Wireless TP Link TL WR741ND router. In the case of TP-LINK TL WR741ND, Wi-Fi is installed simply. Communication, Interfaces and Equipment

It is no secret that the regular firmware in low-cost home routers often does not meet the requirements of users or in it lacking any opportunities that have become necessary in development home network. Usually this refers to the support of other options for connecting to the provider, IPTV technologies, extended management of routes and similar features that sometimes forget to indicate in official specifications.

In this material we will try to see how suitable a budget router for firmware of the famous OpenWRT family. For the first acquaintance, the TP-LINK TL-WR741ND model was used, which has long been present on the market. It uses the initial level platform, does not differ in the large volume of flash memory or availability uSB ports. Interestingly, this device was slightly updated several times with the conservation of the name. The manufacturer changed only the version, in this material we worked with V4.20 (you can clarify it on a sticker on a box or router), which is the appearance, and hardware differs from the first revisions.

Supplies and appearance

Mass models of routers have standard delivery kits - a device, an external power supply (this time 9 V 0.6 A), a removable Wi-Fi antenna, a network patch cord, leaflets and a CD with an electronic version of the documentation. Everything is really necessary is present, and from the network cable could be abandoned.

The design of the box is also traditionally - photo of the router, use options, specifications. As we talked above, the modes of connecting to the Internet and compatibility with the multicast flows are not a word. On the site, of course, there is more data, but still some questions remain.

By appearance The router is completely ordinary - strong matte white plastic case, a group of LEDs on the front of the top cover, behind five network ports (100 Mbps), input of the power supply unit with switch, antenna connector, reset buttons and quickly connecting wireless devices.

It is worth noting only too closely located indicators - it will be difficult to read their condition at a distance (all the more so that everyone has the same color) and not the most successful location of the QSS button (WPS) - between the antenna and the WAN port.

At the bottom there are four rubber legs and two holes for mounting on the wall.

Hardware configuration

To implement such a configuration, the router usually grabs a minimum chipset. Version 4.20 Platform consists of an ATHEROS AR9331 processor operating at 400 MHz, 32 MB random access memory, 4 MB Flash. Radio block and five-port switch 100 Mbps are built into the processor. 802.11n is supported at 2.4 GHz frequency with speeds up to 150 Mbps. On the pCB You can see the second antenna, but it is not possible to determine whether it is used for anything. There are no radiators on the processor and other microchips. During testing, even with a large load, the processor temperature differed little from room floor.

On the board there are elements to implement a console connection, so if you have experience with a soldering iron, it will not be a problem.

Features and performance of the foot firmware

The official deliveries of this model of the router to our market have a pre-installed Russian firmware, which has complete localization and several additional features (in particular, IPTV support). However, on technical support sites in currently Only international (English-speaking) versions are presented.

As a regular firmware, we used a newer non-cabled version of 3.12.11 Build 120320 REL.50684N, released in the spring of this year. Opportunities are quite characteristic of the class class under consideration. The Web interface of this version is only on english language. You can establish restrictions on access to it from the local network segment and the Internet.

For connecting to the Internet, constant and dynamic address, PPPOE, PPTP and L2TP are supported. Moreover, in the latest options, access to the network of the provider is supported. Help in the organization remote access Can the built-in DDNS client. Addresses in the local segment distributes the DHCP server, which supports the IP redundancy for the necessary Mac.

Wireless module can operate in mode open network, WEP and WPA / WPA2 (as with key phraseand through the RADIUS server). For additional protection, a filter of MAC addresses of wireless clients is provided.

There is a port broadcast function, support for DMZ and UPNP. Router has firewall With programmable rules, can skip PPTP / L2TP / IPsec traffic, implements the passage of FTP, H.263 and RTSP protocols through NAT. It is possible to restrict access to sites by their names.

The traffic control function allows you to allocate specific customers and services priority for download and sending data. The system options have firmware update, configuration work, event log (with the ability to send to email), setting the internal clock, change the administrator password, traffic statistics. These features will be enough for the overwhelming majority of users, if they, of course, are not some kind of very specific provider.

Note that changing some options requires a restart of the device, which is permissible in the classroom under consideration.

Performance testing was carried out on a special stand with when using the synthetic test of iXChariot. All options for connecting to the Internet were checked, the tests were carried out with one / two threads, as well as while simultaneously work sixteen threads. The results are presented in the following graph.

