Install Windows 7 home extended. Autostart installation of Windows with DVD disk or flash drive
Hello website administrator Remontcompa .ru, I have a question for you - how to install Windows 7 on new computerIs there a clean hard drive without sections? Surely there are some rules and if they do not comply with, you will definitely have problems that I want to avoid. Georgy.
Installing Windows 7.
Hi friends! Installing Windows 7 to your stationary computer or laptop from a disk, as well as from the flash drive, should not be accompanied by any difficulties after reading our article. We prepared for you detailed description Each step and attached many illustrations. Having passed all the steps of the installation with us, next time you install Windows 7 without assistance.
- First, the official distribution kit of Windows 7 64-bit can be downloaded on the official one.
- Secondly, if you have UEFI BIOS. And you want to install Windows 7 on the GPT disk, but do not know how to do it, read our article.
- Thirdly, if you bought a new laptop with Windows 8.1 and want to install Windows 7 instead of it, then all manipulations with the BIOS UEFI and the process of further installation of the system.
- Fourth, with problems in installing Windows 7, refer to our article -.
- Fifth If you do not have a drive, you can use our instructions and.
- Sixth, if you install Windows 7 from the flash drive, then you know, Windows 7 does not support USB 3.0 (ports are usually painted in blue), if your uSB flash drive 3.0, insert it into uSB port 2.0.
So, the last preparations before installing operating system. What needs to be done first?
If you install Windows 7 on a hard disk with existing partitions, you need to copy all your data from the section to install Windows 7. During the installation process, this section will be formatted and information from it will be removed.
If you install Windows 7 on a clean hard drive, you don't need to do anything, just read the article further.
In general, nothing complicated in all this, at the very beginning of the download, press on the keyboard, in most cases it is the F2 or Delete keys, entered the BIOS, here we need a section "boot sequence" or "boo t". Bios is mostly two types, this AMI BIOS window, we will consider it in our article if the window is different to the interface, then you have - Award BIOS, how to work in it, written in our article " BIOS Loading from disk. "
As we see, first boot device The hard disk is set - HDD: PM-MAXTOR STM3, highlight the first point 1st Boot Devise and press ENTER.
IN this menu We will stand with the first boot device (First Boot Device) CD-ROM, select it using the arrow on the keyboard, then ENTER.
So the first drive, and the second it turned out a hard disk, what you need.
Save the settings (click F10) and reboot.
If you correctly set up the boot in the BIOS from the drive and in it you have the installation disk with Windows 7, then next download computer will be released on the monitor offer to boot with installation disk Windows 7 - Press Any Key to Boot from CD or DVD. Click any key on the keyboard, consider if you do not have time to click within a few seconds, the system will go to the reboot and starts everything from the beginning.
The process of installing the operating system begins, waiting patiently
Here you need to choose the language of the system.
Set
We accept the terms of the agreement
Choose a complete installation
In this window, we see the space of my hard disk with a volume of 500 GB ( Disc 0.) Divided into two partitions (Section 1 and Section 2). On the hard drive is the already installed Windows 7 operating system, I don't need it personally and I want to reinstall it. Before installing, I delete all existing sections on the hard drive and create them again. In general, there is a rule if you want to avoid errors when installing Windows 7, it is better to delete all existing partitions before installing and create them to re-or install the operating system directly into unallocated space.
Select left mouse Disc 0 Section 2 and click on the button Delete.
Select left mouseDisc 0 Section 1 and click on the buttonDelete.
Old sections are removed, create new ones.
Select left mouse Unnoticed on disk 0 and click Create.
In this window, you must select the volume of our future disk (C :), Windows 7 will be installed on it. We will choose the size of 200 GB, I think this will be quite enough. Click Apply.
For correct windows work 7 Need to create hidden section Volume of 100 MB with download files.
Therefore, on the offer "To ensure the correct work of all its capabilities, Windows can create additional sections for system files" Click OK.
On the disk 0 we had a hidden section Section 1: Reserved by the system (Volume 100 megabytes) with Win 7 download files.
The second section 2 has also appeared, it will system disk (C :), its volume is 196.1 GB.
An unoccupied place is transformed into a section. We highlight it with the left mouse and click to create, it will be our disk (D :).
