7 Password recovery. How to easily reset the forgotten password in any version of Windows. After performing this operation it is necessary

Hello, dear blog readers in this article will be described in detail about how to reset the administrator password in operating system Windows 7.or create a new account, without any utilities specifically designed for this. This method is very effective when you for some reason lost or forgot your password from account, and this account is the only one.

In fact, the administrator password reset in the operating room windows system 7 Not such a complicated procedure, if you know all the subtleties.

So, let's start from the first stage. For this we will need run the command line in front of the login screen to the Windows account. But first things first.

Action No. 1. : You need to download a disk with the Windows 7 distribution. If for some reason you do not have this disk - it is not trouble, you can run the entire procedure from the recovery disk. This situation is possible that you will not have the first or second. But there is again the output, you need a LiveCD with Windows PE, or if you have another operating systemWindows on another local disk Winchester.

Action number 2: The window has surfaced, the so-called language parameter selection window, You need to press the "Next" button, then press the "Restore System" button, again click "Next", then, as shown in the picture below, click the "Restore System" button.

Fig 1. System Recovery Settings

Action number 3: We prescribe the command in the command prompt regedit.and press ENTER. You will open the registry editor window.

Action No. 4: In the registry editor window, click on the section HKEY_LOCAL_MACHINE (See Figure). After that, from the "File" menu, you need to select "Load a bush".

Figure 2. Registry Editor

Action number 5: You need to go to that disk exactly where Windows 7 is installed. By the way, if you do not see the usual letter C, do not despair, such a fairly often happens, most likely the letter has changed during this procedure. You need to open the file to the address:

FROM (or other name of the hard disk partition) : Windowsystem32configsystem.
All this we see in the picture below:

Figure 3. Download bush

It happens that in many cases, the disc with the operating system is not visible if you have such a situation, then you need to download the driver in action number 2, it is to solve this problem.

Action number 7: You need to go to the section.

HKEY_LOCAL_MACHINE888SETUP.

After that, you need to click on the following parameters:

- CmdlineYou must enter cmd.exe and click on OK, as shown in the picture below.

- SETUPTYPEYou need to replace the figure 0 to 2, also click on OK, as shown in the picture below:

Figure 5. Registry Editor.

Action number 8: You need to highlight the section 888 in HKEY_LOCAL_MACHINEAfter that, from the "File" menu, click on the "Unload bush" item.

Action number 9: You must remove the installation disk, close the address bar and the registry, click the Restart button in the Recovery Settings window.

So we reached stage number 2, we denote it as " Reset account password or creating a new user, enter account”.

After pressing the computer's restart button, you must wait, when the login window appears in the Windows 7 operating system. Immediately before logging in, the command line window will automatically pop up.

Here is the actual account password.

To reset the password, you need to enter the following command, after entering the Enter.

nET User user name New_pall.

If there are gaps in the password invented by you, you must enter them in "quotes".

In the picture below, we see as the ADM7 user, sets the TL942G8DWP password.

Figure 6. Command line.

If you suddenly, for some reason, forgot your new account, write net. command User. All previously created accounts will appear before you.

Passwords installed by users for logging into the system can be a real headache, since we are all people, and some things we tend to forget. For example, what to do, if the user has forgotten windows password 7 (meaning input to the system), but before nowhere, did you save the desired combination or did not record?

It is clear that Windows will constantly issue messages that user data for logging into the system is incorrect. How to restore the ability to enter? For this there are several methods, some of which ordered user may seem quite complicated. There will have to be patient because in such a situation simple solutions Not provided.

What if you forgot the Windows 7 password: recovery and reset options

As it is already clear, just to restore or reset the password, for knowing Azov, it will not work. Of course, if a system administrator installed the password for a registered user on the working terminal, you can find out a combination for entry. As a rule, administrators store passwords of all users in a safe place, since roughly speaking, it enters their responsibilities.

But what to do if the user has forgotten the password on a computer with Windows 7 or any other system, being Admina himself? Here it starts the greatest difficulties. Since situations associated with the inability to log in may be completely different, then consider the following techniques:

• reset primary passwords in BIOS;
• changing a forgotten password when starting the system in safe mode;
• creating a diskette of forgotten passwords;
• password reset via the command line or registry when loading from removable media;
• using third-party programs.

Password reset BIOS.

So, suppose that the user has forgotten the password on a computer with Windows 7, which was not initially installed for logging into the system, and to make the load at all or to access the BIOS input / output / output parameters. To start the download usually uses password hDD type Password or Boot Password. Passwords like Supervisor Password and User Password control only access to the BIOS and the operating system boot does not affect.