As can be seen in numbers, despite the budget class, TP-LINK TL-WR741ND is capable of providing 100 Mbps work with any connection option. This is especially impressive if you remember its hardware configuration. A few years ago, PPTP and L2TP modes on inexpensive routers often could not work at full channel speed.

The device supports access to local network Provider with a VPN connection installed. The second schedule shows the test results in this mode, while simultaneously loading data from the Internet and the provider's network.

It is quite expected that there are no limitations in speed.

The wireless device module supports 802.11b / g / n standards operating at 2.4 GHz and has one antenna and maximum connection speed of 150 Mbps. In fact, today this figure is reaches only in a private house or in the field, since the latest requirements of the Wi-Fi alliance prohibit devices to use two channels in the range of 2.4 GHz in the presence of adjacent networks. So the Intel 6205 adapter was selected for the test, which was connected at 72 Mbps, the maximum possible for 802.11n when working with one antenna and one channel. Recall that the adapter itself is a dual-band and with a speed support of 300 Mbps. Testing was carried out between wireless and connected to the LAN client segment.

Testing has shown that the actual speed corresponds to the equipment and modes used. It is 40-50 Mbps, and, given the router class, these numbers can be considered a good result. Access speed wireless client To the computer installed in the external segment, the computer has practically no difference from the specified numbers in any option to connect to the Internet.

When the article has already been completed and waited for its queue for publication, local office The manufacturer has released a beta version of the firmware (12.12.12 Build 121124 REL.66062N, you can download on the technical support forum) with the Russian configuration interface and some relevant for domestic users Functions - IPTV (in port allocation mode for the console or multicast, in the second case with Wi-Fi support) and VLAN 802.1q, which can be interesting for multiservice connections.

Alternative firmware

Although official firmware It is quite suitable for the implementation of the main scenarios of the router, for various reasons, it may be desire to improve the program capabilities of the model. Unfortunately, budget devices rarely implemented a regular installation option additional packages. So the only option may be an alternative firmware. But it should be noted that the TP-Link website states that the breakdown in the case of using third-party manufacturers is not a warranty case.

We, for our part, also note that work with alternative firmware may not be as simple as I would like. Versions of equipment I. software constantly changing, and not always the "last" means "best." In addition to following the instructions found on the network, it is advisable to use your own head. In some cases, it will be possible to restore the operability of the router only using additional equipment. On the other hand, the cost specifically this device Not very high, so it may well come up for the first workouts.

Describe in detail in the article all the possibilities alternative versions It is impossible. No one expects a laptop overview of the laptop of detailed information about Windows and all application programs for her. Fortunately, many projects have wiki and forums where you can find necessary information. At the end of the article, links to suitable topics in our forum are also indicated.

One option for the TL-WR741ND model under consideration is the well-known OpenWRT firmware. Getting started with her enough simple - you need to download the image new firmware From the project site and in conventional method Install through the Web interface. For mass user, certain difficulties will be associated with the lack of the usual web-interface in the basic supply. As a solution to this task, you can use Gargoyle - modified versionwhich has a built-in superstructure to control the firmware options through the browser.

Another way is to install already inside the OpenWRT LUCI package of a similar purpose. In the second case, it is advisable to have access to the Internet from the router for the convenience of installing additional packages.

OpenWRT capabilities are noticeably superior to the full firmware, especially if you know exactly what you need and have at least basic communication skills with the Linux family systems. But we must not forget about the limited hardware resources of the device under consideration, so it should not be loaded with "heavy" tasks.

To connect to the Internet, all the same options, also implementing simultaneous access to the local network provider are provided. However, the limited amount of the router flash memory does not allow simultaneously supporting LUCI and L2TP with simple commands (direct connection, PPPoE and PPTP do not have this problem). You can, of course, try to choose the necessary set of packages, but we simply refused to test the web interface in this mode. Setting in the console, of course, more complicated, but "more correct", especially if we are talking Not about "just run", and also "figure out how it works." Instructions in Russian on the launch of this type of connection are available on the project website.

Considering that the firmware of routers can significantly affect not only possibilities, but also on performance, we decided to carry out a similar one to the above testing of the speed of this version. The original firmware did not have comments on this parameter, so the test rather answers the question "rather than the speed alternative firmware will spoil" than it gives a serious reason to select version.