Apply
Windows 7 will be installed on the disk 0 Section 2: (Future C :) disk, highlight it with your left mouse and click the Next button.
In this article, I will tell you how to independently install the operating windows system 7 From disk to your computer or laptop.
I offer a detailed I. step-by-step instructions With a visual demonstration of the Windows operating system installation screenshots.
If you think that the installation of the operating system is something complicated and incomprehensible, only a specialist can cope with, then I will disappoint you: it is not true. Now you will see for yourself.
All you need for windows installations 7 (or Windows 8) is a computer or laptop, a disk with the operating system (since in this article we will install Windows from the disk), detailed instructionswhich I will give you now, and perhaps attentiveness! I hope that after installation you will not look like. 🙂
After installation, I recommend immediately install. You understand yourself - in our time electronic payments This is very relevant. Also now (yet) Nowhere without Adobe Flash Player. . Like it rightset read. Perhaps you will also be interested in quite nice . If you store on a computer private Information, create for it.
Important: Most of all possible problemsArriving when installing Windows 7 is associated with an incorrectly prepared installation disc and (or) the quality of the "Assembly OS" recorded on it. How to record the image of the operating system on the disk, you can read in the article.
Remember: If this drive is not out of the box, that is, bought in the store, then you need to use only original images from Microsoft MSDN. It is the original image that is also available on the network, like various builds, is a guarantee of the successful installation of Windows and its normal functioning.
Do not use the assembly of unknown origin. All third-party fixes, corrections, homemade assemblies you put on your own risk. The consequences may be irreversible.
Before installing Windows 7:
Remember the two main points that you need to execute before installing Windows.
First - It is to decide in advance which section hard disk A system will be installed. As a rule, in most cases it is a C: \\ disc. To remember (or create) the volume label and its size.
Remember, your desktop is entirely on a C: \\ disk, or rather, here: C: \\ Documents and Settings \\ Username \\ Desktop. Think in advance about the integrity and safety of archiving files for you, copy them from the desktop, that is, from the disk with, to another disk or flash drive.
All programs installed on the C: \\ disk will also be deleted, but this is not a reason to drag the entire folder with the programs to other disks. It is much easier to re-establish these programs on the clean system. Do not be lazy, not every day you reinstall Windows.
Second The moment is the drivers to your computer or laptop. They need to take care in advance. To most laptops, they come in the kit, but if there are no (or update), we are looking for the manufacturer's official website and download them in advance.
All you need to know about the installation of drivers, I recommend reading in the article "Installing Drivers or Five Iron Rules", which is located.
If you skip this important point, then after installing Windows, you can stay without the Internet, because it is not a fact that Windows distribution will initially contain your drivers network card.
Installing Windows 7 from the disk:
Insert the disk with the Windows operating system into the drive and restart the computer. By the way, if you do not have a drive, you can install the Windows operating system using usual.
We will continue. Our task is to configure the computer download from the DVD. This can be done in 2 ways:
- 1. Select the device (DVD) in a special boot menu;
- 2. Change the boot priority to the BIOS (with HDD to DVD).
The first way, select the device in the boot menu, easier and more convenient. After installing Windows, it disappears the need to return the load from the HDD (hard disk). However, on old computers, this function is missing and in this case you have to go to the BIOS and change the priority of the download.
Start - reboot, waiting when the screen is worshiped and at the first signs of the awakening system (the appearance of the logo), press and hold the Delete key on the keyboard. Why DELETE KEY? These can be keys F1, F2, F3 + F2, F10, Ctrl + Alt + Esc, Ctrl + Alt + S, ESC.
Some universal button to enter the boot menu or to enter the BIOS does not exist, and it all depends on the manufacturer of the computer ( motherboard). The surest way is to read the instructions from the computer or from the motherboard. The table below shows a visual example of such keys.
The boot menu looks like this:
Press F10, agree and confirm the output with saving (Save and Exit) by the choice of "OK".
Phoenix-Award
Consider the second interface version. To load from the disk, you need to change the priorities so that the first device is the DVD drive. Find the item " Advanced Bios. Features and arrows switch to the first device (first boot device), change on CDROM.
Click F10 and confirm the output with saving (Save and EXIT).
If problems arose at this stage, then I recommend to watch this video.