In order not to engage in the selection of the desired combination, the inpatient computer terminals are easiest to withdraw from motherboard CMOS Battery for 10-15 minutes, then paste it back and enable the computer. No power on the chip will allow passwords to reset, and completely reset bIOS settings, bringing them in factory condition.

Using a secure mode when registering multiple users

But it was only the easiest option. But maybe such that windows user 7 Forgot your password in a situation where it is one of the registered system users, but not an administrator. In this case, it is logical to assume that he either knows the entry password on behalf of the administrator, or can learn it from the admin, or (which is completely unlikely) the entry under the administrative registration is carried out without using the password. However, you can do it much easier: when loading the system, call the start menu by pressing the F8 key and select the start from it in safe mode.

During the login process, you will need to select the administrator, and then enter the account management section in the control panel. Here to use the management of another registration, select your own and install a new combination, which is later and will be used to log in.

Note: this method not applied in case of use for entry microsoft records, or when the user is the only registered user (administrator).

Forgotten password discretion diskettes

Now let's see what can be done if the user has forgotten the Windows 7 password, and the administrator does not know it either or does not remember, but can receive access to the system. In this case, the administrator can refer to the accounts section and use the creation of a diskette of forgotten passwords in the menu on the left.

After selecting the section to save, the "Master of Forgotten Passwords" will start, after which it will be necessary to simply follow its instructions. Upon completion of the formation of a PSW file with information to reset the code word, it will need to be copied to any removable carrier, for example, on the usual USB flash drive. When the system is loaded to the password insertion window, insert the drive to the appropriate USB port and click the password reset link below the field of its input. Next, the proposal to create a new password and the field of confirmation is displayed. If necessary, you can add a prompt.

What to do if you forgot password preparatory stage

Finally, a few words about the most unpleasant situation. An administrator-level access password without the use of specialized programs can be reset in two ways, but only when loading from removable media with an installation distribution or from a recovery disk like LiveCD.

For situations where the user has forgotten password windows administrator 7, Consider the download with installation disk or flash drives.

First, as usual, a window appears with a choice of regional standards that can be skipped. At the next stage, you need to go to the system recovery item. After that, call the command line through the corresponding item of the rollback menu or using a quick combination of SHIFT + F10.

Primary actions on the command line

Now with the help of the console, you need to determine the system (bootable) disc logger to be used for further action. For this, the command is prescribed: BCDEDIT | Find "OsDevice". After that, the answer will be issued in the form of a string: partition \u003d d (although another letter can be indicated).

The next step is to copy two objects using the commands shown in the image above. The second object is replaced standard remedy Sharp the command line keys (it will be needed for action at the next stage).

Password change when rebooting the system

Now the most responsible stage comes. The system is completely overloaded in normal mode (with removable removable carrier).

When the password input requirements window appears, you need to press the SHIFT key quickly five times. This action causes command Console. Finally, you need to enter the Net User Name Password string, where the username is entered instead of Name (account name), and instead of Password fits new password.

Upon completion of the password change, it should be downloaded again from removable media and on the command prompt to return the ships of the keys, which can be checked at the usual start, repeating five times press the Shift key, resulting in a request to enable this function.

Password reset through the system registry

Now let's see what to do if you forgot the Windows 7 password, but already in relation to system registry. First, as in the past case, starts with boot mediaAfter which the registry editor (Regedit) is called from the command line.

HKLM branch stands out here and the bush load command is used through the file menu.

Then you will need to specify the location of the SYSTEM file (usually this is the Config folder in the System32 directory). After that, an arbitrary name of the created branch is entered, the transition to it is carried out and the SetupType parameter is set to "2", and for the key cmdline - "cmd.exe" (both values \u200b\u200bare entered without quotes).

Next, the editor window is closed, the command of its call is again entered on the command line, the HKLM branch is released and the bush unloading point is applied to the name. After that, all windows are closed, the removable media is retrieved and rebooted in normal mode.

When restarting will appear command lineIn which, as in the last example, you should enter the password update command described above with similar data named and the new cipher.

Note: For both options, if the name of the account consists of two or more words, it is entered in quotes.

Third-party programs

Finally, another situation when the user has forgotten the password. Log in Windows is impossible, and what to do, he does not know. In this case, you can use the OphCrack utility. Based on it can be created blood flash drive, boot in the console mode (and not graphically), run the utility and look at the scan results.