As expected, OpenWRT shows almost coinciding with branded firmware results. The only note concerns the restart of the device in L2TP multithreaded tests. Most likely, this can be corrected by updates of modules or additional customer setup. This is just one of those cases when the problem will have to be dealt with yourself, the official support for the manufacturer does not help here.

Setting the router involves changing the necessary parameters in the device interface. The purpose of the setup may be not only an Internet connection, but also operations such as, for example, installing a local network, change passwords, setting ports. This article provides the most understandable instructions "How to set up a TP-LINK WR741ND router" in various ways.

View and purpose of indicators

To display the activity of certain processes and functions, the router has special indicators located on the front panel of the router.

Indicators have intuitive icons that displays the activity of the processes or connections of the device:

  1. indicator on the device;
  2. router testing function for errors. If the indicator periodically flashes - the failures in the work is not detected, but if no - errors are found in the system;
  3. activity Wi-Fi module;
  4. lAN port indicators display connected computers to the device;
  5. connection Indicator device to the Internet;
  6. qSS system.

Connect to computer

Connecting the TP-LINKTLWR741ND router to a computer is carried out with using wi-fi or LAN cable.

Routher interface

To enter the router interface after its connection it is necessary:

  • open a browser;
  • enter the address 192.168.1.1;
  • enter login and password. Admin, Admin network default.

As a rule, the login and password of the device is indicated on the rear panel of the device itself. If your router is granted by your provider, the login and password parameters may differ.

Internet connection

Connecting the Internet is performed as using a setup wizard that can be run from a disk that is included with the router and using the web interface. To configure, you need the values \u200b\u200bspecified by the provider in the contract.

Before you begin to configure the router parameters, make sure that in your settings network card There is no IP address. For properly connections, a parameter must be selected - receive an IP address automatically.

Configuring the TP-LINK TL WR741ND router Kyivstar

To configure promotional routers from Kyivstar, it is necessary:

  • enter the device interface (192.168.1.1). Login and password are often changed by providers that provide a router, for example, a password and login - Kyivstar are installed on Kyivstar routers;
  • open tab "Network" and go to the "WAN" section;
  • choose" Dynamic IP address"And click" Save ";

To set up security, you must open the "wireless mode" and go to the "Protection" section wireless modeยป:


You can also change the standard wi-Fi password Networks on a more complex, which is capable of ensuring a higher degree of protection.

Fast setting

Fast setting The TP-LINK WR741ND router allows you to configure the parameters even users who do not have experience in installing an Internet connection. To quickly configure, you need to go to the device interface and select the "Fast Settings" menu. If you do not know the type of Internet connection, then during the installation process it is recommended to select "Auto-detection".

You will also need to specify your login and password provided by the provider. Using this feature, the program will offer the most appropriate settings for your connection. After applying all the settings, you must reboot the router for the entry into force of new parameters.

Video: Fast setting TP-LINK TL-WR741ND

Manual setting

To set the parameters of the VPN connection, you must perform the following operations:

  • open section "Network" menu and go to "WAN".
  • install the PPTP type "Wan Connection Type".
  • the USER NAME and PASSWORD fields are filled in accordance with the data from the contract.
  • if your provider provides individual settings of the IP address, maxi subnets, as well as the gateway you need to enter these values \u200b\u200bto the appropriate fields.
  • after entering all the parameters, click on the Save button.

To configure the PPPOE connection, you must perform:


To configure the connection without VPN connections Should:


It is also worth mentioning the fact that some providers apply filtering on the MAC address of the computer.

To solve this problem, it is enough to do the following:


Setup for MTS operators, Beeline (Beeline), Rostelecom

Setup For various operators, whether Beeline or MTC differs only by the values \u200b\u200bof IP addresses, subnet masks and other parameters. Some operators indicate these settings in the contract.

Wi-Fi Setup

Wi-Fi configuration is made from the "Configuring Wireless Mode" subsection, which is located in the Wireless Mode tab:


The local network

To configure the local TP-LINK TL WR741ND router, you must perform these operations:

  • go to the "Network" menu and open the DHCP section;
  • include "DHCP server";
  • specify the range of those addresses that will be assigned to computers in the home network. For example, the first address - 192.168.1.100 and the last - 192.168.1.200;
  • save settings.