We will continue. If everyone has done correctly, we will see the following window with the inscription: "Press Any Key to Boot from CD or DVD".
Here you need to press any key, for example, space. It is done only 1 time And only at this stage of installation. We see the next window with the inscription "Windows IS Loading Files".
File extraction occurs, after which we will see the inscription "Starting Windows" And the Windows 7 installation window itself. The installation of Windows !!
Select the desired language and click "Set".
Next, we need to choose the editorial board of Windows 7. Choose the one to which you have a key or which is going to activate. On laptops, it usually indicates a piece of paper with a key located on the bottom of the laptop. Entering the serial number will be a little later, it is transferred to the end of the installation.
A few words about installing a 32-bit (x86) or a 64-bit version of Windows. If you have more than 4 GB random access memory (She is RAM, RAM, MEMORY), then we put the 64-bit, if not, then 32-bit (x86).
We will get acquainted and agree with the terms of the license. Next, we need to choose the type of installation - select "Full Installation".
Now you need to choose a section to which Windows will be installed.
If you have this section reserved by the system (note, it is still in megabytes (MB), and not gigabytes), for example, as in the next screenshot, then select the disc 0 section 2.
So that it is not so painfully painful when choosing a section, in advance before installing Windows, look at how many gigabytes takes your disc C.
If you have one partition on your hard disk and it is more than 250 GB, it will correctly create two local disk. One section is specifically for Windows (about 50-100 GB are usually removed), and the other is under the storage of your personal information (how much will remain, XXX GB).
Note: The sections you created must be referred to as disc 0 section 1, 2, 3 ..., and not "unoccupied disk space". Otherwise, the sections with such names the operating system simply will not see.
If necessary, create a section or partitions and click "Apply":
Attention: At this stage, problems may occur - when Windows 7 asks the driver for further installation or when the system does not see your hard disk to continue the installation.
Or install (if prepared) the hard disk controller driver. If you already have two or more partition on your hard disk, then the item above can be skipped. So, we chose the System section, and now we need to run formatting.
The installer warns that all of our data will be deleted. We need it, because we are interested in a clean installation of Windows. We agree and wait. Usually the entire process takes a few seconds. After formatting, we see that the free space has become more, quietly press "Next".
And here is the beginning of the installation, the process is running. You can already exhale).
We are waiting ... It usually takes 15-25 minutes. When our system is installed, it will offer to enter the username and the name of the computer. We enter.
If there is a desire, you can enter a password and a prompt. Next, Windows will suggest to enter serial number. We enter (if any). If not, we skip this step and remove the checkbox "Automatically activate when connected to the Internet".
Installing Windows 7 is not such a complex lesson, as it may seem at first glance. Windows Installer Most of the operations takes on themselves and almost everything in automatic mode. Nevertheless, for the first time, be sure to save all the important files that you have on your computer on the flash drive or other disk.
To install, you need a DVD disk with Microsoft Windows. 7. Include or restart the computer, insert the disk in the DVD-ROM and after displaying the BIOS parameters, you must see the message: "Press Any Key to Boot from CD or DVD ...". Press any key and setting Windows 7.
If a this message It did not appear, it most likely means that you should not download from the DVD-ROM in the first place. Then you should enter the BIOS Basic I / O settings (by pressing the DEL key when the computer is started) and set the DVD-ROM download devices in the first place.
After the installer of Windows 7 will load the initial installation files, the operating system language selection window will appear. Click on "My Language - Russian" and go to the screen detailed settings Language parameters. However, the Russian language is installed here in all fields, so we leave everything as it is and press the "Next" button. On the next screen, click on the Install button, Windows will notify you about the start of installation.
After a short expectation, you will see the Windows 7 license agreement that should be taken. Install the checkbox in the "I accept license terms" and click "Next".
The next step will be the choice of the type of installation of the operating system: update or complete installation. If you already have an installed operating system Windows Vista. And you want to update it to Windows 7, then choose the update option. In this case, all installed programs will remain as it is.
When choosing full installation A new operating system will be installed, which will require you to install drivers for existing devices (video card, sound card, network card, printer, scanner, etc.) and all programs that you need for work and rest on a new one. In this article, "Full Installation" is selected.