The Results field will contain all automatically specific passwords for registered records. If the user has forgotten Windows 7 password, for example for network entranceIt can be completely elementary to remove it so that the requirement of its input does not cause harness in the future.

The presence of administrator rights is the most important tool that is in the hands of each owner of the Microsoft operating system. It allows you to restrict access to other people who use the same computer for their own purposes, make individual changes in the settings and so on. But what if you forgot the password on Windows 7? Continue to work in limited mode? Initiate a procedure for reinstalling the OS? Quite optional - fortunately, forgot password You can restore in Windows 7.

Solving the problem without reinstalling the operating system

The developers of this OS have provided a few possibilities that allow you to restore the password of the admin account, which will not require a junzer to start the seven reinstalling process.

There are two ways to unlock Windows 7:

• The first implies that the user has access to the OS itself, although it is possible to do without entering it;
• The second can be useful to those people who have been deprived of this opportunity. For example, to start Windows 7 it was necessary to enter personal data of the user.

Naturally, it is necessary to consider each of them in more detail.

The first method - the use of special utilities

So, forgotten the password of the Windows 7 administrator - what to do. Initially, you will need to download one of the images of the desired utility:

• Disk option;
• Option for flash drive.

Naturally, they will have to write them on the selected type of media. It is easy enough to do so, having one of the specialized programs, for example, Nero or its analogue.

Further user actions look in the following way:

1. A restart of the PC is performed with the subsequent entrance to the BIOS.
2. The priority of loading is changing to the option that implies the priority use of an external source with the utility necessary for the procedure.
3. The procedure for launching a computer utility is initiated.

After starting the program, you need to do the following from the user if he wants to restore the administrator account password:

Specify the path K. system folder Operating system:

1. C: \\ Windows \\ System32 \\ Config.
2. Enter the name of the administrator to which access is required.
3. Press "input", then successively "!" and "y".

As a result, the system resets the password. From person you only need to restart the OS in normal mode, go to system settings And specify new personal data.

Second way

If you forgot the password and there is no possibility of a full entrance to OS, then to solve the problem, a person will need to have boot disk with an operator. If there is no such tool at hand, you will have to go to familiar to create the necessary drive with the record on their work hardware.

1. Run the computer download from the installation disk (again - the starting priority is changed to the BIOS).
2. After completing some automatic processes, a window will appear with a language selection. Press "Next".
3. In the next select "System Restore".
4. Again "Next", after which the list you need to run the string to enter commands.
5. Alternately enter two commands: Copy C: \\ Windows \\ System32 \\ SETHC.exe C: \\ and Copy C: \\ Windows \\ System32 \\ Cmd.exe C: \\ Windows \\ System32 \\ Sethc.exe.
6. After that, it will be necessary to confirm the starting operation three times ("Enter", "Y" and again to "input").

The next step is to initiate a reboot system. As a result, a branded window appears, where the user is offered to further enter their data. You must click on the "Shift" button five times. An once again command line will appear, where you can specify the administrator name and the new password option. Reboot once again, but the boot disk is used again, with which you need to repeat all operations to the third launch of the string command.

From the user, it remains only to drive the COPY C: \\ SETHC.exe C: \\ Windows \\ System32 \\ Sethc.exe and click on confirmation three times.

The problem is solved - you can restart the PC in normal mode and use new data to start.

We have the opportunity password bypass in Windows 7 without reset, If you forget it? Of course have! Now we will tell you how to find out the account password or Windows 7/8/10 password.

Method 1. Bypassing Windows 7 password in safe mode

You can change the password in Windows in safe mode by the following steps:

Step 1. Press F8 before the Windows boot screen.

Step 2. Select Safe windows mode - "Safe Mode with Command Line" → Click "Enter" Next.

Step 3. Enter Net User and press ENTER, all accounts for Windows PC will be displayed.

Step 4. Enter your locked user account with a new password on the command prompt, for example, "Happy 123456" means your new password for the user's happy user.

Step 5. After rebooting the computer, you can automatically log on to your computer with a new password.
(Note. When you restore Windows password from safe modeThe administrator account with a famous password is required. If not, go to the method 2)

Method for 2. Password bypass in Windows 7 using a password reset disk

If in the past you created a password disk for windows restorationThe following are steps to hack a forgotten password in Windows:

1. If you enter an incorrect password when you try to log in, Windows will display a message about incorrect password. Click "OK" to close the message.

2. Click "Reset Password", and then insert the password discharge disk.

3. Perform steps in the password reset wizard to create a new password.

4. Log in with a new password. If you forgot your password again, you can use the same password discharge disk. You do not need to create a new one.

