidentiality of your data.

How to put a password on the computer

Install password protection on the login in Windows

Windows 7.

To block access to the outsider system, launch the control panel and enter " user accounts».

Being in the account management section, click " Creating a password of your account».

Welcome in the next window the password phrase and confirmation. Additionally, create a recpubor tip, which will appear on the screen after the failed entry. Save the setting and exit. Everything.

Windows 8.1 and 10

In the "eight" and "dozen" password protection is established through system application « Parameters».

To get into it on Windows 8, open the miracle buttons panel and click " Parameters».

We will find the section " Accounts"And come in" Input parameters».

In windows 10 application " Parameters»Starts from the menu" Start».

Next steps in Windows 8.1 and 10 are the same.

Go through the section " Accounts" in " Input parameters"And I can click under the word" Password»Button" Add».

In the next window, set the code phrase, repeat it again and write the hint - everything is as in Windows 7.

In addition to the password phrase, you can use the PIN code to enter Windows 8 and 10 (it is binding not to the account, but to an instance of the device) and a graphic password-picture.

To set the PIN code, click the button " Add».

To create a graphical password-picture, move to the section of the same name.

Select the image - any picture that is stored on the computer.

After downloading, click " Use this picture"And draw 3 simple figures on it - what will easily be remembered and not for sure. Repeat the picture 3 times and click the save button.

Pass hard drive and access to BIOS

Before proceeding to further operations, write down in advance invented password phrase on external carrier (Best of all - on paper) and save in a safe place. Note that BitLocker encryption is practically not possible!

Almost the same can be said about Passwords BIOS, especially if you have a laptop. The bulk of laptops, besides the most budget, stores them separately from other settings - in the non-volatile EEPROM memory, and (disconnecting the battery element or permutation of the Clear_cmos jumper) here does not help. Most often to reset this data is overwriting on the programmer.

We use BitLocker

First, a couple of words about what BitLocker is. This is systemic windows component 7, 8 and 10, which allows you to encode information both on the entire drive and in a separate section. After encryption, the disc can be used as usual.

In the homepage, domestic and professional editions of Windows 7, in Windows 8 Core and home windows versions 10 BitLocker is absent. If this is not your case, act further.

  • Go to the folder " A computer"And open context menu Section to be protected. Click " EnableBitLocker».

  • In the next window, we note " Use a password to unlock the disk", We will approve the code phrase and click" Further».

  • We specify the location of the recovery key that is useful if you have access to access.

  • Select the encryption area (the entire disk or just occupied place).

  • And finally, click " Start encryption».

Pass BIOS.

BIOS Password Protection Closes Access to the most utility BIOS. SETUP and will prevent unauthorized operating system boot. It is installed very simple:

  • Drive the BIOS Setup (who does not know, it needs to be done immediately after turning on the computer). Which key for this is intended, indicated at the bottom of the maternal screensaver.

  • Moving by pressing the arrow buttons, go to the section " Security" Options we need are called " Change Supervisor Password."And" Change User Password." The first sets the administrator password, which has access to all the BIOS settings, the second user who can only view them and change something minor, like the time and date.
  • We introduce into the window " ENTERNewPassword.»Invented code (maximum 8 characters).
  • Press F10 to save and exit.

If your version of the BIOS Setup looks a little differently - as on the screenshot below, you do not need to go anywhere. Options " SUPERVISOR PASSWORD."And" User password.»Are in the right half of the main window.

IN graphic versions BIOS - UEFI, which in recent years have all desktop motherboardsThe password installation option can be anywhere. Gigabyte products, for example, it is in the section " System." Parameter " SET."In my example, it means that protection is activated.

Now a few words about how to pass into the BIOS. This measure ensures the maximum degree of protection, but at the same time it is the most dangerous. Forgotten code It is impossible to restore any means. It is stored in the constant memory of the disc controller and on the secure service sector. Since this data is checked, even the replacement of the controller will not help remove the lock.

The disk passing option is also in the section " Security"And called" SET.HDD.Password." However, it is not present in all versions of BIOS. If you do not have it, it means that it is not supported.