A window is displayed with a selection of a hard disk partition to which Windows 7 operating system should be supplied. For each partition, its full size is displayed, free space and type. To install Windows 7, 20 GB of free disk space is minimally required. The type "system" means that in this section already installed, some operating system and install the second, without removal of old, is not recommended. The type "Normal" informs you that there are no operating systems on this section.
In a simple case, you can select the desired section and click on the "Next" button. From experience it should be said that mainly the first partition is selected to install the operating system.
If you do not get tired, how your partition is broken hDD, Or you want to completely clear all the information on it, then in this window it has the ability to remake the partitions of the hard disk by clicking on the inscription "Disc Setup". After that, the following steps are available to you: "Delete", "format", "Create" and "Expand". When formatting, it does not delete the partition, but all data on it will be deleted. The extension allows you to increase the size of one section at the expense of another.
In the video example, located at the end of the article, you can see two sections "Disc 0 section 1" and "Disc 0 section 2". Instead, we create one new one. And if you want to create one section, which occupies all space hard Disk, the operation for its creation is not mandatory, the Windows installer will create it automatically when the installation continues.
Starts copying files and installation windows components 7. The process of process can be traced to display percent of the execution of each stage. During installation, the computer will be rebooted several times and after each reboot, the installation will continue from the place where it stopped before rebooting. Press anything you need, expect.
After each reboot, you will see the message "Press Any Key to Boot From CD or DVD ...". Press any key in these cases should not! (Otherwise the installation will begin again). Need to allow windows Installer Continue its work.
At first launch Windows 7 will ask you to write the username under which you will enter the system, and the name of the computer. The username can be any, but the computer name is recommended to write English letters using no more than eight characters. Perhaps this recommendation is currently no longer relevant, but if in your computer network There are computers where old operating systems are installed (Windows 98, Windows NT, Windows 2000), that such a choice of a name will avoid confusion and ensure the right network work.
On the next screen, you can enter a password to log in in Windows 7 under your username. To do this, you should equally fill in the "Password" and "confirmation" fields. You can fill out the "Tip" field, if you are not sure that you will remember the password well, but it is mainly not used. In addition, it is not necessary to fill in the password. Then Windows 7 will start immediately, not asking anything. After you figure it out with a password, click "Next".
Next page with entering windows key 7 is very important. If you have just purchased Windows, then the license key can be on the disk package, and in the case of re-installing this operating system, the license sticker is likely to be found already on the computer case.
Enter the license key in the following form: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX. The hyphens does not need to enter, they will be installed automatically.
You may not enter the license key now and click the "Next" button. Then Windows 7 will be installed in a limited service life, namely 30 days. The license key can be entered later, in the operating system settings, and remove the limit.
Tick \u200b\u200b"Automatically activate Windows when connecting to the Internet" leave the included. It means that if there is licensed key and connect to the Internet, your copy of Windows. 7 will be registered with Microsoft.
On the page with the choice of parameters windows protection 7 You will be prompted to "use the recommended parameters", "set only important updates" or "postpone the decision".
The second and third options are used in mainly experienced users or system administrators who want to configure Windows work at their discretion. If you plan to install a separate program to protect against hacker attacks, choose the option to "postpone the solution".
On the temporary setup page, set current date, time and time zone. A tick "Automatic transition for summer time and back" can already be removed, since in Russia since 2011 the translation of the clock has been canceled. Click "Next".
The application of the installed system parameters is completed and, after another reboot, Windows 7 will start in operation.
Video lesson installation of Windows 7. All stages of the installation for 6 minutes!
| Like |
In this article, we will look at how to install the Windows 7 operating system from the disk. The instruction was prepared as visualized and affordable even for beginners.
The entire process of installing the "seven" will consist of the following steps:
BIOS setup To download the computer from the boot disk;
Recommendations on the division of a hard disk;
Definition of a system partition;
Installing Windows 7 and initial setting.
Step 1. Setting up the BIOS to load a computer from the boot disk
If you do not know how to upload from the disk, following the link, you will learn how this is done:
Step 2. Starting installation
Coming out of the BIOS after saving the settings made, the computer will be rebooted and if any operating system has already been installed on it, after some time the message "Press Any Key to Boot from CD or DVD" appears on the screen (press any key for Downloads with CD / DVD Disc) What do you need to do?