(Note. The disc works only in a specific account if you changed the password for Windows XP for this account, it still works. But if you do not have a disk to reset the password, then the only way to bypass your Windows 7 password uses a third-party application. )

Method 3. Hacking a password of Windows 7 without a disk and flash drive

Windows Password. Key - The third party utility, proceeds to the assistant when your computer is completely blocked without the created password discharge disk. Someone can offer you to reinstall the system, noeto does not need. Windows Password Key Professional can help you override the password for Windows and successfully log in to the computer again, without risking the loss of data. Follow the three steps to pass the password for Windows; You will soon enjoy your PC.

Step 1. Enter any other available computer (not blocked), download and installWindows Password Key.

Step 2. Copier CD / DVDiUSB using this program.

Step 3. Insert the disk on the locked computer and follow the instructions of the wizard softwareTo bypass forgotten Windows password with a recorded CD / DVD or USB drive.

Video Tutorial on how to bypass the administrator password in Windows 7 through WindowsPasswordKey

Whenever you were if you forgot your password for Windows, do not forget to use the Windows password key, and then you can easily and quickly unlock forgotten password Windows in minutes!

All passwords, especially complex, are often forgotten by us. Sometimes it happens that their meaning we are written only on a piece of paper, which soon is simply lost. In general, the situation is typical. Newbies sometimes scares the fact that when a password is forgotten, it is impossible to enter the system. They do not know what to do in such cases. Formally, without a password (if it is installed and enabled), it is impossible to enter the system, but this situation can still be corrected. How to do it, learn from our article. So how to remove the password with Windows 7?

About SAM system

At the seventh version of the Windows operating system, however, as on XP, the SAM system is used to store keys and user names. All information that is in it is reliably protected from hacking. Therefore, in order to find out the forgotten password, you will have to spend a lot of time and effort. However, there are ways of hacking easier. And their main essence is to reset the password and replacing its values \u200b\u200bto new ones. That is, you will not be able to solve old information to the user "Admin" or "Guest", but it will be possible to enter the computer after the first reset. To do this, you will have to use several programs that we will tell you a little later.

It is also worth noting that when the OS is running, you will not be able to "fit" into the password store and change any information there. That is why the programs for reset keys must be downloaded from another computer to a separate DVD / CD or on the USB flash drive.

And now about utilities

The most famous program designed to reset passwords in computers with WINDOVS OS is offline NT Registry and Password Editor. This utility is capable of working with almost all operating systems. This is XP, and "Vista", and Windows 7.

How to use it?

Before you remove the Windows 7 password, you need to have access to another computer, on which the protective keys are not used or their values \u200b\u200bare known. Laptop is or stationary system unit - never mind. The main thing is that he will have access to the Internet. So come in world Wide Web And enter the key in the search engine (for example, download NT Registry and Password Editor). Swing the program and save the EX-installer on the USB flash drive or disk. After you recorded the image on the disk, you can proceed to reset the password. Unfortunately, this program has no graphic interfaceHowever, it is not very difficult to understand the principle of its work.

We insert the flash drive or disk into the "pasted" computer and wait until it is highlighted sometimes to enable this program, you need to press the F6 button to one of the moments when the OS starts (similar to the installation of the new operating system on the computer). But in general this utility It is started, and all that is required of you is to press the Enter key.

What to do with the command line?

Load from removable media of the program and select the section number on which your "Operation" is installed. If an error occurs, you will have to run the computer again. Next, the program will ask you to specify the path to the folder where the key storage file is located (that is, in the SAM system). This line should appear here: X: / Windows / System32 / Config . This is the path to the password file. If the row is not fully completed, add it to the corresponding characters. Now select the Password RESET call (it is in the first list).

Then everything will be simple. After Password Reset, select Edit User Data and Password. He is also in the first list. Now it is necessary to enter or its identifier in 0xABCD format. The last 4 digits are the RID indicated in the first column. It is useful to us if the username of the user (user) is displayed incorrectly or it will not be able to correctly enter.

Now click on the item 1 - Password reset. You can also change it. To do this, select Section 2 "Password Change". Then click simultaneously sign "!" and input key. So you exit edit mode.

To remove the password Next, enter the "Q" symbol, press Enter, then "U" and the input key. All - the password is almost reset. To complete the work, enter "N" and remove the flash drive or disk disc. Next, make a combination Alt + Ctrl + Del - this command you reboot your computer. All - password account windows records 7 Successfully reset! By time for all this work you will have no more than 1 hour along with the download and installation of the program.