The TP-LINKTLWR741ND router has a rather simple and understandable interface that allows you to install an Internet connection, as well as configure various parameters without any inconvenience. And thanks to fast configuration, the Internet connection is the simplest

Question answer:

How to configure the device on windows 7?

TP-LINKTLWR741ND router setup on various operating systems It differs only in the installation of the automatic parameter of the IP address when connected.

For Windows 7: Control Panel - "Network Management Center" - "Changing the Adapter Settings" - "Properties" Your Connection "-" Internet Protocol version 4 (TCP / IPv4) "- Open Properties -" Get an IP Address automatically ".

What are the features of the router settings on windows 8?

Connecting and configuring the Internet in the systemWindows 8 is similar to installing the Internet in windows system 7 Therefore, no unexpected problems in the configuration process you will have.

What to do if there is no disk with software?

How to configure without a disk? Most. simple decision In this situation is to download this software On the Internet, if there is no such possibility, then you will help you manual setting TP-LINKTLWR741ND Internet Internet Parameters.

Times when the whole family enjoyed one computer, remained in the distant past. Currently, most people have different gadgets that have the ability to connect to the Internet by Wi-Fi. In order to provide home a wireless connection, you need to install a router. That network device Allows you to create an access point and use the Internet without restrictions.

Most buyers prefer TP-LINK. And it is quite justified. For example, the TL WR741ND router supports all modern technologies. The data transfer rate is 150 megabits per second. In this device, this device has proven itself only from the good side. However, some users have a question: "How to set up a network device?". The answer to it can be found in this article.

Choosing a place

In order not to have problems with data transfer speed, you must start setting TL WR741ND from the selection of space. This issue exists certain rules. As you know, the Internet signal is significantly weakening if there are concrete partitions between the rooms. The instructions for the router states that the optimal location of the device is the center of the building or apartment. If you follow these recommendations, it turns out to cover the wireless network all over the area. It will be necessary to provide the location of the socket, as this model of the router works from the mains. And one more important point is the provider cable. Naturally, he must get to the device.

First connection

Before you configure the TP-LINK of this model, you must connect it correctly. To do this, you will need a router itself, a stationary computer or laptop. At the beginning of actions, it is desirable that all devices are turned off. Now it is necessary to collect all the components of the router. First of all, fasten the antenna.

The cable that is provided complete to the network device has a power adapter on one side, and on the other - the plug. The latter must be inserted into the jack with a round hole. It is located on the back of the housing. The power adapter is connected to the outlet.

For a cable provider provided a special port. In this model it is blue. There is a WAN marking under it. For the cable you must insert into this port. Wired connection, for example, with a computer or laptop, created by means of twisted pair. For this, four ports of yellow color are provided. They are signed as LAN with a sequence number from 1 to 4.

After all the above-described TL WR741ND connects were performed, the router setting is carried out through a stationary PC. To do this, turn on the device. The power button is located on the rear panel of the router. When presseding it from the front side, indicators are lit, which indicate working condition. Naturally, the computer must also be included.

TP-LINK TL WR741ND: Routher Setup

Checking again the correct connection of the network device, you can start software setup router. To do this, you will need to perform the following actions:

  • Run any online browser on your computer.
  • Enter digital code in the address bar. In the factory configuration (if custom changes were not made) it is 192.168.0.1. After that, you need to press ENTER.
  • A pop-up window will appear on the screen. It invites you to enter a login and password. Default - admin. Fill in both rows, confirm the action by clicking on the OK button. How to configure TP-LINK if you are not recognized as a password or login? In this case, it is necessary to make a reset settings to factory.
  • If everything is entered correctly, the router menu opens. On the left side will be subparagraphs. They need to find the "Fast Settings" tab. In the pop-up window, confirm the action and click "Next".
  • In the menu, where you need to enter an IP address, subnet mask and other parameters, you need to select "Auto-detection". After that, continue the setting by clicking on the word "Next".
  • If for some reason the automatic definition of all necessary parameters did not happen, you will need to enter them manually. This information Provided by the provider. As a rule, it is spelled out in the contract. If it is not, you need to call the Internet service provider and find out everything you need.
  • After these settings, the router will propose to create wireless connection. To do this, enter the network name, select the encryption method and set the password. The remaining parameters the user leaves unchanged.