Be careful, as you will have only five seconds to enter the installation of the system. If the current operating system is loaded, it means that the ability to start the installation was missed and reload the computer to the next attempt.
If you install the system to a new computer or a clean hard drive, then you will not see the previous window installing Windows 7. Start automatically.
So, if the computer started uploaded from the installation disk, a window will appear on the screen to start setting the system in which you can see the process of loading the original files.
If this window does not appear, and the loading of the old operating system began (if it was installed) or there were reports that boot disk Not found (in the case of installation on a new computer or hard disk), then this means that your computer failed to boot from the disk and it is worth returning to the previous step on setting the BIOS.
After downloading the basic files, you must appear the settings of language parameters, date and time format, as well as the keyboard layouts, in which the default parameters for Russia will be installed.
The restoration item may be useful to you in the future, in case of problems with installed system, for example, due to damage, delete or unauthorized changes in its system files. As a rule, this leads to the unstable work of Windows 7 or the failure to load at all. In this case, you can restore the initial system files From the installation disk with the cover of the aforementioned item.
In general, the "Restore System" section in Windows 7, a fairly powerful tool for correcting various kinds of problems arising during its operation, and we will defy the individual publication to him, and within the framework of this article, we click the "Set" button to start directly to Installation.
After a few minutes, you will appear in front of you license Agreement, the condition of which needs to be taken by installing a tick in proper item and pressing the "Next" button.
In the next window you have to make a choice of installation type:
As you can see, here we can choose two options: update and complete installation. If you can use the update item, if you want to update your old operating system on Windows 7, while saving all installed programs and settings. True for this, the installation of "seven" must be launched directly from your already installed OS. It should also be remembered that this is possible only from WindowsVista, and to the operating systems of older generations, including Windows XP, the update is not applicable. In general, this type of installation is not the most successful solution. The fact is that in new Windows It is shown not only the settings of the previous system, but also all its problems, brakes and glitches. And in general, the stable operation of the system and earlier installed programs In this case, not guaranteed. Therefore, the preferred type is the full installation, which should be selected.
At the next stage of installation, we have to choose a partition on the hard disk to install Windows 7. Here, I would like to make a slight digression and bring some useful recommendations on splitting the hard disk to system sections:
Do not assign all the hard disk space for one single section. This may take a lot of trouble in the future.
Modern hard drives There are quite large containers for storing data and therefore it is advisable to split them into several thematic sections.
It is recommended for installing the operating system and the necessary software to divert a separate section and not to score it with your personal data.
Select the size of the system partition should be with a margin, given that for Windows correct operation, 15% of this section should remain free.
Do not create too many sections. This will complicate navigation and reduce the efficiency of the distribution of files and large folders
Step 4. Definition of the system partition
Now, let's go back to the installation. From this point on, the installation of the installation can go in two ways:
Option 1: You have a new computer and a hard drive has never been distributed. In this case, the following window will appear in front of you:
To split the hard disk to partitions, select the item: "Disc Setup". In the above options, select "Create" and enter the required section in the window next to the window. It should be remembered that the size you must point in megabytes. Calculate it based on the fact that 1 gigabyte \u003d 1024 megabytes. As a rule, for Windows7 and related software, it is enough to 60 - 100 GB, but you have the right to do it and more if necessary.
When specifying the desired size of the future system partition, click the Apply button. Next, to use all your capabilities, Windows to create an additional section for it. Do not be scared, it will take only 100 MB of free disk space and will be invisible for you.
By clicking "OK", we will return to the section selection screen for installing Windows.
As you can see, there have been changed here. Now we have a section reserved by the system under own needs, I have just created the section and the remaining unintended area. From an unoccupied disk space, in the same window you can create additional partitions in the same way that we used above, and you can postpone this action for later and finally place your drive already in Windows.
Having received the right solution, we allocate that part of the disk to which we plan to install the operating system and click "Next".
Option 2 - If the operating system is already installed on your computer. Then your hard disk is already distributed to the logical areas, and you will see the window with the listing of all the sections found on it, for example:
Attention! All further manipulations with the found partitions can lead to the loss of your data, so be very accurate in your actions.