Are there any risks?

There are no risks when resetting the password, even if you apply this method for the first time. Files, folders and data after that will not disappear, as when uninstallation of the operating system from the disk S. After resetting the password, you will display the same familiar desktop with all saved shortcuts. That is, affecting the subsoil system (the SAM key file), even intuitive actions you do not harm your computer. Everything is very simple and safe.

How to remove a password with Windows 7? Method number 2.

We give another option to reset the password on the Windows 7 operating system. To do this, you will have to prepare the installation disk with "Windows" in advance. In this case, you will enable the Hidden Administrator Account by editing the registry with installation environment OS. In the future, you can log in to the system under this account and edit at any time information about passwords of any account, which is registered on this computer. This will save a lot of time. By default, "admin" does not have a registered password, which only plays a hand.

What do we need for this?

All that you want from you have is the original installation disk with the operating system. It is from it that we will be loaded and restored / reset the protection in the SAM system.

So how to remove the password with Windows 7? To do this, we need to boot from the installation disk and click the SHIFT + F10 key combination. So we will call the command line. Here you need to enter the "regedit" value and press the input key.

After you start you need to go to the HKEY_LOCAL_MACHINE section. To do this, select "File" - "Load a bush ... .." On the English version of the setting disk it will look like this: File - Load Hive ... Now open the SAM file. It is in the folder at / windows / System32 / Config (that is, where the operating system is installed). When opening the SAM system, the computer will propose to enter the value of the loaded bush. Here you can dial any combination of characters and keys.

After that, select a section that is located at key_local_machine / bush name / SAM / DOMAINS / Account Users / 000001F4. At the same time double click right-click Mouses by key F. The editor will appear on the screen in which you will need to go to the number of the line 038 (this is the number 11). This value must be changed by 10. No longer change data. Other numbers can not be added or deleted. To turn off the password in Windows 7 in the Windows 7 system, select the "HKEY_LOCAL_MACHINE / Name busist" bush. Then in the menu, select "File" - "Unload bush". On the english versions Windows needs to select File - Unload Hive. Now confirm the unloading of the bush and restart the computer. Previously, you need to pull the installation disk from it.

But that's not all. To reset Windows 7 password, do a few more actions:

1. Go to the ADMIN account.
2. In the control panel, select "Manage Users". Here you can delete Windows 7 password.
3. Change the forgotten password for a new one or drop it.

It is worth noting that here you can change the key not only on the administrator account, but also on other accounts.

As a method number 3

This is perhaps the most difficult method of resetting key data from the SAM file. And all the difficulty and danger lies in the fact that here we will deal with the submenu of system files.

As you know, in each "Windows", the default function is sooner or later everything is confronted - if you press the SHIFT button five to eight on the keyboard, it will sound short, but very nasty sound, and a small window will appear on the screen .

This window belongs to the sethc.exe auxiliary program. The latter underlies the system directory of the OS. It also launches on the welcome screen, namely when you are invited to select a user account and enter a password. You can replace this useless program to something more interesting, for example, on cmd.exe (command line). Naturally, it will not appear every time you start, but only if you are loaded from the installation disk and click the SHIFT + F10 key combination.

How does it work?

Start the password reset is necessary from the definition of the character-letter of the disk on which the OS is installed. To do this, just enter the "DIR command line. C: "and view the contents of the section root.

After copy the original sethc.exe file to the root of the disk folder, and the second replace on cmd.exe.

Then make a reboot of the computer and press the SHIFT key several times (until the command line appears on the screen). Enter the username and the new password as follows: Net User user name New_pall. Visual example: Net User Admin 12345.

Values \u200b\u200bcan be different, however "Net User", which is at the beginning of the line remains unchanged. Also, when entering the password it is impossible to put a space. And the username must strictly correspond to reality. If this is an administrator, then Admin. If the guest, then after Net User is introduced by Cyrillic value "Guest" and so on.

A similar password discharge algorithm can also be observed in the Windows-XP operating system. Therefore, even if you are familiar with the "seven", then knowing the XP, it will be very simple to work with this OS.

How to watch Windows 7 password? To do this, unfortunately, it is impossible. We only have to drop and install a new meaning.

All - now you can safely enter the system. Next, at your discretion, you can reset it or change these values \u200b\u200bagain.

If you judge objectively, then the fastest and simple option Password reset is the first way. However, this does not mean that the remaining two are not effective.

Conclusion

So, we found out how to remove the password with Windows 7. Choose any of the three methods of the above and reset passwords at any time in minutes. Good luck!