Password security information is useful, but sometimes excessive. I repeat once again: if you do not want to protect your data from yourself, keep recubibly passwords as Zenitsa Oka, especially when experimenting with BitLocker and BIOS.

If several people use one computer, then there may be a need to hide personal data (photos, correspondence, files) from curious people. You can solve the problem by installing the password to the computer at the entrance. The sequence of actions depends on the version of the operating system. Consider all possible ways.

How to put a password on a computer when you turn on Windows 7

In Windows, you can create accounts for each PC user with individual rights and restrictions. To enter a specific account, you will need to enter the code. Consider how to put a password on a computer with Windows 7.

« Start» → «» - ….

« Creating an account" Need to come up with " Name"And save changes. Followed by "".

In a special field, we enter the invented code. It can contain letters, numbers and special characters. There are no restrictions on the use of Cyrillic or Latin.

Very important! Password is sensitive to the register. That is, the "valley" and "valley" are different words. Therefore, it is important that the keyboard is disabled.

We maintain changes and reboot PC. The next time you enter the account, a password window will appear.

How to install a PC password when entering Windows 8.10

You can protect your computer from Windows 8 as well as with Windows 7.. We bring the cursor to the right panel and select "".

On the tab " Users»Click on" ".

After the introduction of symbols, click Ready" That's how to quickly set the password to the computer at the entrance.

In Windows 8, you can create graphic passwords in the form of a combination of circles, lines and points. However, the user will need to fill the size of the figures and their direction otherwise unlock the PC will not work.

How to pass a computer with Windows XP OS

You can also put a password on the computer via the menu item " Start – – ».

In the next window, click on "".

We enter in the row invented code (combination of numbers, letters and characters). Invented password you need to specify twice or copy with top string And insert into the bottom. After that, press "".

Restart PC. Now every time you start the user account, you will need to specify the invented code.

Blocking system via BIOS

The input in the BIOS OS is carried out before booting Windows. Therefore, to put a password to a computer through the BIOS, you need to restart the PC. As soon as the first window appears with the name of the system to press and hold F2-F8 + DEL (depending on the version of the OS).

In the menu that opens, select the item "".

A window will appear to enter password in length in 6 characters. It will not work Cyrillic, as it is not possible to switch the language.

In the next window will need to confirm password. The successful completion of the operation shows the message:

So the password is set to enter the BIOS OS. To block the account, you need in paragraph " Advanced Bios. Features."Select subparagraph" ".

If this line is installed " Setup."The access code will be requested only when the BIOS is loaded. You need to change it on "".

To save changes we click F10. . That's how to quickly set the password to the computer at the entrance.

"Parental Control" - child protection

Parental control Computer is a range of programs designed to limit the use of PCs by children. With their help, adults can block sites " 18+ ", Time is on the Internet and in general, the period of use of the PC. " Parental control"You can connect to the tools of the operating system through the menu item in the" ".

This feature is connected to a specific account. If it is not, then for a child you first need to create account, and then configure access parameters to information.

We change access parameters.

The easiest way to limit the time interval, that is, set the time to which the user will be able to enter the operating system. The schedule can be adjusted by day of week.

Separately indicates access to games.

For each application separately:

For online Games Your settings panel.

Please note: To fulfill most instructions from this article, you must use local accounting windows recording with administrator rights.

How to put a password on a computer with windows

If other people have access to your computer, it is reasonable to protect Windows password. So your settings and data will be safe: no one can view or change them without special knowledge. Windows will request a password when you turn on the computer, when changing your account or after the sleeper is output.

  1. Open the "Start" → "Parameters" section (gear icon) → "Accounts" → "Input parameters".
  2. Click "Add" under the Password item.
  3. Fill in the fields according to the prompts of the system and click Finish.

How to put a password on Windows 8.1, 8

  1. In the right sidebar, click "Parameters" (Icon in the form of a gear) → "Changing computer parameters". In the Opening window menu, select "Accounts" (or "users"), and then "input parameters".
  2. Click on the "" button.
  3. Fill in the fields, click "Next" and "Done."