If the current partitioning of the hard disk does not suit you, you can delete the existing partitions in whole or in part by selecting the appropriate part of the disk, and then the "Delete" option. After this, the unintended place on the disk formed after this, you are entitled to break down at its discretion to the above method, discussed in Embodiment 1.
If the current disk markup is completely satisfied, then you need to decide which existing sections You will install Windows 7 and whether you want to save the information existing there. In this case, before moving on, let's first get acquainted with possible options Installations, after which you can already take a thoughtful decision, not a finger in the sky.
You chose the section on which this moment Your old operating system is installed, and the data stored on it is planning to save. In this case, after pressing the Next button, before starting the installation, you will see a warning window that the previous copy of Windows with all its files and folders will be moved to the Windows.old folder. The rest of the information will be untouched. By clicking "OK", in the warning window, you will run the installation process.
There is one significant disadvantage in such an installation. As a rule, after long-term operation of the operating system, the section on which it was installed is very mild and contains quite a lot. unnecessary files. Adding the new operating system with the concomitant softwareYou will come across at least with an irrational use of a hard disk space, defragmentation of files and even possible overflow, which will undoubtedly reduce the speed of the system.
If you chose a segment of a hard disk system as a future system partition, and you want to save all the stored information on it, the setting will start immediately after pressing the Next button.
If you plan to install Windows 7 to a clean partition (preferred option from all) and you have already saved information on it elsewhere else, or you do not need it, then before installing it should be formatted. To do this, select "Format". The installer will display a warning that this section may contain important data for you and they will be destroyed.
After pressing the "OK" button, the selected part of the disk will be fully cleaned from the information stored there and to start the installation only to select the "Next" item.
Step 5. Installation and Initial Setup Windows 7
So, after selecting the system partition, the system installation process will begin directly, during which the files will be copied and unpacking, installing components and updates.
During installation, your computer will be automatically rebooted several times, and the whole procedure can take from 10 to 30 minutes, depending on its power.
Finally, after completing the installation and the next reboot of the computer, the first startup window appears before you. windows settingswhere you have to enter the username (the name of your account in the system) and the computer (name under which it will be visible on the network to other users).
On the next screen, you can create a password for your account or postpone this action, leaving the fields empty and pressing the "Next" button.
The next step will be the ability to select automatic parameters windows updatesintended to regularly check over the Internet Availability of all kinds of security fixes of the system, critical updates and service packs on the official website technical support. The inclusion of automatic update is desirable, but at this stage it is optional, since you can perform a more flexible setting of this parameter after installation from the control panel.
After selecting security settings, the Windows initial program will offer to check the date and time setting. If everything is true, click "Next".
If the network card drivers were installed during the installation, you will see the window. network settingsin which you will need to select the location of your computer.
After you choose, a network connection window will appear and apply the parameters.
On this initial setting Systems can be considered complete. After the final application of the parameters, the welcome window will appear before you, then the system will prepare the desktop, the appearance of which marks the completion of the Windows 7 installation.
Immediately after the installation is completed, you must install all the necessary drivers of the connected devices.
Remember! After installing Windows 7, you need to log into the BIOS again and return the load from the hard disk.
In contact with
If you still think that the installation of the operating system is a lesson for computer craftsmen, then you are seriously mistaken.
Using this manual, you can install Windows 7, even if you are a novice PC user. So, first preparation.
- Open "My computer" And look at what section you have the system at the moment.
Remember its size and name to then find the desired volume when installed. - Collect on the USB flash drive or another disk all required drivers For computer or laptop. If there is no drives with drivers, you can download them on the official website of the equipment manufacturer. If you do not do this, then risk after installing a new system to remain without the Internet.
- What showness Windows 7 Select -? Click « Control Panel -\u003e System and Security -\u003e System»
If more than 3 gigabytes are installed on your computer or laptop, it is definitely worth installing 64s discharge version. In general, the X86 recommend putting only on a weak or very obsolete iron in the yard of the 21st century, all the same :). Please note the driver for the same device in them differ in essence these are two different systems! - Download Installation ISO Image Windows 7:
What are these images?
These are original MSDN images downloaded from the official Microsoft website. The only change is unlocked the ability to select the editorial board when installing. No files are affected, the system is not activated.