The configuration process came to an end. Now you need to click on the "Finish" button. After that, the network device will reboot immediately so that new parameters entered into force. On this setting TL WR741ND is over. Now you need to test the wireless connection.

Wireless Internet. How to connect to Wi-Fi?

Having created a home wireless network, you can connect to it from any mobile deviceequipped with Wi-Fi module. To do this, take the following:

  • On the smartphone or tablet, run the search for wireless networks.
  • After all available Wi-Fi connections appear on the screen, select the necessary one.
  • The device will request a password entry that is saved in the router settings. If you dial it without errors, the connection will be installed.

In order to check the condition wireless connection, it is enough to use any browser or postal client. If the user has access to them, then everything is configured correctly.

Finally

All TP-LINK routers differ from competitors with simple setting. This model did not exception. From the foregoing information itself, it is suggested: even an inexperienced user can cope with these actions. And if for some reason it will be needed to return the factory settings, it will not cause difficulties. Completely sounds the question: "What is needed for this?". Reset TL WR741ND settings are extremely simple. The developers have two ways: through the menu and using the button on the case (Reset). In the first case, you must select the tab and activate the reset process, in the second - to hold the key for a few seconds and wait for the device to restart.

Using the TL-WR741ND router, you can organize a high-quality connection that allows all the instruments connected to it, use the high-speed cable and DSL Internet. The development of TP-LINK enjoys great demand in the market. The router includes a NAT router, switch and Wi-Fi-point.

Few of users used all the possibilities of the router

The parameters of this instrument allow you to exchange any files via the network, view HD video, use data storage and printers, and play games. How to set up a TP-LINK TL-WR741ND router correctly? Let's figure out more!

  • support L2TP, PPPOE, PPTP;
  • four ports LAN;
  • one antenna 5 dB;
  • the ability to create a VPN tunnel;
  • iPTV support;
  • wPA / WPA2, WEP protection. WPA-PSK;
  • 2.4 GHz;
  • 150 Mbps.

Note that TP-Link TL-WR741ND has a removable antenna, which allows it to be installed in a different position, enhancing the signal.

Appearance

The router is released in the white body, while the indicator panel is painted into the black. Based on the settings, five different light bulbs may light on the device:

  • SYS - System Settings Indicator. With normal operation of the device, this light flashes. Immediately after switching on, SYS is on the time, during this period, the router configuration is applied. For system error The lamp does not burn.
  • PWR - meals. Responsible for the connection of the product with a power grid. To catch up with this indicator, it is important not only to turn on the power supply, but also press the key on the back of the router.
  • WLAN - when blinking notifies user about proper work Wi-Fi. If such an option on the TP-LINK TL-WR741ND is turned off, the indicator will not flash or burn. If it burns, then, obviously, the device should be restarted (this happens with a system error).
  • WAN, LAN - light bulbs light up if the port includes a wire from a PC or a provider cable. If the firm wire is connected, but the light bulb does not burn, it can talk about problems from the company. Also, the indicator sweeps with a damaged wire.

Connection

The router must be first connected to the PC, for this, the supplied patch cord is activated. Next, the provider's wire is enjoyed in the WAN connector. Having done these two simple steps, insert the BP into the outlet.

On the back there is a power key, it must be pressed to start setting up. Also from this part of the product you will find the RESET button.

Setting

Any instructions for TP-LINK TL-WR741ND are performed through the interface. You need to make any changes in the parameters of this router only at cable connections. We do not recommend changing something after connecting to Wi-Fi.

Note that the device after the first switching must be connected to the PC in AUTO mode. If this did not happen, then make sure that the installed configurations for the network card are correct (they must be automatically issued).

Now enter 192.168.0.1 in the browser, and enter the standard parameters for these devices in the authorization window (new routers use Admin / Admin data). To go to the instrument settings with other authorization settings, clamp the RESET key for a couple of seconds. This will give the opportunity to reset any changes to the configuration of the product and return to the initial parameters.

Configure Internet

The network is installed in the WAN section of the Network section. TP-LINK TL-WR741ND is able to work with any provider, the main thing is to configure it correctly.

Ringerie setting

This type is considered the most popular. It uses such well-known providers as Rostelecom, ID-Net, Dom.ru and Megaline. So, enter the following parameters in WAN:

  • connection type - RPRY;
  • login / Pass - Enter the data issued by the Provider Firm;
  • Wan Connection Mode - Connect automatically;
  • disconnect Secondary Connection.