How to put a password on Windows 7, Vista, XP

  1. Open the "Start" section → "Control Panel" → "User Accounts".
  2. Select the desired account and click "Create a password" or immediately click "Creating a password of your account."
  3. Fill in the fields using the system prompts and click on the "Create Password" button.

If extraneous does not have physical access to your computer, it is possible to disable protection better. It will save from the need to enter a password each time the system starts.

  1. Use the Windows + R keys combination and enter command line netPlwiz (or control UserPasswords2.If the first command does not work). Press ENTER.
  2. In the window that opens, select the account in the list, for which you want to remove the password, and remove the donkey near the "Require user name and password" item. Click OK.
  3. Enter the password, confirm it and click OK.

Windows will stop requesting a password only when the computer is turned on. But if you block the screen ( windows keys + L), you will leave the system or the computer will switch to sleep mode, then the password request will still appear on the display.

If the option "Require a username and password" option will be inaccessible or you want to disable, but completely remove windows password, try another way for more experienced users.

To do this, open the Account Management section on one of the instructions at the beginning of this article.

If in the open section it will be said that you are using the Microsoft online profile (Email and password), disconnect it. Then use the prompts of the system to create a local profile, but in the process do not fill in the password fields.

After disconnecting the account microsoft records The system will stop synchronize your settings and files on different computers. Some applications may refuse to work.

If local profile will be initially active in the account management menu, simply change the current password, leaving the fields for a new password empty.

When removing the old password, the system will never request it until you add a new one.

How to remove the password when leaving sleeping mode

If you disable password request when launch WindowsThe system can still request it when waking. But you can deactivate this feature separately using these instructions.

  1. In Windows search string, enter "Power" and click on the found link to the section with the same name. Or find it manually through the control panel.
  2. Click "Password Request when Awakening", then "Changing the parameters that are not currently available" and check the option "Do not request a password".
  3. Save the changes.

How to remove a password when waking up Windows XP

  1. Open the "Control Panel" section → "Power supply".
  2. In the window that appears, click the Advanced tab and remove the donkey near the Password item when you exit the waiting mode.
  3. Save the changes.

If you forget the password and can not enter the local profile windows administrator, not necessarily reinstall OS. There is a way out simpler: Password reset. To do this, you will need another computer, USB drive and free utility To reset the password.

Create a bootable flash drive on another PC

  1. Download Lazesoft Recover My Password installer to any available computer.
  2. Run the downloaded file and install.
  3. Connect the USB flash drive to the computer. If necessary, make a copy of files stored on it, since all the information has to be deleted.
  4. Open Lazesoft Recover My Password, click Burn Bootable CD / USB Disk Now! And create blood flash drive Using program prompts.

Load the computer using a flash drive

  1. Insert the prepared USB drive into the computer, the password from which you forgot.
  2. Turn on (or reboot) the PC and, as soon as it starts uploaded, press the transition key to the BIOS settings. Usually it is F2, F8, F9 or F12 - depends on the manufacturer of the equipment. Most often desired key Lights on the screen during BIOS boot.
  3. Being in menu Bios., go to the boot download section, if the system has not redunted you there at once.
  4. In the Boot section, install a USB flash drive on the list of devices that appears on the screen. If you do not know how to do it, look around - there must be tips about the control.
  5. Save the changes.

If the BIOS is also protected by a password, which is unknown to you, then you will not be able to reset the password windows protection Using Lazesoft Recover My Password.

Perhaps instead of classic BIOS you will see more modern graphic interface. In addition, even in various old versions of BIOS, the settings may differ. But in any case, the order of action will be approximately the same: go to the boot menu, select the desired USB drive and save the changes.

After that, the computer should boot from the flash drive to which the Lazesoft Recover My Password utility is written.

Reset the password in Lazesoft Recover My Password

  1. Select Lazesoft Live CD (EMS Enabled) and press ENTER.
  2. Reset the password for your account with the help of Lazesoft Recover My Password.
  3. Restart.

After these actions, Windows will stop requesting old passwordAnd you can ask a new instruction at the beginning of the article.