Other veras windows images 7 can be downloaded. - Prepare blood flash drive With Windows 7. In this manual, we will install the system from the Flash drive, because it is faster and easier. Similar instructions how to create it can be found.
- Since when installing, we will format the disk with the installed system, then all the important files that are stored on it must be pre-copied to removable carrier or on another partition of the hard disk. Remember that the files located on the desktop are also stored on the disk with the system. If you need them - you definitely transfer them to another place. When formatting, all previously installed programs will be deleted, but this does not mean that they also need to be copied to flash drives and discs. Programs are easier to re-establish, so take care only about - Photos, documents, music, etc.
Create a bootable USB flash drive. Next, insert it into the USB port and change to BIOS-E Maternal Board boot priority in such a way that this flash drive is loaded. If difficulties arise at this step - here is the detailed instruction. If you have done everything correctly by changing the boot priority, then after exiting BIOS and restart the computer, the message "Press Any Key" will appear on the screen. Perform this requirement - press any key to start loading from the installation media.
Click the key only once and only at this stage of installation.
After pressing any key, a message appears that Windows downloads files.
System installation
So, proceed directly to installing Windows 7. Wait until your extraction is completed, after which the installer startup window appears on the screen. Congratulations, the most difficult already behind!
- Select language, time format and layout. Click "Further".
- Click on the big button "Install"To launch the installation wizard.
- Check out the license terms and accept them.
- Select a complete setting (no update suits us).
- After starting the full installation, the section selection screen appears.In the installer window there will be several sections:
First Usually reserved by the system (the recovery files are stored). It weighs 100 MB and you do not need to touch it. Second It is a system - that is, Windows stored on it. It is set to install a new system. The third Section - File. The user data that remains intact even after reinstalling Windows are stored here.
There may be other options: for example, no reserved system Section or No Tom with user files. In any case, you need the partition on which already stood previous System - Not in vain when preparing for installation, we advised you to see and remember its size.
If for some reason you still have one section, the volume of which exceeds 250 GB, then it is better to immediately divide the disk into two volumes: one for Windows and programs (about 50-100 GB), the second for personal files. To do this, using the "Disk Setup" tool, delete the existing partition and first create the first volume ("Create" - specify the volume - "apply") and then the second one.Created volumes must be called "Section 1", "Section 2". There should be no unstable space - its system simply will not see.
So, you have a minimum two partitions, one of which is allocated under the operating system files. If he is not just created, and was already previously, it needs to format, deleting all the data.
Click on the link "Disc Setup", highlight the section and click "Format". When formatting, all files from the system partition will be deleted (that is, the values \u200b\u200bin the "full size" columns and "freely" will become the same). This is what we achieved. To start clean installation, click "Further"By checking again that the partition that you was allocated to the system is highlighted. - We wait. After selecting the section and start the installation, a window will appear on the screen in which you can see the unpacking process. windows files 7 and their records on the hard disk. While you can relax - 15-25 minutes do not have to do anything.
During this installation time, the computer will reboot several times. After the installation is complete, you need to specify some system operation settings. - Enter computer name Computer name The computer name is how your computer will be called on the local network. and username. It is advisable to use Latin characters instead of Russians, it will help to avoid problems with some programs in the future.
- If you wish, you can install the administrator password, but it is optional. If you set a password, it will need to be entered each time the computer is launched or laptop. We will leave the field yet empty, "pass through" account maybe later.
- Enter the activation key if you have it. If there is no key, remove the mark "Automatically activate" And skip the step by clicking "Further".
- Specify Windows settings - it is better to choose the recommended parameters when you find out new system, configure it in your own. After choosing all the necessary parameters on the screen there will be a worker windows table 7. You can start your acquaintance with the system, but first overload the computer and go to the BIOS again - here you need to change the priority of the download, setting the hard disk to the first place.
- Turn on automatic update Systems and wait for the end of the process. With security updates, most drivers will be installed. If there is no Internet, you can use the program to install the drivers .
Attention!
Note: Choose TU windows versionFrom which you have an activation key (you will be entered at the final installation stage). If there is no key - learn the instructions after installation.
The instruction turned out to be sufficiently impressive by volume, but you now know the main nuances when installing Windows 7 and can easily do it yourself. Carefully follow the recommendations specified above and the installation will definitely pass successfully.