Other fields are not needed. If the information is entered correctly, the Internet will appear almost immediately.

Setting up RRTR

Ufanet and Aist Togliatti use precisely this type of connection. The main difference from the rest of the connection options is the use of vPN Server. To configure a PC to work with these providers, enter such data:

  • connection type - PRTR;
  • address and server name - enter the information issued in the contract;
  • IP - set the flag opposite the address type (Dynamic or static, is indicated by the provider);
  • fill in the Login / Pass fields as it is written in the contract.
  • mTU size - 1420.

If it is necessary that the Internet always connects automatically, set the Wan Conection Mode parameter to the "Connect automatically" position.

Setting L2TP

Here everything happens according to the instruction similar to RTTR, the only difference is the connection type (we recommend specifying on L2TP).

Wi-Fi Setup

On TP-LINK TL-WR741ND you can quickly configure Wi-Fi. To do this, go to the first Wireless section item and enter the network name (SSID). There are also such fields here:

  • channel - Auto;
  • channel width - auto;
  • type - 11BGN Mixed;
  • region - Russia.

Do not forget to set flags opposite the "Enable Sssd Broadcast" and "Enable Router Radio" items.

Then go to "Wireless Security" and use such instructions:

  1. Type - WPA2-PSK.
  2. Encryption - AUTO.
  3. PSK Password - Come up keyword For the network.
  4. Update period - 0.
  5. Save the changes.

Firmware

Many users do not know what firmware is performed. The firmware update is useful in that router manufacturers regularly find and correct small (and sometimes very serious) shortcomings in the system. This allows you to improve productivity, efficiency and reliability of equipment. In addition, the need to perform the firmware occurs when the product is incorrect: the network is there, but there is no Internet, the connection is suddenly breaking, information is slowly transmitted, etc.

Therefore, the software update for TP-LINK TL-WR741ND is considered an important and obligatory task. To accomplish such a procedure, it is important to download high-quality firmware first. You will find it on the developer's website. Specialists do not recommend using third-party files, It hurt the device.

It is also important to know the exact version of the equipment (this information is on the sticker located on the rear side of the device).

Having understood with the exact name of the model, go to the TP-LINK website and enter the router data on the search bar. After that, go to "Downloads", where all files are saved for this device. Usually, at the top of the list are the newest firmware files. Each block with firmware contains information about the program, supported by OS, output date and other useful parameters.

Download the file to your PC, unzip it into a comfortable place. Next, the procedure looks like this:

  • log in between the interface;
  • select "Update the built-in software";
  • push the path to the file with the extension * .bin downloaded earlier;
  • click on the "Update" key.

The procedure takes a few minutes, after which the router will perform an automatic reboot. You can not turn off the PC or router during the update, such cases often lead to equipment breakdown.

It is important to emphasize that the "newest" program does not always mean the "highest quality". Sometimes the fresh update is not available enough, as a result of which the equipment loses part of the functional or it works incorrectly. Therefore, the optimal solution will be the use of a popular and stable version of the firmware.

Before you begin to configure the router, check the connection settings on the local network. For this:

Windows 7.

Click on " Start", "Control Panel".

Then click on " View network status and tasks".



LAN connectionProperty".


Then choose from the list " Internet Protocol version 4 (TCP / IPv4)"And click" Property".

"And", then press the button " OK.".

Windows 10.

Click on " Start", "Parameters".

Then click on " Network and Internet".



In the window that opens, we see " Ethernet"Click on it right-click Mouse, choose " Property".


Then choose from the list " IP version 4 (TCP / IPv4)"And click" Property".

In the window that opens, you need to set ticks " Get an IP address automatically"And" Get the DNS server address automatically", then press the button" OK.".


Connecting a TP-LINK TL-WR741ND router to a computer

The next step will be the connection of the router TP-LINK TL-WR741ND to your laptop or Personal computer (PC). To do this, you need to connect the cable that you conducted a provider to the blue port of the router (that is, it is the cable that goes into your apartment, a house, office, etc. from outside), and a cable that walked with Router, one end to one of four ports, which are marked with yellow on the router, and connect the other end to your laptop or PC. And yes, do not forget to connect the power cord.


Authorization of the TP-LINK TL-WR741ND router

So, they connected the router, now you need through any browser (be it Google Chrome., Mozilla Firefox., Internet Explorer., etc.) get into his web interface. For this, open the browser and in the address bar, drive the address of the router: 192.168.0.1 and press the button " ENTER"On your keyboard (in older models of this router, this address may be: 192.168.1.1 ).

  • Username - admin.
  • Password - admin.

So, drive the data and click " Login."



Setting up the TP-LINK TL-WR741ND router

And finally we hit the router web interface and now you need to make equipment settings. The first thing to secure a wireless network by setting a wi-fi password. Then you will need to find out what type of connection is used to log in, it is PPTP, L2TP or PPPoE. You can find you by calling your provider (this is the organization with whom you have entered into an agreement to provide Internet services). So, let's start the router setting.

Wi-Fi password setup

I bring to your attention a video instruction for setting up a password on Wi-Fi on a router TP-LINK TL-WR741ND

Let's also write in writing and illustratively. Consider the password setting on Wi-Fi on the router TP-LINK TL-WR741ND.
Select on the Web interface in the tab menu " Wireless."And get into" Wireless settings"- Setting up a wireless network. Here it is necessary in the column" Wireless Network Name:"Come up and specify the name of your wireless network, this name will last light when you connect to the network. Then choose" Region" - Russia.. After that click " Save.".


Next, go to the menu in the tab " Wireless Security"Here we will customize the password for a wireless network invented above, for this select the type of encryption" WPA-PSK / WPA2-PSK", and then below in the field" PSK Password:"We come up and drive a password. After press" Save.".


After we pressed " Save."This button will appear an inscription indicating that the settings are saved and now we need to restart the router. What we do by clicking on the button" click Here"By sending a router to reboot. After rebooting your wireless network name will appear in your computer network settings.

Setting up PPTP.

PPTP. on router TP-LINK TL-WR741ND On the example of the TP-LINK TL-WR1043ND router.

Let's also writing and illustratively. PPTP.on router TP-LINK TL-WR741ND.
Network", then" Wan.".
IN " Wan Connection Type:"Choose" PPTP / RUSSIA PPTPUser Name:"), Password (in line" Password:CONFIRM PASSWORD:Server IP Address / Name:
Connect Automatically. NOT Connect on Demand.
Save.".


Setting up PPTP with static IP address

Consider the connection setting PPTP with static IP address on router TP-LINK TL-WR741ND.
So go to the menu to the tab " Network", then" Wan.".
IN " Wan Connection Type:"Choose" PPTP / RUSSIA PPTP", You will be given below to specify the username (in line" User Name:"), Password (in line" Password:") and confirmation of the password (in the line" CONFIRM PASSWORD:").
Static IP.Server IP Address / Name:"), IP address (in string" IP Address:"), subnet mask (in line" Subnet Mask:"), the main gateway (in the string" Gateway:") And DNS (in line" DNS:"). All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call hot line Your provider and find out how to get them.
After you have made all the necessary data put a tick on the contrary " Connect Automatically." (This setting will keep an internet connection constantly, so if you have NOT unlimited tariff I recommend putting a tick on the contrary " Connect on Demand."What does the connection connection mean, that is, the Internet is connected only when you start using it).
After all manipulations with the settings, press the button " Save.".


Setting L2TP

Consider the connection setting L2TP. on router TP-LINK TL-WR741ND.
So go to the menu to the tab " Network", then" Wan.".
IN " Wan Connection Type:"Choose" L2T / RUSSIA L2T", You will be given below to specify the username (in line" User Name:"), Password (in line" Password:") and confirmation of the password (in the line" CONFIRM PASSWORD:"). You will also need to specify the IP address of the server (in the string" Server IP Address / Name:"). All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
After you have made all the necessary data put a tick on the contrary " Connect Automatically."(This setting will keep an internet connection constantly, so if you have NOT Unlimited tariff I recommend putting a tick on the contrary " Connect on Demand."What does the connection connection mean, that is, the Internet is connected only when you start using it).
After all manipulations with the settings, press the button " Save.".


Setting L2TP with static IP address

Consider the connection setting L2TP with a static IP address on router TP-LINK TL-WR741ND.
Typically, the static IP address is provided. legal entitiesor as an additional service to the main tariff individuals.
So go to the menu to the tab " Network", then" Wan.".
IN " Wan Connection Type:"Choose" L2TP / RUSSIA L2TP", You will be given below to specify the username (in line" User Name:"), Password (in line" Password:") and confirmation of the password (in the line" CONFIRM PASSWORD:").
Since the connection uses a static IP address, you put a tick on the contrary " Static IP."Next specify the IP address of the server (in the string" Server IP Address / Name:"), IP address (in string" IP Address:"), subnet mask (in line" Subnet Mask:"), the main gateway (in the string" Gateway:") And DNS (in line" DNS:"). All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
After you have made all the necessary data put a tick on the contrary " Connect Automatically."(This setting will keep an internet connection constantly, so if you have NOT Unlimited tariff I recommend putting a tick on the contrary " Connect on Demand."What does the connection connection mean, that is, the Internet is connected only when you start using it).
After all manipulations with the settings, press the button " Save.".


PPPOE Setup

I bring to your attention a video instruction for configuring the connection type PPPoe on router TP-LINK TL-WR741ND On the example of the TP-LINK TL-WR1043ND router.

PPPoe on router TP-LINK TL-WR741ND.
So go to the menu to the tab " Network", then" Wan.".
IN " Wan Connection Type:"Choose" PPPOE / RUSSIA PPPOE", You will be given below to specify the username (in line" User Name:"), Password (in line" Password:") and confirmation of the password (in the line" CONFIRM PASSWORD:"). All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
After you have made all the necessary data put the ticks opposite " Dynamic IP."And" Connect Automatically."(This setting will keep an internet connection constantly, so if you have NOT Unlimited tariff I recommend putting a tick on the contrary " Connect on Demand.Time Based Connecting
After all manipulations with the settings, press the button " Save.".


PPPOE setup with static IP address

Consider the connection setting PPPoe with static IP address on router TP-LINK TL-WR741ND.
Usually the static IP address is provided to legal entities or as an additional service to the main tariff to individuals.
So go to the menu to the tab " Network", then" Wan.".
IN " Wan Connection Type:"Choose" PPPOE / RUSSIA PPPOE", You will be given below to specify the username (in line" User Name:"), Password (in line" Password:") and confirmation of the password (in the line" CONFIRM PASSWORD:"). Since the connection uses a static IP address, you put a tick on the contrary" Static IP.", then specify the IP address (in line" IP Address:"), subnet mask (in line" Subnet Mask:").
All of the above data provides you with a provider (an organization that has spent your Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call the hotline of your provider and find out how to get them.
After you have made all the necessary data put a tick on the contrary " Connect Automatically."(This setting will keep an internet connection constantly, so if you have NOT Unlimited tariff I recommend putting a tick on the contrary " Connect on Demand."What does the connection connection mean, that is, the Internet is connected only when you start using them, or" Time Based Connecting"What does the time connecting, that is, the Internet works in a specific time you specified).
After all manipulations with the settings, press the button " Save.".


Password change web interface

I bring to your attention a video instruction on changing the password on the router web interface TP-LINK TL-WR741ND On the example of the TP-LINK TL-WR1043ND router.

Reset Web Interface Password

In case you put a password on the router web interface and forgot it, I bring to your attention to watch the video instruction on resetting the web interface password on the router TP-LINK TL-WR741ND On the example of the TP-LINK TL-WR1043ND router.

Update firmware

I bring to your attention a video instruction on updating the firmware on the router TP-LINK TL-WR741ND On the example of the TP-LINK TL-WR1043ND router.

Connecting a computer to Wi-Fi

After connecting and configuring the router, you must connect the computer to the wireless network (Wi-Fi), consider connecting to Wi-Fi in two operating systems, it is Windows 7 and Windows 10:

Windows 7.

Video instruction

Sultan.

Connect automatically" and press
"Connection".

Windows 10.

Video instruction

In the lower right corner of the desktop we find the wireless network icon (Wi-Fi), click on it with the left mouse button.

Pops window with a list of available wireless networks. Choose a wireless network, in my case it is a network " Sultanova."(You choose the network whose name was given when).

After selecting the network, check the box in front of " Connect automatically" and press " Connect".

We are waiting for, perhaps a couple of seconds and you connected to your wireless network.